• Practice
  • About 15 min
  • 5 practice questions

The clinometer and how to take a reading in the field

Describe the parts of a clinometer, explain angles of elevation and depression, convert a clinometer reading to the angle of vision, and follow the field steps of choosing a spot and measuring angle, distance and eye-height.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name the parts of a clinometer and state what each does.
  • Tell an angle of elevation from an angle of depression.
  • Carry out the first four field steps for measuring the height of an object.

How tall is the tallest tree in your school? You cannot climb it with a tape, but you can find its height from the ground with a clinometer, a tape and a little trigonometry. This lesson covers the instrument and the field measurements; the next lesson covers the calculation.

Angles of elevation and depression

Imagine a horizontal line from your eye. When you look up at the top of a tree, the angle between the horizontal and your line of sight is the angle of elevation. When you look down, for example from a hilltop at a boat in a lake, the angle between the horizontal and your line of sight is the angle of depression. A clinometer measures both.

Parts of a clinometer

A surveyor's clinometer, as shown in the chapter's figure, has a base, a housing that holds a circular scale marked in degrees, a rotary member that turns to line up with the object, and a spirit level to show when the instrument is level. A simple classroom clinometer can be made from a protractor, a drinking straw taped along its straight edge as the sight, and a string with a small weight hanging from the protractor's centre.

A simple protractor clinometer
PartFunction
ProtractorScale in degrees that the string crosses
Straw along the straight edgeSighting tube to look at the top of the object
String with a weightHangs straight down (vertical) under gravity, so it marks the reading
AssistantReads the angle where the string crosses while you keep looking through the straw

Reading the angle: subtract from 90°

On a protractor clinometer, the string always hangs vertically. When the straw is level, the string crosses the 90° mark. When you tilt the straw up towards a treetop, the string crosses a smaller number. The angle the string makes with the straight edge is therefore the angle from the vertical, not from the horizontal. To get the angle of elevation (your angle of vision), subtract the reading from 90°.

Protractor clinometer: angle of elevation = 90° - reading where the string crosses the scale.

Field steps

Measuring in the field

  1. Pick a spot Stand on level ground with the base of the object, far enough away to see its top clearly.
  2. Measure the angle Sight the top through the straw; the assistant reads the scale; subtract from 90°.
  3. Measure the distance Tape the horizontal distance from your spot to the base of the object.
  4. Measure eye-height Tape the height from the ground to your eye.
  5. Record Write all four values in a table before calculating.

Why must the ground be level? The calculation assumes a right-angled triangle whose base is horizontal and at the same level as the foot of the object. If the object stands on a mound or in a hollow, the answer will be wrong. Standing too close makes the angle very steep and hard to read; a distance roughly equal to the expected height (an angle near 45°) gives a good reading.

Worked example 1: converting readings

Three students sighting different objects read the string at 50°, 62° and 45°. Find each angle of elevation. Working: 90° - 50° = 40°; 90° - 62° = 28°; 90° - 45° = 45°. Answer: 40°, 28° and 45°. Check: a larger reading means the straw is closer to level, so the angle of elevation is smaller, which fits 62° giving 28°.

Worked example 2: a record sheet

A made-up field record for a water tank: reading on the scale 48°; distance from spot to base 22 m; eye-height 1.55 m. First derived value: angle of elevation = 90° - 48° = 42°. The record is now complete with angle 42°, distance 22 m and eye-height 1.55 m, ready for the calculation in the next lesson. Keeping such a table avoids mixing up the scale reading and the angle of elevation, which is the commonest error.

Key takeaways: a clinometer measures vertical angles: elevation when looking up, depression when looking down. Its parts include a base, housing, circular scale, rotary member and spirit level; a protractor, straw and weighted string make a simple one. On a protractor clinometer, the angle of elevation is 90° minus the reading. In the field, choose level ground, then measure the angle, the distance to the base and your eye-height, and record them.

Check your understanding

  1. 1. The angle between the horizontal and the line of sight when looking up at the top of a tower is called the:

    1. angle of depression
    2. bearing
    3. angle of elevation
    4. back bearing
    Show answer

    Answer: C. Looking up from the horizontal gives an angle of elevation; looking down gives an angle of depression. Bearings are horizontal angles.

  2. 2. On a protractor clinometer, the string crosses 57° when the top of a tree is sighted. The angle of elevation is:

    1. 57°
    2. 33°
    3. 147°
    4. 43°
    Show answer

    Answer: B. The reading is measured from the vertical, so the angle of elevation is 90° - 57° = 33°.

  3. 3. Which part of a surveyor's clinometer shows that the instrument is level?

    1. Spirit level
    2. Circular scale
    3. Housing
    4. Base
    Show answer

    Answer: A. The spirit level's bubble shows when the instrument is horizontal. The circular scale gives the angle, and the housing and base hold the parts.

  4. 4. Why should the observer stand on level ground with the base of the object?

    1. Because the clinometer works only in sunlight
    2. Because the eye-height then becomes zero
    3. Because it makes the tape longer
    4. Because the calculation assumes a horizontal base level with the foot of the object
    Show answer

    Answer: D. The method models a right-angled triangle with a horizontal base at the level of the object's foot. Sloping ground breaks that assumption and gives a wrong height.

  5. 5. If a protractor clinometer is held perfectly level, where does the weighted string cross the scale?

    1. At 0°
    2. At 45°
    3. At 90°
    4. At 180°
    Show answer

    Answer: C. The string hangs vertically and is at right angles to the level straight edge, so it crosses 90°. The angle of elevation is then 90° - 90° = 0°, as expected for a level sight.

Privacy · Terms · Refunds · Delivery