• Practice
  • About 25 min
  • 5 practice questions

Electrostatic potential, equipotential surfaces and potential energy

Define potential and potential difference, find the potential of a point charge, a group of charges and a dipole, relate E to −dV/dx, and calculate the potential energy of a set of charges and of a dipole in a uniform field.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why a potential energy can be defined for the electrostatic force.
  • Define potential difference and potential (with V = 0 at infinity) and use the volt.
  • Derive V = (1/4πε₀)(q/r) and add the potentials of several charges as scalars.
  • Find the potential of a dipole, V = (1/4πε₀)(p cos θ/r²).
  • Describe equipotential surfaces and use E = −dV/dx.
  • Calculate the potential energy of a system of charges and of a dipole in a uniform field, U = −p⃗·E⃗.

Describing motion with energy is often simpler than working with forces and fields, because energy is a scalar. The Coulomb force, like gravity, is an inverse-square central force and is conservative: the work it does depends only on the start and end points, not on the path. So we can define an electrostatic potential energy, and from it the potential, a scalar that describes the field at every point.

Potential difference and potential

Hold a positive charge q fixed and bring a test charge q′ from a point R to a point P. To move it with constant velocity (no gain in kinetic energy), an external agent must apply a force F⃗_ext = −q′E⃗, equal and opposite to the Coulomb force. The work done is stored as potential energy: ΔU = U_P − U_R = −q′∫E⃗·dr⃗ from R to P. Dividing by q′ removes the test charge: V_P − V_R = −∫E⃗·dr⃗ (from R to P) is the potential difference, the work done by an external force in bringing unit positive charge from R to P. Only differences of potential have physical meaning, so we choose V = 0 at infinity. Then the potential at P is the work done in bringing unit positive charge, with constant velocity, from infinity to P: V_P = −∫E⃗·dr⃗ from ∞ to P. Its unit is J C⁻¹, called the volt (V) after Alessandro Volta. Potential energy and potential are related by ΔU = q′ΔV.

Potential due to a point charge

For a point charge q, E⃗ = (kq/r²) r̂ and dr⃗ = dr r̂, so V = −∫ (kq/r²) dr from ∞ to r = −kq[−1/r] from ∞ to r = kq/r. So V = (1/4πε₀)(q/r). V is positive near a positive charge and decreases with distance; near a negative charge V is negative and rises towards zero as r increases. Just as a mass falls from higher to lower gravitational potential, a free positive charge moves from higher to lower potential, while a free negative charge moves from lower to higher potential. For several charges, the potential is the scalar sum V = (1/4πε₀) Σ qᵢ/rᵢ; no directions are needed, which makes potentials easier to add than fields.

Worked example 1: potential and work

A charge of +6.0 nC is fixed at the origin. (a) Find the potential at A (0.60 m away) and at B (0.30 m away). (b) Find the work needed to move a +2.0 μC charge from A to B. (a) V_A = (9 × 10⁹)(6.0 × 10⁻⁹)/0.60 = 54/0.60 = 90 V; V_B = 54/0.30 = 180 V. (b) W = q(V_B − V_A) = (2.0 × 10⁻⁶)(180 − 90) = 1.8 × 10⁻⁴ J. The work is positive: we must push the positive charge towards the positive source.

Worked example 2: points of zero potential

A charge +q is at the origin and −3q is at x = 8 m. Find the points on the x-axis where V = 0. Between the charges (at distance x from +q): kq/x − 3kq/(8 − x) = 0, so 8 − x = 3x and x = 2 m. To the left of +q (at distance d from it): kq/d − 3kq/(8 + d) = 0, so 8 + d = 3d and d = 4 m, i.e. x = −4 m. Both points are nearer the smaller charge. Note that V = 0 does not mean E = 0 there.

Potential due to an electric dipole

Let P be at distance r from the centre O of a dipole (charges ±q, separation 2a), with OP making angle θ with the dipole axis. If r₁ and r₂ are the distances of P from +q and −q, V = kq(1/r₁ − 1/r₂). By the cosine rule, r₁² = r² + a² − 2ar cos θ and r₂² = r² + a² + 2ar cos θ. For r ≫ a we drop a²/r² and use the binomial approximation: 1/r₁ ≈ (1/r)(1 + (a/r) cos θ) and 1/r₂ ≈ (1/r)(1 − (a/r) cos θ). Subtracting, 1/r₁ − 1/r₂ = 2a cos θ/r², so V = k·2qa cos θ/r², that is V = (1/4πε₀)(p cos θ/r²) = (1/4πε₀)(p⃗·r̂/r²).

  • On the axis, on the +q side (θ = 0°): V = kp/r².
  • On the axis, on the −q side (θ = 180°): V = −kp/r².
  • On the equatorial plane (θ = 90°): V = 0, although the field there is not zero.
  • A dipole's potential falls as 1/r², faster than the 1/r of a single charge.

Equipotential surfaces and the link between E and V

An equipotential surface is a surface on which every point has the same potential. For a point charge the equipotentials are concentric spheres centred on the charge; for a uniform field they are parallel planes perpendicular to the field. Two properties follow: (i) no work is done in moving a charge between two points on the same equipotential, since W = q(V_B − V_A) = 0; (ii) the field is everywhere normal to the equipotential surface, because a component along the surface would do work on a charge moved along it.

Moving unit positive charge a small distance dx against a field E needs work dW = −E dx, and this equals the change in potential dV. So E = −dV/dx: the field is the negative gradient of the potential, pointing from high to low potential. In three dimensions E⃗ = −(∂V/∂x î + ∂V/∂y ĵ + ∂V/∂z k̂). Where V is constant over a region, E = 0 there; where V changes steeply, the field is strong.

Worked example 3: field from potential

In a region the potential depends only on x as V = 4x² + 3 (V in volts, x in metres). Find the field at x = 0.50 m. Step 1: E = −dV/dx = −8x. Step 2: at x = 0.50 m, E = −4.0 V m⁻¹. Answer: 4.0 V m⁻¹ (= 4.0 N C⁻¹) in the −x direction, from higher towards lower potential.

Potential energy of a system of charges

Bring q₂ from infinity to a distance r from q₁. The work done, q₂ × (kq₁/r), is stored as the electrostatic potential energy of the pair: U = (1/4πε₀)(q₁q₂/r). It is the same whichever charge is brought first. To assemble three charges, bring q₁ (no work, nothing else present), then q₂ (work kq₁q₂/r₁₂), then q₃ against the fields of both (work kq₁q₃/r₁₃ + kq₂q₃/r₂₃). The total is U = (1/4πε₀)(q₁q₂/r₁₂ + q₁q₃/r₁₃ + q₂q₃/r₂₃): one term for every pair. Because the force is conservative, the order of assembly does not matter. A positive U means work had to be done to push the charges together; a negative U means the system would hold itself together.

Worked example 4: three charges

Charges +2 μC, −2 μC and +2 μC sit at the corners of an equilateral triangle of side 0.30 m. Find the potential energy of the system. Step 1: the three pairs have products (+2)(−2) = −4, (+2)(+2) = +4 and (−2)(+2) = −4, in units of 10⁻¹² C². Sum = −4 × 10⁻¹² C². Step 2: all distances are 0.30 m, so U = (9 × 10⁹/0.30)(−4 × 10⁻¹²) = (3 × 10¹⁰)(−4 × 10⁻¹²) = −0.12 J.

Potential energy of a dipole in a uniform field

To turn a dipole slowly from angle θ′ to θ against the field's torque, an external torque pE sin θ must be applied. The work is W = ∫pE sin θ dθ = pE(cos θ′ − cos θ), and this equals the change in potential energy. Taking U = 0 at θ′ = 90°, U = −pE cos θ = −p⃗·E⃗. U is least (−pE) when p⃗ is parallel to E⃗ (stable position) and greatest (+pE) when it is antiparallel. The work to turn a dipole from 0° to 180° is 2pE, and from 0° to 90° it is pE.

V = kq/r (scalar, adds directly). Dipole: V = kp cos θ/r². E = −dV/dx. Pair energy U = kq₁q₂/r. Dipole energy U = −pE cos θ.

From field to potential to energy

  1. Electric field E⃗ Force per unit positive charge, a vector.
  2. Potential V Work per unit positive charge from infinity: V = −∫E⃗·dr⃗.
  3. Potential energy U U = qV for a charge placed at that point.
  4. Back to the field E = −dV/dx: the field points down the potential slope.

Key takeaways

  • Potential is work per unit positive charge brought from infinity; potential difference is what matters physically.
  • V = kq/r for a point charge; potentials of several charges add as scalars.
  • Dipole: V = kp cos θ/r²; zero on the equatorial plane.
  • Equipotentials are perpendicular to field lines; no work is done along them; E = −dV/dx.
  • U = Σ kqᵢqⱼ/rᵢⱼ over all pairs; for a dipole U = −p⃗·E⃗.

Check your understanding

  1. 1. Four charges of +1.0 nC each are placed at the corners of a square, each 0.10 m from the centre. The potential and the field magnitude at the centre are:

    1. 0 V and 0
    2. 360 V and 3600 N C⁻¹
    3. 360 V and 0
    4. 90 V and 0
    Show answer

    Answer: C. Potential is a scalar sum: V = 4 × kq/r = 4 × (9 × 10⁹ × 1.0 × 10⁻⁹)/0.10 = 4 × 90 = 360 V. The fields of opposite corners are equal and opposite, so the vector sum of the fields is zero.

  2. 2. A charge of 5 μC is moved 2 cm along an equipotential surface of 100 V. The work done is:

    1. 5 × 10⁻⁴ J
    2. zero
    3. 1 × 10⁻⁵ J
    4. 2.5 × 10⁻⁴ J
    Show answer

    Answer: B. W = q(V_B − V_A). On an equipotential surface V_B = V_A, so W = 0 whatever the distance moved.

  3. 3. In a region V = 6x − 2 (V in volts, x in metres). The electric field is:

    1. 6 V m⁻¹ along +x
    2. −2 V m⁻¹ along x
    3. zero
    4. 6 V m⁻¹ along −x
    Show answer

    Answer: D. E = −dV/dx = −6 V m⁻¹. The negative sign means the field has magnitude 6 V m⁻¹ and points along −x, from higher to lower potential.

  4. 4. A short dipole has p = 2.0 × 10⁻⁹ C m. The potential at a point on its axis 0.30 m from its centre, on the side of the positive charge, is:

    1. 200 V
    2. 600 V
    3. 0 V
    4. 67 V
    Show answer

    Answer: A. On the axis (θ = 0°), V = kp/r² = (9 × 10⁹ × 2.0 × 10⁻⁹)/(0.30)² = 18/0.09 = 200 V.

  5. 5. A dipole in a uniform electric field has the least potential energy when the angle between p⃗ and E⃗ is:

    1. 90°
    2. 180°
    3. 45°
    4. 0°
    Show answer

    Answer: D. U = −pE cos θ. This is smallest (−pE) when cos θ = 1, i.e. θ = 0°, with p⃗ along E⃗. That is the position of stable equilibrium; θ = 180° gives the largest value +pE.

Sign in to keep track of the lessons you finish.

Next lesson → Gauss law, conductors and dielectrics

Privacy · Terms · Refunds · Delivery