• Practice
  • About 15 min
  • 5 practice questions

The prismatic compass: parts and functions

Describe the parts of a prismatic compass, including the graduated ring, magnetic needle, prism, sighting vane, mirror, sun glasses, brake pin and ball-and-socket stand, and explain how a reading is taken.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name each part of a prismatic compass and state its function.
  • Explain how the prism lets the observer sight an object and read the bearing at the same time.
  • Follow the steps to set up the compass and take a bearing.

A pocket compass only tells you roughly where north is. A prismatic compass lets a surveyor measure the direction of a line to within a fraction of a degree, while looking at the object being sighted. It is light, quick to use and ideal for surveys of small areas, roads, field boundaries and streams.

How the compass is built

The heart of the instrument is a broad magnetic needle balanced on a hard steel pivot. Fixed on top of the needle is a light aluminium ring graduated in degrees, finely divided (to 30 minutes, that is half a degree). Because the ring is attached to the needle, the whole ring swings until the needle points to magnetic north. This assembly sits in a circular metal box with a transparent glass cover, and the glass is protected by a hinged metal lid.

Parts of a prismatic compass and their functions
PartFunction
Magnetised needle on a pivotSwings freely and points to magnetic north
Graduated aluminium ringFixed to the needle; carries the degree markings that are read
Metal box with glass cover and lidProtects the needle and ring; the lid covers the glass when not in use
Prism with eye vane and sighting slitOn one side; magnifies the ring's markings and reflects them to the eye while you look through the slit
Sun glassesColoured glasses on a hinge in front of the prism, used when sighting towards the sun
Object (sighting) vane with a hairOn the opposite side; a frame with a fine vertical hair, silk thread or wire lined up with the object
Adjustable mirrorOn the object vane; used to sight objects that are too high or too low
Brake pin or knobStops the swinging ring so it can be read
Ball-and-socket arrangementScrews on to the stand and lets the compass be levelled

The clever part is the prism. Its faces are shaped to magnify the degree marks on the ring and reflect them up to the eye. So, while your eye looks through the slit and lines up the hair of the object vane with a distant pole, you see the ring's reading just below, in the same view. In a prismatic compass the figures on the ring are usually written inverted and the zero is placed so that the figure seen through the prism is directly the bearing of the line sighted.

Taking a bearing with a prismatic compass

  1. Centre Set the stand directly over the station peg.
  2. Level Adjust the ball and socket until the ring swings freely and level.
  3. Sight Open the vanes; look through the slit and line up the hair with the ranging rod at the next station.
  4. Steady Press the brake pin gently to stop the ring swinging.
  5. Read and record Read the degree mark seen through the prism under the hair line and record it.

Uses and care

The chapter notes that the corners of a plot or building and the bends of a road can be measured directly with a prismatic compass, and that a meandering canal can be surveyed by dividing it into straight segments and taking the bearing of each. Because the needle is magnetic, keep iron and steel objects, such as keys, a mobile phone, an iron gate or electric cables, well away while reading. Their pull on the needle (called local attraction) gives wrong readings.

Needle + ring point to magnetic north; the object vane's hair is lined up with the object; the prism shows the reading in the same view; the brake pin steadies the ring.

Worked example 1: which part solves the problem?

Name the part needed in each case: (i) you are sighting a pole with the sun behind it; (ii) the ring keeps swinging and you cannot read it; (iii) the target is a water tank high on a hill. Answer: (i) the sun glasses; (ii) the brake pin; (iii) the adjustable mirror on the object vane.

Worked example 2: spotting an error

A student (made-up case) takes a bearing standing next to a parked motorcycle and gets 74°. A minute later, two metres away from it, she gets 71°. Which reading should be trusted and why? Reasoning: a large mass of iron near the compass attracts the needle. Answer: the 71° reading taken away from the motorcycle; the first was affected by local attraction. She should repeat it once more, clear of all iron objects, to confirm.

Key takeaways: a prismatic compass has a magnetic needle on a pivot carrying a graduated aluminium ring, in a box with glass and lid. The prism on the eye vane magnifies and reflects the reading, the object vane has a fine hair to line up with the target, and sun glasses, a mirror, a brake pin and a ball-and-socket stand help in use. It measures plot corners, road bends and canal segments; keep iron away to avoid local attraction.

Check your understanding

  1. 1. In a prismatic compass, the graduated ring is fixed to the:

    1. glass cover
    2. magnetic needle
    3. metal lid
    4. tripod stand
    Show answer

    Answer: B. The aluminium ring is fixed on top of the magnetic needle, so the whole ring turns with the needle as it settles towards magnetic north.

  2. 2. Which part stops the ring from swinging so that a reading can be taken?

    1. Sun glasses
    2. Mirror
    3. Object vane
    4. Brake pin
    Show answer

    Answer: D. The brake pin (or knob) brings the oscillating ring to a standstill. Sun glasses cut glare and the mirror helps sight high or low objects.

  3. 3. What does the prism do?

    1. Magnifies and reflects the ring's markings so they can be read while sighting
    2. Makes the needle point to true north
    3. Measures vertical angles
    4. Holds the compass on the stand
    Show answer

    Answer: A. The prism magnifies the degree marks on the ring and reflects them to the eye, so the observer can read the bearing while lining up the object.

  4. 4. The fine vertical hair, silk thread or wire of a prismatic compass is found on the:

    1. eye vane with the prism
    2. aluminium ring
    3. object (sighting) vane
    4. ball and socket
    Show answer

    Answer: C. The object or sighting vane is a hinged frame with a fine hair at its centre, which is lined up with the object being sighted.

  5. 5. Why should a mobile phone or keys be kept away from a prismatic compass while reading?

    1. They block the view through the slit
    2. They make the ring heavier
    3. They change the scale of the map
    4. Iron and electronics can pull the needle and give wrong bearings
    Show answer

    Answer: D. The needle is magnetic. Nearby iron, steel or electrical objects deflect it, an error called local attraction, so readings must be taken away from them.

Privacy · Terms · Refunds · Delivery