- Practice
- About 20 min
- 5 practice questions
Maxwell's equations in integral form
State the four Maxwell's equations in integral form (Gauss's laws for electricity and magnetism, Faraday's law, Ampere-Maxwell law), explain what each says about fields, and apply them to simple numbers.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write the four Maxwell's equations in integral form.
- Explain what each equation says about field lines, charges and currents.
- Explain why Gauss's law for magnetism means there are no isolated magnetic poles.
- Use each equation in a simple calculation.
Newton's laws summarise mechanics. In the same way, four equations, Maxwell's equations, summarise electrodynamics: they describe the behaviour of charges and currents and the properties of electric and magnetic fields completely. They can be written in integral form or differential form; the differential form is beyond the higher secondary level, so the Tamil Nadu textbook uses the integral form only.
First equation: Gauss's law for electricity
∮ E·dA = Q_enclosed/ε₀. The net electric flux through any closed surface equals the net charge inside divided by ε₀. It holds for point charges and for continuous charge distributions. It also tells us that electric field lines start on positive charges and end on negative charges, so they do not form closed loops: an isolated positive or negative charge can exist.
Second equation: Gauss's law for magnetism
∮ B·dA = 0. The total magnetic flux through any closed surface is zero: as many field lines leave as enter. So magnetic field lines are continuous closed loops, and no isolated magnetic pole (monopole) exists. Breaking a magnet always gives smaller magnets, each with two poles.
Third equation: Faraday's law
∮ E·dl = −dΦ_B/dt. The line integral of the electric field round any closed path (the induced emf) equals the negative rate of change of the magnetic flux through the surface bounded by that path. Generators and transformers, and so much of modern technology, rest on this equation.
Fourth equation: Ampere-Maxwell law
∮ B·dl = μ₀i_c + μ₀ε₀ (d/dt)∮E·dA. The magnetic field round a closed path is produced by the conduction current and by the displacement current through it. Its second term is what allows electromagnetic waves, on which all wireless communication depends; our knowledge of stars, planets and galaxies comes from analysing the electromagnetic waves they emit.
| Equation | Name | What it tells us |
|---|---|---|
| ∮E·dA = Q_enclosed/ε₀ | Gauss's law for electricity | Charges are sources of E; E lines begin and end on charges; isolated charges exist |
| ∮B·dA = 0 | Gauss's law for magnetism | B lines form closed loops; no magnetic monopole |
| ∮E·dl = −dΦ_B/dt | Faraday's law | A changing magnetic flux induces an electric field (emf) |
| ∮B·dl = μ₀i_c + μ₀ε₀ dΦ_E/dt | Ampere-Maxwell law | Conduction and displacement currents both produce B |
How the four equations are grouped
-
Flux through closed surfaces
- Gauss (electricity): flux of E = Q/ε₀
- Gauss (magnetism): flux of B = 0
-
Fields round closed loops
- Faraday: changing B gives circulating E
- Ampere-Maxwell: current or changing E gives circulating B
Worked example 1: Gauss's law for electricity
A closed surface encloses charges of +12 nC and −3.15 nC. Find the net electric flux through it. Step 1: Q_enclosed = 12 − 3.15 = 8.85 nC = 8.85 × 10⁻⁹ C. Step 2: Φ_E = Q/ε₀ = 8.85 × 10⁻⁹/8.85 × 10⁻¹² = 1.0 × 10³ N m² C⁻¹. Charges outside the surface make no contribution to the net flux.
Worked example 2: Gauss's law for magnetism
A closed box is placed so that 3.0 mWb of magnetic flux enters it through one face. How much flux leaves through the other faces? Since ∮B·dA = 0, the flux leaving must also be 3.0 mWb. (Taking outward flux as positive: −3.0 + 3.0 = 0.) The same would be true however the box is placed.
Worked example 3: Faraday's law
The magnetic flux through a circular path is increasing at 0.020 Wb s⁻¹. Then ∮E·dl = −0.020 V: an emf of 20 mV is induced round the path, whether or not a wire is present. If the path is a circle of radius 0.10 m and E has the same size everywhere on it, E × 2πr = 0.020, so E = 0.020/(2 × 3.1416 × 0.10) = 0.032 V m⁻¹.
Worked example 4: Ampere-Maxwell law in empty space
In a region with no conduction current, the electric flux through a loop changes at 1.0 × 10¹² V m s⁻¹. Step 1: μ₀ε₀ = 4π × 10⁻⁷ × 8.854 × 10⁻¹² = 1.113 × 10⁻¹⁷ s² m⁻². Step 2: ∮B·dl = μ₀ε₀ dΦ_E/dt = 1.113 × 10⁻¹⁷ × 1.0 × 10¹² = 1.1 × 10⁻⁵ T m. A magnetic field circles the loop although no charge moves through it.
∮E·dA = Q/ε₀; ∮B·dA = 0; ∮E·dl = −dΦ_B/dt; ∮B·dl = μ₀i_c + μ₀ε₀ dΦ_E/dt.
Key takeaways
- Gauss's law for electricity: electric flux through a closed surface = Q_enclosed/ε₀; isolated charges exist.
- Gauss's law for magnetism: magnetic flux through a closed surface is zero; no monopoles.
- Faraday's law: changing magnetic flux induces a circulating electric field.
- Ampere-Maxwell law: conduction current and changing electric flux both induce a circulating magnetic field.
- Together the last two make self-sustaining electromagnetic waves possible.
Check your understanding
-
1. The equation ∮B·dA = 0 means that:
- isolated magnetic poles do not exist
- magnetic fields cannot exist inside a closed surface
- the magnetic field is zero everywhere
- electric charges cannot exist
Show answer
Answer: A. Zero net magnetic flux through every closed surface means field lines that enter also leave: they form closed loops, with no isolated north or south pole to start or end on.
-
2. Which of Maxwell's equations states that a changing magnetic flux produces an electric field?
- Gauss's law for electricity
- Gauss's law for magnetism
- Ampere-Maxwell law
- Faraday's law
Show answer
Answer: D. ∮E·dl = −dΦ_B/dt is Faraday's law: the circulating electric field (emf) is set by the rate of change of magnetic flux.
-
3. A closed surface encloses charges of +5 nC and −2 nC. The net electric flux through it is about (ε₀ = 8.85 × 10⁻¹² C² N⁻¹ m⁻²):
- 791 N m² C⁻¹
- 339 N m² C⁻¹
- 565 N m² C⁻¹
- zero
Show answer
Answer: B. Q_enclosed = 5 − 2 = 3 nC. Φ_E = 3 × 10⁻⁹/8.85 × 10⁻¹² = 339 N m² C⁻¹. (Adding the charges as 7 nC gives the wrong 791.)
-
4. The displacement current term appears in:
- Gauss's law for electricity
- Faraday's law
- the Ampere-Maxwell law
- Gauss's law for magnetism
Show answer
Answer: C. The term μ₀ε₀ dΦ_E/dt, Maxwell's correction, is in the Ampere-Maxwell law, ∮B·dl = μ₀i_c + μ₀ε₀ dΦ_E/dt.
-
5. That electric field lines begin on positive charges and end on negative charges follows from:
- Gauss's law for electricity
- Gauss's law for magnetism
- Faraday's law
- the Ampere-Maxwell law
Show answer
Answer: A. ∮E·dA = Q_enclosed/ε₀: a non-zero flux through a closed surface needs charge inside, so the charges are where field lines start and end.
Sign in to keep track of the lessons you finish.