• Practice
  • About 17 min
  • 5 practice questions

The circle: standard and general equations, diameter form and position of a point

Write the equation of a circle from its centre and radius or from the ends of a diameter, find the centre and radius from the general equation, form a circle through the meeting points of a line and a circle, and test whether a point is inside, on or outside.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write the equation of a circle in centre-radius form and in general form.
  • Recognise when a second degree equation represents a circle, and find its centre and radius.
  • Tell a real circle from a point circle and an imaginary circle.
  • Write the circle on a given diameter, and a circle through the points where a line meets a circle.
  • Decide whether a point lies outside, on or inside a circle.

Analytical geometry describes curves by equations, so that geometric questions become algebra. In this chapter of the Tamil Nadu textbook we study the circle, parabola, ellipse and hyperbola. They appear everywhere: wheels and gears are circles, dish antennas are parabolic, planets move in ellipses, and cooling towers have hyperbolic outlines. We begin with the circle.

Equation of a circle

A circle is the locus of a point that moves in a plane so that its distance from a fixed point is constant. The fixed point is the centre and the constant distance is the radius. If the centre is C(h, k), the radius is r and P(x, y) is any point on the circle, then CP = r, so CP² = r², which gives the standard (centre-radius) form: (x − h)² + (y − k)² = r². With centre at the origin this is x² + y² = r².

Expanding gives x² + y² − 2hx − 2ky + h² + k² − r² = 0. Writing 2g = −2h, 2f = −2k and c = h² + k² − r², we get the general form x² + y² + 2gx + 2fy + c = 0. Completing the squares, (x + g)² + (y + f)² = g² + f² − c, so the centre is (−g, −f) and the radius is √(g² + f² − c).

  • A second degree equation in x and y is a circle when the coefficients of x² and y² are equal and non-zero and there is no xy term. Divide through by the common coefficient first.
  • If g² + f² − c > 0 it is a real circle.
  • If g² + f² − c = 0 it is a point circle (radius 0, just the centre).
  • If g² + f² − c < 0 it is an imaginary circle: no point satisfies it.

Worked example 1: from centre and radius to general form

Centre (2, −5), radius 4. Working: (x − 2)² + (y + 5)² = 16. Expand: x² − 4x + 4 + y² + 10y + 25 = 16. So x² + y² − 4x + 10y + 13 = 0. Check with the formulas: g = −2, f = 5, c = 13 give centre (2, −5) and radius √(4 + 25 − 13) = √16 = 4.

Worked example 2: centre and radius from a general equation

Find the centre and radius of 2x² + 2y² − 8x + 12y − 6 = 0. Working: the coefficients of x² and y² are equal and there is no xy term, so it is a circle. Divide by 2: x² + y² − 4x + 6y − 3 = 0. Here 2g = −4, 2f = 6, c = −3, so g = −2 and f = 3. Centre (−g, −f) = (2, −3); radius = √(4 + 9 + 3) = √16 = 4.

Worked example 3: nature of a circle

x² + y² + 4x − 6y + 13 = 0: g = 2, f = −3, c = 13, and g² + f² − c = 4 + 9 − 13 = 0. So this is a point circle: the single point (−2, 3). Indeed it can be written (x + 2)² + (y − 3)² = 0.

The circle on a diameter

If A(x₁, y₁) and B(x₂, y₂) are the ends of a diameter and P(x, y) is any other point on the circle, then the angle APB is a right angle (the angle in a semicircle). So the product of the slopes of AP and BP is −1, which simplifies to (x − x₁)(x − x₂) + (y − y₁)(y − y₂) = 0.

Worked example 4: diameter form

The ends of a diameter are (−1, 2) and (3, −4). Working: (x + 1)(x − 3) + (y − 2)(y + 4) = 0, that is x² − 2x − 3 + y² + 2y − 8 = 0, so x² + y² − 2x + 2y − 11 = 0. Check: the centre (1, −1) is the midpoint of the two ends, and the radius² is 1 + 1 + 11 = 13, equal to the squared distance from (1, −1) to (3, −4), which is 2² + 3² = 13.

A circle through the meeting points of a line and a circle

Let S = x² + y² + 2gx + 2fy + c and L = lx + my + n. For any number λ, the equation S + λL = 0 is still of second degree with equal coefficients of x² and y² and no xy term, so it is a circle; and every point that satisfies both S = 0 and L = 0 satisfies it. So S + λL = 0 is a circle through the points (real or imaginary) where the line meets the circle. One extra condition fixes λ.

