Revision notes

Chapter 5 Two Dimensional Analytical Geometry-II: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

The circle: standard and general equations, diameter form and position of a point

Reading a general equation x² + y² + 2gx + 2fy + c = 0

  • Centre
    • (−g, −f)
    • Halve the x and y coefficients and change the sign
  • Radius
    • √(g² + f² − c)
    • Positive: real circle
    • Zero: point circle
    • Negative under the root: imaginary circle
  • Point (x₁, y₁)
    • Substitute into the left side
    • > 0 outside, = 0 on, < 0 inside

x² + y² + 2gx + 2fy + c = 0 has centre (−g, −f) and radius √(g² + f² − c). Circle on diameter AB: (x − x₁)(x − x₂) + (y − y₁)(y − y₂) = 0.

— Circle formulas

Key takeaways: make the coefficients of x² and y² equal to 1 before reading off g, f and c. The sign of g² + f² − c tells a real circle from a point or imaginary circle. Use the diameter form when two ends of a diameter are known, and S + λL = 0 for circles through the meeting points of a line and a circle.

Read the full lesson

Lesson 2

Tangents to a circle, the focus-directrix definition of a conic, and the parabola

Conics by eccentricity

  • e = 1: parabola
    • SP = PM
    • B² − 4AC = 0
    • One focus, one directrix
  • 0 < e < 1: ellipse
    • SP < PM
    • B² − 4AC < 0
    • Two foci, two directrices
  • e > 1: hyperbola
    • SP > PM
    • B² − 4AC > 0
    • Two foci, two directrices, two asymptotes
Standard parabolas with vertex at the origin (a > 0)
EquationOpensFocusDirectrixAxisLatus rectum
y² = 4axright(a, 0)x = −ay = 04a
y² = −4axleft(−a, 0)x = ay = 04a
x² = 4ayup(0, a)y = −ax = 04a
x² = −4aydown(0, −a)y = ax = 04a

Tangent to x² + y² = a² at (x₁, y₁): xx₁ + yy₁ = a². y = mx + c touches it when c² = a²(1 + m²). Parabola y² = 4ax: focus (a, 0), directrix x = −a, latus rectum 4a.

— Formulas to remember

Key takeaways: the normal to a circle passes through the centre. A line touches a circle when its distance from the centre equals the radius. A conic is fixed by its focus, directrix and eccentricity; e = 1 gives a parabola. Complete the square to bring any parabola to the form with vertex (h, k), then read off the focus and directrix.

Read the full lesson

Lesson 3

The ellipse and the hyperbola: axes, foci, directrices and asymptotes

Ellipse and hyperbola side by side (centre at the origin)

  • Ellipse x²/a² + y²/b² = 1
    • 0 < e < 1
    • c² = a² − b²
    • Vertices (±a, 0), foci (±c, 0)
    • SP + S′P = 2a
    • Closed curve, no asymptotes
  • Hyperbola x²/a² − y²/b² = 1
    • e > 1
    • c² = a² + b²
    • Vertices (±a, 0), foci (±c, 0)
    • |SP − S′P| = 2a
    • Two branches, asymptotes y = ±(b/a)x
In each case a² is under the term of the axis that carries the foci
EquationFocal axisVerticesFocic
(x − h)²/a² + (y − k)²/b² = 1, a > bparallel to x-axis(h ± a, k)(h ± c, k)c² = a² − b²
(x − h)²/b² + (y − k)²/a² = 1, a > bparallel to y-axis(h, k ± a)(h, k ± c)c² = a² − b²
(x − h)²/a² − (y − k)²/b² = 1parallel to x-axis(h ± a, k)(h ± c, k)c² = a² + b²
(y − k)²/a² − (x − h)²/b² = 1parallel to y-axis(h, k ± a)(h, k ± c)c² = a² + b²

Ellipse: b² = a²(1 − e²), SP + S′P = 2a. Hyperbola: b² = a²(e² − 1), |SP − S′P| = 2a, asymptotes y = ±(b/a)x. Both: foci (±ae, 0), directrices x = ±a/e, latus rectum 2b²/a.

