Revision notes

Unit 9 Surveying: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

What surveying is and why geographers need it

Uses of surveying

  • Mapping
    • Maps of the land and of the sea floor
    • Navigational maps and charts
  • Resources
    • Databases for natural resource management
    • Land records and boundaries
  • Engineering
    • Data for large buildings
    • Roads and railways
    • Bridges and dams
  • Planning
    • Layout of settlements
    • Town and regional planning
Common surveying methods (general background)
SurveyMain instrumentWhat it measures
Chain or tape surveyChain or measuring tapeHorizontal distances
Compass surveyPrismatic compassHorizontal angles (bearings) from magnetic north
Plane table surveyPlane table and alidadeDirections plotted directly on paper in the field
Height measurementClinometerVertical angles (angles of elevation and depression), used to find heights
LevellingDumpy level and staffDifferences in height between points
Theodolite surveyTheodoliteHorizontal and vertical angles with high precision

The two instruments of this unit

  • Clinometer
    • Measures vertical angles
    • Angle of elevation to the top of an object
    • Used with distance and eye-height to find height
    • Tree, pole, building, hill slope
  • Prismatic compass
    • Measures horizontal angles
    • Bearing from magnetic north, clockwise
    • Used with distances to plot a traverse
    • Plot corners, road bends, canal segments

Surveying = measuring distances, angles, heights and sizes in the field to make accurate plans and maps. Clinometer: vertical angles. Prismatic compass: horizontal angles (bearings).

Key takeaways: surveying measures and records distances, angles, heights and sizes to make accurate plans and maps, and it supports mapping, resource management, construction and planning. Different surveys use different instruments. The clinometer measures vertical angles and the prismatic compass measures horizontal angles from magnetic north; both are studied in this unit.

Read the full lesson

Lesson 2

The clinometer and how to take a reading in the field

A simple protractor clinometer
PartFunction
ProtractorScale in degrees that the string crosses
Straw along the straight edgeSighting tube to look at the top of the object
String with a weightHangs straight down (vertical) under gravity, so it marks the reading
AssistantReads the angle where the string crosses while you keep looking through the straw

Protractor clinometer: angle of elevation = 90° - reading where the string crosses the scale.

Measuring in the field

  1. Pick a spot Stand on level ground with the base of the object, far enough away to see its top clearly.
  2. Measure the angle Sight the top through the straw; the assistant reads the scale; subtract from 90°.
  3. Measure the distance Tape the horizontal distance from your spot to the base of the object.
  4. Measure eye-height Tape the height from the ground to your eye.
  5. Record Write all four values in a table before calculating.

Key takeaways: a clinometer measures vertical angles: elevation when looking up, depression when looking down. Its parts include a base, housing, circular scale, rotary member and spirit level; a protractor, straw and weighted string make a simple one. On a protractor clinometer, the angle of elevation is 90° minus the reading. In the field, choose level ground, then measure the angle, the distance to the base and your eye-height, and record them.

Read the full lesson

Lesson 3

Finding the height of an object with trigonometry

The labelled triangle

  • AC: adjacent side
    • Horizontal distance from eye to object
    • Measured with a tape on level ground
  • BC: opposite side
    • Height of the top above eye level
    • This is the unknown x
  • Angle at A
    • Angle of elevation
    • 90° minus the clinometer reading
  • CD
    • Eye-height of the observer
    • Added at the end

Height of object h = (distance × tan of angle of elevation) + eye-height. x = d × tan θ; h = x + eye-height.

Useful tangent values (rounded to 4 decimal places)
Angle θtan θ
25°0.4663
30°0.5774
35°0.7002
40°0.8391
45°1.0000
50°1.1918
60°1.7321

Key takeaways: model the survey as a right-angled triangle with the distance as the adjacent side and the height above eye level as the opposite side. x = d × tan θ, then h = x + eye-height. At 45° the height above eye level equals the distance. The same formula rearranged, d = x ÷ tan θ, gives a distance. Convert the reading, add eye-height and check that the answer is sensible.

Read the full lesson

Lesson 4

The prismatic compass: parts and functions

Parts of a prismatic compass and their functions
PartFunction
Magnetised needle on a pivotSwings freely and points to magnetic north
Graduated aluminium ringFixed to the needle; carries the degree markings that are read
Metal box with glass cover and lidProtects the needle and ring; the lid covers the glass when not in use
Prism with eye vane and sighting slitOn one side; magnifies the ring's markings and reflects them to the eye while you look through the slit
Sun glassesColoured glasses on a hinge in front of the prism, used when sighting towards the sun
Object (sighting) vane with a hairOn the opposite side; a frame with a fine vertical hair, silk thread or wire lined up with the object
Adjustable mirrorOn the object vane; used to sight objects that are too high or too low
Brake pin or knobStops the swinging ring so it can be read
Ball-and-socket arrangementScrews on to the stand and lets the compass be levelled

Taking a bearing with a prismatic compass

  1. Centre Set the stand directly over the station peg.
  2. Level Adjust the ball and socket until the ring swings freely and level.
  3. Sight Open the vanes; look through the slit and line up the hair with the ranging rod at the next station.
  4. Steady Press the brake pin gently to stop the ring swinging.
  5. Read and record Read the degree mark seen through the prism under the hair line and record it.

Needle + ring point to magnetic north; the object vane's hair is lined up with the object; the prism shows the reading in the same view; the brake pin steadies the ring.

Key takeaways: a prismatic compass has a magnetic needle on a pivot carrying a graduated aluminium ring, in a box with glass and lid. The prism on the eye vane magnifies and reflects the reading, the object vane has a fine hair to line up with the target, and sun glasses, a mirror, a brake pin and a ball-and-socket stand help in use. It measures plot corners, road bends and canal segments; keep iron away to avoid local attraction.

Read the full lesson

Lesson 5

Bearings and plotting a compass traverse

Whole-circle bearings of the main directions
DirectionBearing
North0° (or 360°)
North-east45°
East90°
South-east135°
South180°
South-west225°
West270°
North-west315°

Back bearing = fore bearing + 180° if the fore bearing is less than 180°; back bearing = fore bearing - 180° if it is 180° or more.

Two kinds of compass traverse

  • Open traverse
    • Starts and ends at different points
    • Used for a road, railway, river or canal
    • A meandering canal is divided into straight segments
    • No closing check on the plot itself
  • Closed traverse
    • Returns to the starting point
    • Used for the boundary of a field, plot or building
    • The plot should close on itself
    • A gap at the end shows the closing error

Key takeaways: a magnetic bearing is the horizontal angle of a line measured clockwise from magnetic north, from 0° to 360°. Back bearing = fore bearing ± 180°, and a mismatch warns of local attraction or a misreading. An open traverse follows a road, river or canal; a closed traverse goes round a plot and should return to the start. Plot each line at its bearing from a fresh north line and to scale.

Read the full lesson

Privacy · Terms · Refunds · Delivery