- Practice
- About 19 min
- 5 practice questions
Tangents and normals to conics and real-life applications
Write tangents and normals to a parabola, ellipse and hyperbola in Cartesian and parametric form, use the condition for y = mx + c to be a tangent, and solve problems on arches, dishes and reflectors.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write the tangent and normal to y² = 4ax, x²/a² + y²/b² = 1 and x²/a² − y²/b² = 1 at a point or a parameter.
- Use the condition for y = mx + c to touch each conic, and find the point of contact.
- State the results on the number of tangents and normals from a point, and the director circle.
- Apply conics to arches, dish antennas and reflectors.
Tangents to conics are behind some very practical designs. A headlight works because every ray from the focus of a parabolic mirror reflects along the axis; an elliptical reflector sends a wave from one focus to the other. In this lesson we write the equations of tangents and normals and then use conics to solve design problems.
Tangent and normal to the parabola y² = 4ax
For two points P(x₁, y₁), Q(x₂, y₂) on the parabola, y₁² − y₂² = 4a(x₁ − x₂), so the chord PQ has slope 4a/(y₁ + y₂). As Q moves to P, the slope becomes 2a/y₁, and the tangent at (x₁, y₁) simplifies to yy₁ = 2a(x + x₁). The normal has slope −y₁/(2a), giving xy₁ + 2ay = x₁y₁ + 2ay₁. At the parametric point (at², 2at): tangent yt = x + at², normal y = −tx + 2at + at³.
Writing the normal with slope m = −t gives y = mx − 2am − am³. If it passes through a given point (α, β), then am³ + (2a − α)m + β = 0, a cubic in m. So in general three normals can be drawn to a parabola from a point, and at least one of them is real, since a cubic with real coefficients always has a real root.
Worked example 1: a parabola
Tangent and normal to y² = 8x at (2, 4). Here 4a = 8, a = 2. Tangent: 4y = 2·2(x + 2), so y = x + 2, that is x − y + 2 = 0. Normal: 4x + 4y = 2·4 + 4·4 = 24, that is x + y − 6 = 0. Check with the parameter: (2t², 4t) = (2, 4) gives t = 1; tangent y = x + 2 and normal y = −x + 4 + 2 = −x + 6. Both agree.
Tangent and normal to the ellipse and the hyperbola
| Curve | Tangent at (x₁, y₁) | Tangent at θ | Normal at (x₁, y₁) | Normal at θ |
|---|---|---|---|---|
| Ellipse x²/a² + y²/b² = 1 | xx₁/a² + yy₁/b² = 1 | (x cos θ)/a + (y sin θ)/b = 1 | a²x/x₁ − b²y/y₁ = a² − b² | ax/cos θ − by/sin θ = a² − b² |
| Hyperbola x²/a² − y²/b² = 1 | xx₁/a² − yy₁/b² = 1 | (x sec θ)/a − (y tan θ)/b = 1 | a²x/x₁ + b²y/y₁ = a² + b² | ax/sec θ + by/tan θ = a² + b² |
A quick way to remember the tangent at (x₁, y₁): in the equation of the curve, replace x² by xx₁, y² by yy₁, and (for the parabola) x by (x + x₁)/2.
Worked example 2: an ellipse
Tangent and normal to x²/8 + y²/2 = 1 at (2, 1). Check: 4/8 + 1/2 = 1. Tangent: 2x/8 + y/2 = 1, that is x/4 + y/2 = 1, or x + 2y = 4. Normal: 8x/2 − 2y/1 = 8 − 2, so 4x − 2y = 6, or 2x − y = 3. Check: (2, 1) gives 4 − 1 = 3, and the slopes −1/2 and 2 multiply to −1.
Worked example 3: a hyperbola
Tangent and normal to x²/9 − y²/4 = 1 at (5, 8/3). Check: 25/9 − (64/9)/4 = 25/9 − 16/9 = 1. Tangent: 5x/9 − (8/3)y/4 = 1, that is 5x/9 − 2y/3 = 1, or 5x − 6y = 9. Normal: 9x/5 + 4y/(8/3) = 9 + 4, that is 9x/5 + 3y/2 = 13; multiply by 10: 18x + 15y = 130. Check: 90 + 40 = 130, and the slopes 5/6 and −6/5 multiply to −1.
When is y = mx + c a tangent?
- Parabola y² = 4ax: c = a/m; point of contact (a/m², 2a/m); tangent y = mx + a/m.
- Ellipse x²/a² + y²/b² = 1: c² = a²m² + b²; point of contact (−a²m/c, b²/c); tangents y = mx ± √(a²m² + b²).
- Hyperbola x²/a² − y²/b² = 1: c² = a²m² − b²; point of contact (−a²m/c, −b²/c); tangents y = mx ± √(a²m² − b²).
In the ± forms only one sign gives the tangent at a particular point; the two signs give the two parallel tangents of slope m. Further results stated in the Tamil Nadu textbook: from an external point two tangents can be drawn to a parabola, ellipse or hyperbola, and four normals to an ellipse or hyperbola. Perpendicular tangents meet on the directrix x = −a for y² = 4ax, on the director circle x² + y² = a² + b² for the ellipse, and on x² + y² = a² − b² for the hyperbola.
