- Practice
- About 16 min
- 5 practice questions
Conic sections, degenerate forms, identifying a conic and parametric equations
Describe conics as plane sections of a double cone, recognise degenerate forms, identify the conic given by a second degree equation, and use the parametric forms of the circle, parabola, ellipse and hyperbola.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain how a plane cutting a double napped cone gives a circle, ellipse, parabola or hyperbola.
- Name the degenerate forms: a point, a line, two parallel lines, two intersecting lines, or the empty set.
- Identify the conic from Ax² + Bxy + Cy² + Dx + Ey + F = 0 when B = 0.
- Write and use the parametric equations of the four curves.
The four curves of this chapter have one family name, conics, because all of them are cut from a cone. This lesson looks at them in that way, shows how to recognise one from its equation without drawing it, and introduces parametric equations, which describe a point moving along the curve.
Conics as sections of a cone
Picture two cones joined tip to tip along one axis: a double napped cone. Cut it with a plane. If the plane is perpendicular to the axis and cuts one nape, the section is a circle. Tilt the plane a little, still cutting only one nape all the way round, and the section is an ellipse. Tilt it until it is parallel to a side (a generator) of the cone, and the section is a parabola. If the plane is parallel to the axis, it cuts both napes and the section is a hyperbola, with one branch on each nape.
Tilting the cutting plane
- Perpendicular to the axis Circle
- Tilted, cutting one nape all round Ellipse
- Parallel to a generator Parabola
- Parallel to the axis, cutting both napes Hyperbola
Degenerate forms
When the cutting plane passes through the vertex of the cone, the section degenerates. A plane through the vertex perpendicular to the axis gives a single point (a point circle). A plane through the vertex along a generator gives a single line, a degenerate parabola; when the cone becomes a cylinder, a plane parallel to its axis gives a pair of parallel lines. A plane through the vertex containing the axis gives two intersecting lines, a degenerate hyperbola.
Identifying a conic from its equation
For Ax² + Bxy + Cy² + Dx + Ey + F = 0, the Tamil Nadu textbook lists these cases (at this level B = 0, so there is no xy term):
- A = C (non-zero), and the equation can be brought to (x − h)² + (y − k)² = r²: a circle.
- B = 0 and either A = 0 or C = 0 (but not both): a parabola.
- A ≠ C, with A and C of the same sign: an ellipse.
- A ≠ C, with A and C of opposite signs: a hyperbola.
- A = C and B = D = E = F = 0: the point x² + y² = 0.
- A = C = F and B = D = E = 0: the empty set, for example x² + y² + 1 = 0.
- A = −C and all other coefficients zero: a pair of lines, for example x² − y² = 0, which is (x − y)(x + y) = 0.
- A ≠ 0 or C ≠ 0 with all other coefficients zero: the coordinate axes (for example x² = 0 is the y-axis, counted twice).
These agree with the discriminant test of Lesson 2: with B = 0, B² − 4AC = −4AC, which is negative when A and C have the same sign (ellipse or circle), zero when one of them is 0 (parabola) and positive when they have opposite signs (hyperbola).
Worked example 1: four equations
(i) 3x² + 3y² − 6x + 12y − 1 = 0: A = C = 3, no xy term, and dividing by 3 gives g = −1, f = 2, c = −1/3 with g² + f² − c = 16/3 > 0: a circle. (ii) y² − 8x + 2y + 17 = 0: A = 0, C = 1: a parabola. Indeed (y + 1)² = 8x − 16 = 8(x − 2). (iii) 5x² + 2y² − 10x = 0: A = 5, C = 2, same sign: an ellipse. (iv) 4x² − 9y² + 8x + 18y − 41 = 0: A = 4, C = −9, opposite signs: a hyperbola.
Worked example 2: degenerate equations
(i) 9x² − y² = 0 factorises as (3x − y)(3x + y) = 0: the pair of lines y = 3x and y = −3x. (ii) x² + y² + 4 = 0: a sum of squares plus 4 is never zero, so the graph is the empty set. (iii) x² + y² = 0: only (0, 0) satisfies it, a point.
