• Practice
  • About 30 min
  • 15 practice questions

Final self-assessment: Electromagnetic waves

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions before reading the explanations. Take c = 3 × 10⁸ m s⁻¹, ε₀ = 8.85 × 10⁻¹² C² N⁻¹ m⁻² and μ₀ = 4π × 10⁻⁷ T m A⁻¹ where needed. These are harder than the lesson checks.

Final self-assessment

  1. 1. A parallel plate capacitor has plates of area 0.02 m², 1 mm apart, and the voltage across it changes at 10⁶ V s⁻¹. The displacement current between the plates is:

    1. 177 μA
    2. 17.7 μA
    3. 1.77 mA
    4. 8.85 μA
    Show answer

    Answer: A. i_d = (ε₀A/d) dV/dt = (8.85 × 10⁻¹² × 0.02/10⁻³) × 10⁶ = 1.77 × 10⁻¹⁰ × 10⁶ = 1.77 × 10⁻⁴ A = 177 μA.

  2. 2. Maxwell needed to correct Ampere's circuital law because, for a charging capacitor:

    1. the conduction current in the wires is zero
    2. the magnetic field inside the plates is infinite
    3. the same loop gave different results for a flat surface and a surface passing between the plates
    4. Faraday's law failed between the plates
    Show answer

    Answer: C. A flat surface pierced by the wire gives μ₀i_c, while a balloon surface passing through the gap is crossed by no conduction current and gives zero. Adding the displacement current removes the contradiction.

  3. 3. While a capacitor is being charged, between its plates:

    1. both conduction and displacement currents are zero
    2. the conduction current is zero and the displacement current equals the current in the leads
    3. the conduction current equals the current in the leads
    4. the displacement current is twice the current in the leads
    Show answer

    Answer: B. No charge crosses the dielectric, so there is no conduction current there, but the changing flux gives i_d = ε₀ dΦ_E/dt = dq/dt, equal to the current in the leads.

  4. 4. Which of Maxwell's equations tells us that magnetic field lines always form closed loops?

    1. ∮E·dl = −dΦ_B/dt
    2. ∮E·dA = Q/ε₀
    3. ∮B·dl = μ₀i_c + μ₀ε₀ dΦ_E/dt
    4. ∮B·dA = 0
    Show answer

    Answer: D. Gauss's law for magnetism: zero net magnetic flux through every closed surface, so no field line starts or ends anywhere: the lines are closed loops and there are no monopoles.

  5. 5. A closed surface encloses an electric dipole (charges +q and −q). The net electric flux through the surface is:

    1. zero
    2. q/ε₀
    3. 2q/ε₀
    4. −q/ε₀
    Show answer

    Answer: A. Q_enclosed = +q − q = 0, so by Gauss's law ∮E·dA = 0, even though the field is not zero on the surface.

  6. 6. In a region with no conduction current, the electric flux through a loop changes at 1.0 × 10¹² V m s⁻¹. The value of ∮B·dl round the loop is about:

    1. 8.85 T m
    2. 1.26 × 10⁶ T m
    3. 1.1 × 10⁻⁵ T m
    4. zero
    Show answer

    Answer: C. ∮B·dl = μ₀ε₀ dΦ_E/dt = (4π × 10⁻⁷ × 8.85 × 10⁻¹²) × 10¹² = 1.11 × 10⁻¹⁷ × 10¹² = 1.1 × 10⁻⁵ T m. It is not zero, because the displacement current produces a field.

  7. 7. Light of frequency 6 × 10¹⁴ Hz enters a non-magnetic medium of dielectric constant 4. Its wavelength in the medium is:

    1. 500 nm
    2. 1000 nm
    3. 125 nm
    4. 250 nm
    Show answer

    Answer: D. n = √(ε_r μ_r) = √4 = 2, so v = 1.5 × 10⁸ m s⁻¹. The frequency is unchanged, so λ = v/f = 1.5 × 10⁸/6 × 10¹⁴ = 2.5 × 10⁻⁷ m = 250 nm (500 nm is the vacuum wavelength).