Worked example 4: conditions in action
(i) y = 2x + c touches y² = 8x: a = 2, so c = a/m = 2/2 = 1, with point of contact (a/m², 2a/m) = (1/2, 2). Check: 2² = 4 = 8 × 1/2. (ii) Tangents of slope 1 to x²/16 + y²/9 = 1: c² = 16 × 1 + 9 = 25, so y = x ± 5. For c = 5 the point of contact is (−16/5, 9/5); check: (256/25)/16 + (81/25)/9 = 16/25 + 9/25 = 1.
Conics in real life
Parabola. Headlights, torches and searchlights have parabolic mirrors with the bulb at the focus, so the reflected light leaves parallel to the axis. Dish antennas and solar cookers work the other way: rays arriving parallel to the axis are reflected into the focus. Parabolic arches are used in bridges for their strength. Ellipse. Kepler found that planets move in elliptical orbits with the Sun at one focus. A ray or sound leaving one focus of an elliptical reflector reaches the other focus; a lithotripter uses this to focus shock waves on a kidney stone. Elliptical arches are common in bridges. Hyperbola. Some comets pass the Sun once along a hyperbolic path; hyperbolic shapes appear in cooling towers and in methods of locating ships.
Which property does each design use?
-
Parabola
- Rays parallel to the axis meet at the focus
- Dish antenna, solar cooker
- Headlight: bulb at the focus
-
Ellipse
- Rays from one focus meet at the other
- Lithotripter
- Planet orbits with the Sun at a focus
-
Hyperbola
- |PS − PS′| is constant
- Locating a ship from two stations
- Cooling tower outlines
Worked example 5: a boat under a semi-elliptical arch (made-up numbers)
A bridge has a semi-elliptical arch 16 m wide at water level and 5 m high at the centre. Can a boat 6 m wide and 4.5 m tall pass if it keeps to the middle? Working: take the centre of the base as origin. Then a = 8, b = 5 and the arch is x²/64 + y²/25 = 1, y ≥ 0. The boat's edges are 3 m from the centre, where y² = 25(1 − 9/64) = 25 × 55/64, so y = 5√55/8 ≈ 5 × 7.416/8 ≈ 4.64 m. Since 4.64 > 4.5, the boat passes, with about 0.14 m to spare at its edges.
Worked example 6: where to place the receiver (made-up numbers)
A parabolic dish is 120 cm across and 20 cm deep. Take its vertex at the origin with the axis upward: x² = 4ay. The rim point (60, 20) lies on it, so 3600 = 4a × 20 = 80a and a = 45 cm. The receiver should sit at the focus, 45 cm above the vertex along the axis.
Tangents at (x₁, y₁): yy₁ = 2a(x + x₁); xx₁/a² + yy₁/b² = 1; xx₁/a² − yy₁/b² = 1. Tangency of y = mx + c: c = a/m; c² = a²m² + b²; c² = a²m² − b².
Key takeaways: write the tangent by replacing x² with xx₁ and y² with yy₁; the normal is perpendicular to it through the same point. Use the tangency conditions to find c and the point of contact. In applications, place the curve with its vertex or centre at the origin, write its equation from the given measurements, then substitute.
Check your understanding
-
1. What is the tangent to y² = 12x at (3, 6)?
- x − y + 3 = 0
- x + y − 9 = 0
- 2x − y = 0
- x − 2y + 9 = 0
Show answer
Answer: A. 4a = 12 so a = 3. Tangent yy₁ = 2a(x + x₁): 6y = 6(x + 3), so y = x + 3, that is x − y + 3 = 0.
-
2. For what value of c is y = 3x + c a tangent to y² = 12x?
- 3
- 1/3
- 1
- 4
Show answer
Answer: C. For y² = 4ax the condition is c = a/m. Here a = 3 and m = 3, so c = 1.
-
3. The condition for y = mx + c to touch the hyperbola x²/a² − y²/b² = 1 is
- c = a/m
- c² = a²(1 + m²)
- c² = a²m² + b²
- c² = a²m² − b²
Show answer
Answer: D. For the hyperbola it is c² = a²m² − b². c² = a²m² + b² is for the ellipse, c = a/m for the parabola y² = 4ax, and c² = a²(1 + m²) for the circle x² + y² = a².
-
4. What is the tangent to x²/18 + y²/8 = 1 at (3, 2)?
- 3x + 2y = 12
- 2x + 3y = 12
- 2x − 3y = 0
- 3x − 2y = 5
Show answer
Answer: B. Tangent xx₁/a² + yy₁/b² = 1: 3x/18 + 2y/8 = 1, that is x/6 + y/4 = 1. Multiply by 12: 2x + 3y = 12. Check: 6 + 6 = 12.
-
5. A parabolic dish (made-up numbers) is 80 cm across and 10 cm deep. How far from the vertex is its focus?
- 10 cm
- 20 cm
- 40 cm
- 80 cm
Show answer
Answer: C. With x² = 4ay, the rim point (40, 10) gives 1600 = 4a × 10 = 40a, so a = 40 cm. The focus is 40 cm from the vertex.
Sign in to keep track of the lessons you finish.