Parametric equations
If f(t) and g(t) are functions of a variable t, the pair x = f(t), y = g(t) describes a curve; t is called a parameter. A useful picture is that t is time and (f(t), g(t)) is the position of a moving object. For the circle x² + y² = a², if OP makes angle θ with the x-axis, then x = a cos θ and y = a sin θ. The parametric form is not unique, and it replaces two related variables by one.
| Curve | Parametric equations | Parameter range | General point |
|---|---|---|---|
| Circle x² + y² = a² | x = a cos θ, y = a sin θ | 0 ≤ θ ≤ 2π | (a cos θ, a sin θ) |
| Parabola y² = 4ax | x = at², y = 2at | −∞ < t < ∞ | (at², 2at) |
| Ellipse x²/a² + y²/b² = 1 | x = a cos θ, y = b sin θ | 0 ≤ θ ≤ 2π | (a cos θ, b sin θ) |
| Hyperbola x²/a² − y²/b² = 1 | x = a sec θ, y = b tan θ | −π ≤ θ ≤ π, θ ≠ ±π/2 | (a sec θ, b tan θ) |
Worked example 3: from parametric to Cartesian
(i) x = 3 cos θ, y = 2 sin θ: cos θ = x/3 and sin θ = y/2, and cos²θ + sin²θ = 1 gives x²/9 + y²/4 = 1, an ellipse. (ii) x = 2 sec θ, y = 3 tan θ: sec²θ − tan²θ = 1 gives x²/4 − y²/9 = 1, a hyperbola. (iii) x = 4t², y = 8t: t = y/8, so x = 4y²/64 = y²/16, that is y² = 16x, a parabola with a = 4.
Worked example 4: a point from its parameter
Find the point θ = π/3 on x²/16 + y²/9 = 1. Working: (4 cos(π/3), 3 sin(π/3)) = (4 × 1/2, 3 × √3/2) = (2, 3√3/2). Check: 4/16 + (27/4)/9 = 1/4 + 3/4 = 1.
Same signs of x² and y² (unequal): ellipse. Opposite signs: hyperbola. Only one square: parabola. Equal coefficients, no xy: circle. Parametric points: (a cos θ, a sin θ), (at², 2at), (a cos θ, b sin θ), (a sec θ, b tan θ).
Key takeaways: the tilt of the cutting plane decides the conic, and a plane through the vertex gives a degenerate form. With no xy term, compare the coefficients of x² and y² to identify the conic, but watch for equations that factorise into lines or have no real points. Parametric forms come from cos²θ + sin²θ = 1 and sec²θ − tan²θ = 1.
Check your understanding
-
1. Identify 4x² + 9y² − 8x + 36y + 4 = 0.
- Circle
- Parabola
- Ellipse
- Hyperbola
Show answer
Answer: C. A = 4 and C = 9 are unequal and of the same sign, and there is no xy term, so the conic is an ellipse. (Completing squares: 4(x − 1)² + 9(y + 2)² = 36.)
-
2. Identify y² − 4x + 6y + 1 = 0.
- Circle
- Parabola
- Ellipse
- Hyperbola
Show answer
Answer: B. There is a y² term but no x² term (A = 0, C = 1), so it is a parabola: (y + 3)² = 4x + 8 = 4(x + 2).
-
3. What is the graph of x² − 4y² = 0?
- A single point
- The empty set
- A parabola
- A pair of intersecting lines
Show answer
Answer: D. x² − 4y² = (x − 2y)(x + 2y) = 0, so the graph is the two lines x = 2y and x = −2y, which meet at the origin: a degenerate hyperbola.
-
4. Which curve is given by x = 5 cos θ, y = 3 sin θ?
- x²/25 + y²/9 = 1
- x²/25 − y²/9 = 1
- x² + y² = 34
- y² = 15x
Show answer
Answer: A. cos θ = x/5 and sin θ = y/3. Since cos²θ + sin²θ = 1, x²/25 + y²/9 = 1.
-
5. Which point of x²/4 − y²/3 = 1 has parameter θ = π/3 in the form (a sec θ, b tan θ)?
- (2, √3)
- (4, 3)
- (1, 3/2)
- (4, √3)
Show answer
Answer: B. a = 2, b = √3. sec(π/3) = 2 and tan(π/3) = √3, so the point is (2 × 2, √3 × √3) = (4, 3). Check: 16/4 − 9/3 = 4 − 3 = 1.
Sign in to keep track of the lessons you finish.