— Ellipse and hyperbola

Key takeaways: for an ellipse the bigger denominator marks the major axis and c² = a² − b²; for a hyperbola the positive term marks the transverse axis and c² = a² + b². Complete the squares to find the centre, then shift every point by (h, k).

Read the full lesson

Lesson 4

Conic sections, degenerate forms, identifying a conic and parametric equations

Tilting the cutting plane

  1. Perpendicular to the axis Circle
  2. Tilted, cutting one nape all round Ellipse
  3. Parallel to a generator Parabola
  4. Parallel to the axis, cutting both napes Hyperbola
Standard parametric forms
CurveParametric equationsParameter rangeGeneral point
Circle x² + y² = a²x = a cos θ, y = a sin θ0 ≤ θ ≤ 2π(a cos θ, a sin θ)
Parabola y² = 4axx = at², y = 2at−∞ < t < ∞(at², 2at)
Ellipse x²/a² + y²/b² = 1x = a cos θ, y = b sin θ0 ≤ θ ≤ 2π(a cos θ, b sin θ)
Hyperbola x²/a² − y²/b² = 1x = a sec θ, y = b tan θ−π ≤ θ ≤ π, θ ≠ ±π/2(a sec θ, b tan θ)

Same signs of x² and y² (unequal): ellipse. Opposite signs: hyperbola. Only one square: parabola. Equal coefficients, no xy: circle. Parametric points: (a cos θ, a sin θ), (at², 2at), (a cos θ, b sin θ), (a sec θ, b tan θ).

— Recognising conics

Key takeaways: the tilt of the cutting plane decides the conic, and a plane through the vertex gives a degenerate form. With no xy term, compare the coefficients of x² and y² to identify the conic, but watch for equations that factorise into lines or have no real points. Parametric forms come from cos²θ + sin²θ = 1 and sec²θ − tan²θ = 1.

Read the full lesson

Lesson 5

Tangents and normals to conics and real-life applications

Tangents and normals (the proofs follow the same steps as for the parabola)
CurveTangent at (x₁, y₁)Tangent at θNormal at (x₁, y₁)Normal at θ
Ellipse x²/a² + y²/b² = 1xx₁/a² + yy₁/b² = 1(x cos θ)/a + (y sin θ)/b = 1a²x/x₁ − b²y/y₁ = a² − b²ax/cos θ − by/sin θ = a² − b²
Hyperbola x²/a² − y²/b² = 1xx₁/a² − yy₁/b² = 1(x sec θ)/a − (y tan θ)/b = 1a²x/x₁ + b²y/y₁ = a² + b²ax/sec θ + by/tan θ = a² + b²

Which property does each design use?

  • Parabola
    • Rays parallel to the axis meet at the focus
    • Dish antenna, solar cooker
    • Headlight: bulb at the focus
  • Ellipse
    • Rays from one focus meet at the other
    • Lithotripter
    • Planet orbits with the Sun at a focus
  • Hyperbola
    • |PS − PS′| is constant
    • Locating a ship from two stations
    • Cooling tower outlines

Tangents at (x₁, y₁): yy₁ = 2a(x + x₁); xx₁/a² + yy₁/b² = 1; xx₁/a² − yy₁/b² = 1. Tangency of y = mx + c: c = a/m; c² = a²m² + b²; c² = a²m² − b².

— Tangents to conics

Key takeaways: write the tangent by replacing x² with xx₁ and y² with yy₁; the normal is perpendicular to it through the same point. Use the tangency conditions to find c and the point of contact. In applications, place the curve with its vertex or centre at the origin, write its equation from the given measurements, then substitute.

Read the full lesson

Privacy · Terms · Refunds · Delivery