  8. 8. Electromagnetic radiation carrying 9 J of energy falls on a perfectly reflecting surface. The momentum delivered to the surface is:

    1. 3 × 10⁻⁸ kg m s⁻¹
    2. 6 × 10⁻⁸ kg m s⁻¹
    3. 2.7 × 10⁹ kg m s⁻¹
    4. zero, since the light bounces off
    Show answer

    Answer: B. On reflection the momentum changes from +U/c to −U/c, so Δp = 2U/c = 2 × 9/(3 × 10⁸) = 6 × 10⁻⁸ kg m s⁻¹.

  9. 9. An LC oscillator with L = 2 μH and C = 50 pF radiates electromagnetic waves. Their wavelength is about:

    1. 18.8 m
    2. 1.88 m
    3. 188 m
    4. 6.0 m
    Show answer

    Answer: A. √(LC) = √(10⁻¹⁶) = 10⁻⁸ s; f = 1/(2π × 10⁻⁸) = 1.59 × 10⁷ Hz; λ = c/f = 3 × 10⁸/1.59 × 10⁷ = 18.8 m.

  10. 10. The electric field amplitude of an electromagnetic wave in vacuum is 300 V m⁻¹. The magnetic field amplitude is:

    1. 9 × 10¹⁰ T
    2. 1 × 10⁻⁸ T
    3. 1 × 10⁻⁶ T
    4. 3 × 10⁻⁶ T
    Show answer

    Answer: C. B₀ = E₀/c = 300/(3 × 10⁸) = 1 × 10⁻⁶ T.

  11. 11. In vacuum, the electric field of a wave is E = E₀ sin(kz − ωt) with k = 2.0 × 10⁷ m⁻¹. The wave belongs to the region of:

    1. infrared
    2. ultraviolet
    3. visible light
    4. X-rays
    Show answer

    Answer: B. λ = 2π/k = 3.14 × 10⁻⁷ m = 314 nm; f = c/λ = 9.5 × 10¹⁴ Hz, above the visible limit of 8 × 10¹⁴ Hz and well below 10¹⁷ Hz: ultraviolet.

  12. 12. Which list is in order of increasing frequency?

    1. X-rays, ultraviolet, visible, infrared
    2. microwaves, radio waves, infrared, visible
    3. visible, infrared, ultraviolet, gamma rays
    4. infrared, visible, ultraviolet, X-rays
    Show answer

    Answer: D. From low to high frequency the order is radio, microwave, infrared, visible, ultraviolet, X-rays, gamma rays. Only 'infrared, visible, ultraviolet, X-rays' keeps that order.

  13. 13. Which pairing of radiation and use is WRONG?

    1. Infrared: night vision photography
    2. Ultraviolet: sterilising surgical instruments
    3. Microwaves: detecting fractures in bones
    4. Gamma rays: radiotherapy for cancer
    Show answer

    Answer: C. Fractures are detected with X-rays. Microwaves are used for RADAR, ovens and satellite links. The other pairings are correct.

  14. 14. In a microwave oven of frequency 2450 MHz, scorched spots on a stationary chapati are 6.1 cm apart (adjacent antinodes). The speed of light found from this is about:

    1. 3.0 × 10⁸ m s⁻¹
    2. 1.5 × 10⁸ m s⁻¹
    3. 6.0 × 10⁸ m s⁻¹
    4. 1.5 × 10⁶ m s⁻¹
    Show answer

    Answer: A. Adjacent antinodes are λ/2 apart, so λ = 12.2 cm = 0.122 m. c = fλ = 2.45 × 10⁹ × 0.122 = 2.99 × 10⁸ m s⁻¹. Using 6.1 cm as the full wavelength gives the wrong 1.5 × 10⁸.

  15. 15. Comparing the Fraunhofer lines with absorption spectra measured in the laboratory allows scientists to:

    1. measure the distance to the Sun
    2. identify the elements in the Sun's atmosphere
    3. find the age of the Sun
    4. show that sunlight is longitudinal
    Show answer

    Answer: B. Each element absorbs its own characteristic wavelengths. Matching the dark lines in sunlight with laboratory absorption lines reveals which elements are present in the Sun's outer atmosphere.

Questions 1-3: lesson 1 (displacement current). Questions 4-6: lesson 2 (Maxwell's equations). Questions 7-9: lesson 3 (Hertz's experiment and properties of waves). Questions 10-13: lesson 4 (sources and the electromagnetic spectrum). Questions 14-15: lessons 4 and 5 (measuring c, types of spectrum and Fraunhofer lines).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery