- Practice
- About 22 min
- 5 practice questions
Displacement current and Maxwell's correction to Ampere's law
See why a changing electric field must produce a magnetic field, find the flaw in Ampere's law for a charging capacitor, and use the displacement current i_d = ε₀ dΦ_E/dt in the Ampere-Maxwell law.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write Faraday's law in field form, ∮E·dl = −dΦ_B/dt, and Maxwell's law of induction, ∮B·dl = μ₀ε₀ dΦ_E/dt.
- Explain the inconsistency in Ampere's circuital law for a charging capacitor.
- Define displacement current and show that between the plates it equals the conduction current in the wires.
- Write the Ampere-Maxwell law and calculate displacement currents.
- Explain why Maxwell's correction makes electromagnetic waves possible.
Light from the Sun, the signal reaching a mobile phone, the X-ray that shows a fractured bone and the microwaves in an oven are all electromagnetic waves. For a long time optics and electromagnetism were thought to be separate subjects. James Clerk Maxwell joined them: his theory predicted that light is an electromagnetic wave travelling at 3 × 10⁸ m s⁻¹ in free space. The key step was a single correction to Ampere's law, and this lesson builds it.
Symmetry between electric and magnetic fields
In Unit 4 you met Faraday's law: a changing magnetic flux produces an electric field. Written in terms of fields, ∮E·dl = −dΦ_B/dt = −(d/dt)∫B·dA. The left side is the electric field induced round a closed loop; the right side is the rate of change of the magnetic flux through the region the loop encloses. Maxwell, believing that nature is symmetric, asked the reverse question: if a changing magnetic field produces an electric field, should a changing electric field not produce a magnetic field? He showed that it does: ∮B·dl = μ₀ε₀ dΦ_E/dt, where Φ_E = ∫E·dA is the electric flux. This is Maxwell's law of induction. This mutual production of fields explains radio waves, infrared rays, gamma rays and the rest of the family.
The problem with Ampere's law
Ampere's circuital law says ∮B·dl = μ₀ i_enclosed, the current passing through any surface bounded by the loop. Consider a parallel plate capacitor (non-conducting medium between the plates) being charged by a time-varying conduction current i_c. Draw a circular Amperian loop round the wire near point P, just outside the capacitor.
- Take a flat surface S₁ bounded by the loop: the wire pierces it, so ∮B·dl = μ₀ i_c, and there is a field at P.
- Now take a balloon-shaped surface S₂ with the same rim, bulging out so that it passes between the plates. No wire crosses it and no charge flows across the gap, so ∮B·dl = 0.
- The same loop gives two different answers, though Ampere's law should not depend on the shape of the surface chosen. The law is incomplete.
Displacement current
Maxwell's resolution: while the capacitor charges, the electric field between the plates is changing, and a changing electric flux behaves like a current. He called it the displacement current. By Gauss's law the flux between the plates is Φ_E = EA = q/ε₀ (A is the plate area, q the charge). Differentiating, dΦ_E/dt = (1/ε₀) dq/dt, so ε₀ dΦ_E/dt = dq/dt = i_c. Define i_d = ε₀ dΦ_E/dt. Between the plates the conduction current is zero but i_d is exactly equal to the conduction current in the wires, so current is continuous all round the circuit.
Current through a charging capacitor
- Wire Conduction current i_c carries charge to the plate.
- Plates charge up q rises, so the field E = q/ε₀A between the plates rises.
- Gap No charge crosses, but the changing flux gives i_d = ε₀ dΦ_E/dt = i_c.
- Wire on the other side Conduction current i_c continues; the field B circles both wire and gap.
Maxwell then modified Ampere's law to include both kinds of current:
Ampere-Maxwell law: ∮B·dl = μ₀(i_c + i_d) = μ₀i_c + μ₀ε₀ dΦ_E/dt, with displacement current i_d = ε₀ dΦ_E/dt.
With this, surface S₂ also gives μ₀i_c, and the contradiction disappears. The time-varying electric field between the plates produces a magnetic field there too, circling perpendicular to E. When the current in a circuit is constant, nothing is changing and the displacement current is zero. A note from the textbook: the name 'displacement' stuck because Maxwell chose it, though nothing is actually displaced.
Worked example 1: rate of change of electric flux
A capacitor is being charged by a steady conduction current of 2.0 A. Find the displacement current in the gap and the rate of change of electric flux between the plates. Step 1: i_d = i_c = 2.0 A. Step 2: dΦ_E/dt = i_d/ε₀ = 2.0/(8.85 × 10⁻¹² C² N⁻¹ m⁻²) = 2.26 × 10¹¹ V m s⁻¹ (equivalently N m² C⁻¹ s⁻¹).
Worked example 2: displacement current from a changing voltage
A parallel plate capacitor has plates of area 0.010 m², 2.0 mm apart, and the voltage across it rises at 5.0 × 10⁶ V s⁻¹. Step 1: E = V/d, so Φ_E = EA = VA/d and i_d = ε₀ dΦ_E/dt = (ε₀A/d) dV/dt. Step 2: ε₀A/d = 8.85 × 10⁻¹² × 0.010/(2.0 × 10⁻³) = 8.85 × 10⁻¹² × 5 = 4.43 × 10⁻¹¹ F (the capacitance). Step 3: i_d = 4.43 × 10⁻¹¹ × 5.0 × 10⁶ = 2.2 × 10⁻⁴ A = 0.22 mA.
Worked example 3: AC across a capacitor
An AC voltage V = V_m sin ωt with V_m = 100 V and f = 1.0 kHz is applied to a capacitor with plates of area 50 cm² and separation 0.50 mm. Find the peak displacement current. Step 1: C = ε₀A/d = 8.85 × 10⁻¹² × 5.0 × 10⁻³/(5.0 × 10⁻⁴) = 8.85 × 10⁻¹¹ F. Step 2: i_d = C dV/dt = CV_mω cos ωt, so the peak is CV_mω. Step 3: ω = 2π × 1000 = 6283 rad s⁻¹; peak i_d = 8.85 × 10⁻¹¹ × 100 × 6283 = 5.6 × 10⁻⁵ A = 56 μA.
Why the correction matters
Earth receives radiation from the Sun and stars across empty space, where there are no charges and no conduction currents. If only conduction currents could produce magnetic fields, such radiation could not exist. In empty space the Ampere-Maxwell law becomes ∮B·dl = μ₀ε₀ dΦ_E/dt. In a star, thermally excited atoms produce a changing electric field; this produces a changing magnetic field; by Faraday's law that produces a changing electric field again, and so on. These coupled fields travel through empty space at the speed of light: an electromagnetic wave. A correction Maxwell began from symmetry turned out to explain how light itself exists.
Key takeaways
- Changing magnetic flux induces an electric field (Faraday); changing electric flux induces a magnetic field (Maxwell).
- Ampere's law alone gives contradictory results for a charging capacitor.
- Displacement current i_d = ε₀ dΦ_E/dt exists wherever the electric flux changes; in a capacitor gap it equals the conduction current.
- Ampere-Maxwell law: ∮B·dl = μ₀i_c + μ₀ε₀ dΦ_E/dt; for a constant current i_d = 0.
- The correction explains how electromagnetic waves cross empty space.
Check your understanding
-
1. Maxwell's law of induction states that:
- a changing magnetic flux induces an electric field
- a steady current produces a steady magnetic field
- a changing electric flux induces a magnetic field
- a stationary charge produces a magnetic field
Show answer
Answer: C. ∮B·dl = μ₀ε₀ dΦ_E/dt: a time-varying electric flux induces a magnetic field round a loop. 'A changing magnetic flux induces an electric field' is Faraday's law; a stationary charge produces only an electric field.
-
2. The displacement current is given by:
- ε₀ dΦ_E/dt
- μ₀ dΦ_E/dt
- ε₀ dΦ_B/dt
- dΦ_E/dt divided by ε₀
Show answer
Answer: A. i_d = ε₀ dΦ_E/dt. Check with a capacitor: Φ_E = q/ε₀, so ε₀ dΦ_E/dt = dq/dt, which is a current.
-
3. A capacitor is charged by a constant current of 0.5 A. The displacement current between its plates is:
- zero, as no charge crosses the gap
- 0.25 A
- 1.0 A
- 0.5 A
Show answer
Answer: D. Between the plates i_d = ε₀ dΦ_E/dt = dq/dt, the same as the conduction current in the leads: 0.5 A.
-
4. In a long straight wire carrying a constant direct current, the displacement current is:
- equal to the conduction current
- zero
- infinite
- half the conduction current
Show answer
Answer: B. A constant current gives a steady electric field, so dΦ_E/dt = 0 and the displacement current is zero.
-
5. A displacement current of 8.85 μA flows in a region. The rate of change of electric flux there is (ε₀ = 8.85 × 10⁻¹² C² N⁻¹ m⁻²):
- 10⁻⁶ V m s⁻¹
- 10³ V m s⁻¹
- 10⁶ V m s⁻¹
- 10¹² V m s⁻¹
Show answer
Answer: C. dΦ_E/dt = i_d/ε₀ = 8.85 × 10⁻⁶/8.85 × 10⁻¹² = 10⁶ V m s⁻¹.
Sign in to keep track of the lessons you finish.