Worked example 5: fixing λ

Find the circle through the meeting points of x² + y² = 25 and x + y = 1 that also passes through the origin. Working: x² + y² − 25 + λ(x + y − 1) = 0. Put (0, 0): −25 + λ(−1) = 0, so λ = −25. The circle is x² + y² − 25 − 25x − 25y + 25 = 0, that is x² + y² − 25x − 25y = 0.

Position of a point

A point P(x₁, y₁) lies outside, on or inside the circle x² + y² + 2gx + 2fy + c = 0 according as x₁² + y₁² + 2gx₁ + 2fy₁ + c is greater than, equal to or less than 0. The expression equals CP² − r², where C is the centre.

Worked example 6: three points

Circle x² + y² − 4x + 2y − 20 = 0. For (1, 1): 1 + 1 − 4 + 2 − 20 = −20 < 0, inside. For (7, −1): 49 + 1 − 28 − 2 − 20 = 0, on the circle. For (6, 3): 36 + 9 − 24 + 6 − 20 = 7 > 0, outside. (The centre is (2, −1) and the radius is √(4 + 1 + 20) = 5; (7, −1) is exactly 5 units to its right.)

Reading a general equation x² + y² + 2gx + 2fy + c = 0

  • Centre
    • (−g, −f)
    • Halve the x and y coefficients and change the sign
  • Radius
    • √(g² + f² − c)
    • Positive: real circle
    • Zero: point circle
    • Negative under the root: imaginary circle
  • Point (x₁, y₁)
    • Substitute into the left side
    • > 0 outside, = 0 on, < 0 inside

x² + y² + 2gx + 2fy + c = 0 has centre (−g, −f) and radius √(g² + f² − c). Circle on diameter AB: (x − x₁)(x − x₂) + (y − y₁)(y − y₂) = 0.

— Circle formulas

Key takeaways: make the coefficients of x² and y² equal to 1 before reading off g, f and c. The sign of g² + f² − c tells a real circle from a point or imaginary circle. Use the diameter form when two ends of a diameter are known, and S + λL = 0 for circles through the meeting points of a line and a circle.

Check your understanding

  1. 1. Find the centre and radius of x² + y² + 6x − 8y = 0.

    1. Centre (3, −4), radius 5
    2. Centre (−3, 4), radius 5
    3. Centre (−3, 4), radius 25
    4. Centre (6, −8), radius 10
    Show answer

    Answer: B. 2g = 6 and 2f = −8 give g = 3, f = −4 and c = 0. Centre (−g, −f) = (−3, 4); radius √(9 + 16 − 0) = 5.

  2. 2. Which equation represents a point circle?

    1. x² + y² − 2x + 4y + 4 = 0
    2. x² + y² − 2x + 4y + 6 = 0
    3. x² + y² − 2x + 4y + 5 = 0
    4. x² + y² = 5
    Show answer

    Answer: C. With g = −1, f = 2: g² + f² − c = 1 + 4 − c. This is 0 only when c = 5. c = 4 gives radius 1, c = 6 gives a negative value (imaginary), and x² + y² = 5 has radius √5.

  3. 3. What is the equation of the circle with (0, 0) and (4, 6) as ends of a diameter?

    1. x² + y² − 4x − 6y = 0
    2. x² + y² + 4x + 6y = 0
    3. x² + y² − 4x − 6y − 13 = 0
    4. x² + y² − 2x − 3y = 0
    Show answer

    Answer: A. Diameter form: (x − 0)(x − 4) + (y − 0)(y − 6) = 0, so x² − 4x + y² − 6y = 0. Check: the centre (2, 3) is the midpoint of the two ends.

  4. 4. Where does the point (2, 3) lie with respect to x² + y² − 4x − 2y − 4 = 0?

    1. Outside the circle
    2. On the circle
    3. It cannot be decided
    4. Inside the circle
    Show answer

    Answer: D. Substitute: 4 + 9 − 8 − 6 − 4 = −5, which is less than 0, so the point is inside.

  5. 5. The equation px² + 4y² + qxy − 8x + 2y = 0 represents a circle. Find p and q.

    1. p = 0, q = 4
    2. p = −4, q = 0
    3. p = 4, q = 0
    4. p = 4, q = 4
    Show answer

    Answer: C. For a circle the coefficients of x² and y² must be equal, so p = 4, and there must be no xy term, so q = 0.

Privacy · Terms · Refunds · Delivery