- Practice
- About 28 min
- 5 practice questions
Gauss law, conductors and dielectrics
Calculate electric flux, state and apply Gauss law to a wire, a plane sheet, two sheets and a spherical shell, describe conductors in electrostatic equilibrium, shielding and induction, and explain polarisation of dielectrics.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define electric flux Φ = E⃗·A⃗ = EA cos θ and its sign for a closed surface.
- State Gauss law, Φ = Q_encl/ε₀, and explain what it does and does not depend on.
- Use Gauss law to find the field of an infinite line, an infinite sheet, two parallel sheets and a spherical shell.
- List the properties of a conductor in electrostatic equilibrium and explain electrostatic shielding.
- Describe charging by electrostatic induction step by step.
- Distinguish polar and non-polar dielectrics, define polarisation P⃗ = χₑE⃗_ext and dielectric strength.
Coulomb's law with superposition can, in principle, give the field of any charge distribution, but the sums and integrals can be long. When the charges are arranged with spherical, cylindrical or plane symmetry, Gauss law gives the field in a few lines. It also explains why charge sits on the outside of conductors and why the inside of a metal box is safe from electric disturbances.
Electric flux
Electric flux Φ_E measures the number of field lines crossing a surface. It is a scalar, can be positive or negative, and has the unit N m² C⁻¹. For a flat area A in a uniform field: if the area is perpendicular to the field, Φ = EA; if it is parallel to the field, no lines cross and Φ = 0; in general only the component of E normal to the surface counts, so Φ = EA cos θ = E⃗·A⃗, where the area vector A⃗ = A n̂ is perpendicular to the surface and θ is the angle between E⃗ and n̂. For a curved surface in a non-uniform field, divide it into small nearly flat pieces and add: Φ = ∫E⃗·dA⃗. For a closed surface, dA⃗ always points outward, so flux is positive where lines leave and negative where lines enter: Φ = ∮E⃗·dA⃗.
Worked example 1: flux through a rectangle
A rectangle 20 cm × 10 cm lies in a uniform field of 400 N C⁻¹, the field making 60° with the normal to the rectangle. Step 1: A = 0.20 × 0.10 = 0.020 m². Step 2: Φ = EA cos θ = 400 × 0.020 × cos 60° = 8.0 × 0.5 = 4.0 N m² C⁻¹. If the rectangle is turned so that the field is along its normal (θ = 0°), Φ = 8.0 N m² C⁻¹; if the field lies in its plane (θ = 90°), Φ = 0.
Gauss law
Surround a point charge Q by an imaginary sphere of radius r centred on it. The field kQ/r² is the same everywhere on the sphere and points along dA⃗, so Φ = E × 4πr² = (Q/4πε₀r²) × 4πr² = Q/ε₀, whatever the radius. The same total flux passes through any closed surface around the charge, whatever its shape. Gauss law: the total electric flux through any closed surface is Φ = ∮E⃗·dA⃗ = Q_encl/ε₀, where Q_encl is the net charge inside.
- The total flux depends only on the charge enclosed, not on the shape or size of the surface or on where inside it the charge sits.
- Charges outside the surface add nothing to the total flux (their lines enter and leave), although they do affect the field E⃗ at points on the surface.
- The imaginary closed surface is called a Gaussian surface; it is chosen to match the symmetry: a sphere for spherical symmetry, a cylinder for a line or a plane.
- Gauss law is not practical for a dipole, which has none of these symmetries; Coulomb's law is used there instead.
Worked example 2: charges inside and outside
A closed surface encloses +3.0 nC and −1.0 nC, and a charge of +5.0 nC lies just outside it. Step 1: Q_encl = +3.0 − 1.0 = +2.0 nC; the outside charge does not count. Step 2: Φ = Q_encl/ε₀ = (2.0 × 10⁻⁹)/(8.85 × 10⁻¹²) ≈ 226 N m² C⁻¹. If a charge q sits at the centre of a cube, by symmetry each of the six faces carries one sixth of the flux, q/(6ε₀).
Applications of Gauss law
(i) Infinitely long straight wire with charge per unit length λ. By symmetry the field points radially outward (for λ > 0) and has the same size at all points a distance r from the wire. Take a cylinder of radius r and length L around the wire. On the flat ends E⃗ is perpendicular to dA⃗, so they carry no flux; on the curved surface E⃗ is along dA⃗. Gauss law: E × 2πrL = λL/ε₀, so E = λ/(2πε₀r), falling as 1/r rather than 1/r². For a finite wire this holds near its middle, far from the ends.
(ii) Infinite plane sheet with charge per unit area σ. The field is perpendicular to the sheet, pointing away on both sides (σ > 0), with the same size at equal distances. Take a cylinder of length 2r crossing the sheet, with flat ends of area A at P and P′. Only the ends carry flux: EA + EA = σA/ε₀, so E = σ/(2ε₀), independent of the distance from the sheet. For a finite sheet this is true near its middle.
(iii) Two parallel infinite sheets with +σ and −σ. Each gives σ/(2ε₀). Outside the pair the two fields are opposite and cancel, so E = 0 outside. Between the sheets they point the same way, from the positive to the negative sheet, so E = σ/ε₀ inside, uniform everywhere between them. This is the arrangement of a parallel plate capacitor.
(iv) Uniformly charged spherical shell of radius R and charge Q. Use a concentric spherical Gaussian surface of radius r. Outside (r > R): E × 4πr² = Q/ε₀, so E = (1/4πε₀)(Q/r²), as if all the charge were at the centre. On the surface (r = R): E = (1/4πε₀)(Q/R²). Inside (r < R): the Gaussian surface encloses no charge, so E = 0. A graph of E against r is zero up to R, jumps to kQ/R² and then falls as 1/r².
Fields found with Gauss law
-
Infinite line (λ)
- Cylindrical Gaussian surface
- E = λ/(2πε₀r)
- Radial, ∝ 1/r
-
Infinite sheet (σ)
- Cylinder through the sheet
- E = σ/(2ε₀)
- Independent of distance
-
Two sheets (+σ, −σ)
- E = σ/ε₀ between
- E = 0 outside
- Uniform field
-
Spherical shell (Q, R)
- Concentric sphere
- E = kQ/r² outside
- E = 0 inside
Worked example 3: line, sheet and shell
(a) A long wire carries λ = 2.0 μC m⁻¹. At r = 0.10 m, E = λ/(2πε₀r) = 2kλ/r = 2(9 × 10⁹)(2.0 × 10⁻⁶)/0.10 = 3.6 × 10⁴/0.10 = 3.6 × 10⁵ N C⁻¹. (b) A large sheet has σ = 8.85 × 10⁻⁸ C m⁻². E = σ/(2ε₀) = (8.85 × 10⁻⁸)/(2 × 8.85 × 10⁻¹²) = 5.0 × 10³ N C⁻¹ on each side. Two such sheets with +σ and −σ give 1.0 × 10⁴ N C⁻¹ between them and zero outside. (c) A shell of radius 0.10 m carries 5.0 nC. Inside, E = 0. On the surface, E = (9 × 10⁹)(5.0 × 10⁻⁹)/(0.10)² = 45/0.01 = 4.5 × 10³ N C⁻¹. At r = 0.30 m, E = 45/0.09 = 500 N C⁻¹.
Conductors in electrostatic equilibrium
A metal has many free electrons. With no applied field they move randomly with no net drift, and there is no current: the conductor is in electrostatic equilibrium. If an external field is applied, the electrons drift against it, piling up on one face and leaving the other face positive. This separated charge sets up an internal field that grows until it exactly cancels the applied field inside the metal; this happens in about 10⁻¹⁶ s, practically instantly.
- The field inside a conductor is zero, whether it is solid or hollow; otherwise the free charges would keep moving.
- There is no net charge inside; any excess charge resides on the surface. A Gaussian surface drawn just inside the surface has E = 0 on it, so it encloses zero net charge.
- Just outside, the field is perpendicular to the surface and E = σ/ε₀, where σ is the local surface charge density. A component along the surface would move the surface charges. A small Gaussian cylinder half inside the metal gets flux only through its outer face: EA = σA/ε₀.
- The whole conductor is at one potential: charges can move along the surface without work, and since E = 0 inside, the inside has the same potential as the surface.
Electrostatic shielding. Whatever the charges on a conductor and whatever the disturbances outside it, the field inside a cavity in the conductor is zero. Sensitive instruments are protected by placing them in such an enclosure. A Faraday cage made of metal bars demonstrates this: a person inside is unaffected by an artificial lightning discharge outside. For the same reason, during a thunderstorm it is safer to stay inside a bus (with doors and windows shut) than in open ground or under a tree: the metal body carries the charge to the ground around the passengers.
Charging by electrostatic induction
Charging a neutral conducting sphere by induction
- Bring a negative rod near Electrons in the sphere are pushed to the far side; the near side is left positive. Total charge still zero.
- Ground the sphere Repelled electrons flow to the Earth; the positive charge stays, held by the rod's attraction.
- Remove the ground wire The sphere is now short of electrons; the positive charge stays near the rod.
- Take the rod away The positive charge spreads uniformly over the sphere's surface. The sphere is positively charged without being touched.
The charge induced is opposite in sign to the charging rod. For an irregularly shaped conductor the steps are the same, but the final charge is not spread uniformly (see the next lesson).
Dielectrics and polarisation
A dielectric (insulator) such as glass, mica or ebonite has no free electrons; its electrons are bound to atoms. An applied field cannot drive a current, but it rearranges the bound charges. In a non-polar molecule (H₂, O₂, CO₂) the centres of positive and negative charge coincide, so there is no permanent dipole moment; an applied field pulls the centres slightly apart and induces a dipole moment along the field. In a polar molecule (H₂O, N₂O, HCl, NH₃) the centres are separated even without a field, so each molecule is a permanent dipole; thermal motion points them randomly, giving zero net moment, but an applied field partly lines them up. In both cases the dielectric is polarised.
Polarisation P⃗ is the total dipole moment per unit volume. For most (linear, isotropic) dielectrics it is proportional to the applied field: P⃗ = χₑE⃗_ext, where the constant χₑ is the electric susceptibility of the material. A polarised slab between two charged plates behaves like two thin sheets of bound charge (+σ_b on one face, −σ_b on the other). These set up an internal field opposite to the applied field but smaller than it, so the net field inside a dielectric is reduced but, unlike in a conductor, not zero. Polarisation also explains why a balloon rubbed on hair sticks to a wall: it polarises the wall's surface and attracts the opposite charges it induces.
Dielectric strength. In a very strong field the bound charges are torn free and the dielectric starts to conduct: dielectric breakdown. The largest field a dielectric can withstand without breaking down is its dielectric strength. For air it is about 3 × 10⁶ V m⁻¹; above this a spark jumps through the air.
| Substance | Dielectric strength (V m⁻¹) |
|---|---|
| Mica | 100 × 10⁶ |
| Teflon | 60 × 10⁶ |
| Paper | 16 × 10⁶ |
| Pyrex glass | 14 × 10⁶ |
| Air | 3 × 10⁶ |
Gauss law: ∮E⃗·dA⃗ = Q_encl/ε₀. Line: λ/(2πε₀r). Sheet: σ/(2ε₀). Between two sheets: σ/ε₀. Shell: kQ/r² outside, 0 inside. Conductor: E = 0 inside, σ/ε₀ just outside.
Key takeaways
- Flux Φ = E⃗·A⃗; through a closed surface it equals Q_encl/ε₀ (Gauss law).
- Choose a Gaussian surface that matches the symmetry so that E is constant and can be taken out of the integral.
- Inside a conductor E = 0 and any excess charge is on the surface; the conductor is an equipotential; cavities are shielded.
- Induction charges a conductor with the opposite sign without contact.
- A dielectric is polarised by a field; its internal field reduces, but does not cancel, the applied field.
Check your understanding
-
1. A closed surface completely surrounds an electric dipole (charges +q and −q). The total electric flux through the surface is:
- q/ε₀
- 2q/ε₀
- zero
- −q/ε₀
Show answer
Answer: C. Gauss law counts only the net enclosed charge: +q + (−q) = 0. So the total flux is zero, even though the field on the surface is not zero.
-
2. A point charge q is placed at the centre of a cube. The electric flux through one face of the cube is:
- q/ε₀
- q/(6ε₀)
- q/(8ε₀)
- 6q/ε₀
Show answer
Answer: B. The total flux through the closed cube is q/ε₀. With the charge at the centre all six faces are alike, so each face carries one sixth: q/(6ε₀).
-
3. The field of a long uniformly charged wire is 6.0 × 10⁴ N C⁻¹ at 2.0 cm from it. At 6.0 cm from the wire it is:
- 6.7 × 10³ N C⁻¹
- 1.8 × 10⁵ N C⁻¹
- 6.0 × 10⁴ N C⁻¹
- 2.0 × 10⁴ N C⁻¹
Show answer
Answer: D. For a line charge E = λ/(2πε₀r) ∝ 1/r. Tripling the distance divides the field by 3: 6.0 × 10⁴/3 = 2.0 × 10⁴ N C⁻¹. (1/r², which would give 6.7 × 10³, is for a point charge.)
-
4. During a thunderstorm a person sitting inside a closed bus is safer than one standing in an open field because:
- the electric field inside a closed metal body is zero (electrostatic shielding)
- rubber tyres always stop lightning
- the bus is at a higher potential than the ground
- the bus attracts no charge
Show answer
Answer: A. The metal body acts like a Faraday cage: the field inside a closed conducting shell is zero, and any discharge passes through the metal body to the ground around the passengers. It is the metal shell, not the tyres, that protects them.
-
5. Which of these molecules is non-polar (no permanent dipole moment)?
- H₂O
- HCl
- CO₂
- NH₃
Show answer
Answer: C. In CO₂ the centres of positive and negative charge coincide, so it has no permanent dipole moment; it is non-polar like H₂ and O₂. H₂O, HCl and NH₃ are polar molecules.
Sign in to keep track of the lessons you finish.