• Practice
  • About 15 min
  • 5 practice questions

Direction, the grid system and map projections

Read cardinal directions on a map, locate places using latitude and longitude in degrees and minutes, and explain map projections and the three main kinds: cylindrical, conical and planar.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Identify cardinal and intermediate directions on a map.
  • Locate a place using latitude and longitude, written in degrees and minutes.
  • Explain what a map projection is and name its three main kinds.

Knowing how far is not enough: you also need to know which way and exactly where. Direction and the grid of latitudes and longitudes answer those questions, and projections explain how a round Earth is drawn on flat paper.

Direction

Maps are normally drawn with north at the top, pointing towards the North Pole. Facing north, east is on your right, west on your left and south behind you. These four are the cardinal directions; between them lie the intermediate directions north-east, south-east, south-west and north-west. Direction is usually shown by a north-south line with an arrowhead pointing north. A memory aid: 'Never Eat Soggy Wheat' gives North, East, South, West going clockwise.

Cardinal directions, clockwise from north

  1. North
  2. East
  3. South
  4. West

Then back to step 1: North

The grid system

The exact position of a place is given by its latitude (distance north or south of the Equator) and longitude (distance east or west of the Prime Meridian). By custom, latitude is stated first, then longitude. Both are measured in degrees (°), minutes (′) and seconds (″): 1 degree = 60 minutes and 1 minute = 60 seconds. The lines form a grid over the map, so any place can be pinpointed where its latitude and longitude lines cross.

For example, the mainland of India extends from 8°4′ N to 37°6′ N latitude and from 68°7′ E to 97°25′ E longitude.

Map projections

The Earth is round (its true shape, slightly flattened at the poles, is called the geoid), but a map is flat. A map projection is a way of transferring the network of latitudes and longitudes from the globe onto a flat surface. Imagine a transparent globe with a bulb inside: wrap paper around it and the lines would be 'projected' onto the paper. No flat map can keep everything correct, so each projection is designed to preserve shape, area or direction as best it can.

Three main kinds of projection

  • Cylindrical Paper wrapped as a cylinder
    • Good near the Equator
    • e.g. Mercator projection
    • High latitudes look too large
  • Conical Paper shaped as a cone
    • Good for middle latitudes
    • e.g. perspective conic
  • Planar (zenithal or azimuthal) Flat paper touching one point
    • Good for polar regions
    • e.g. orthographic
    • Used on the United Nations flag

The United Nations flag shows an azimuthal (polar) projection centred on the North Pole; it ends at 60° S, so Antarctica does not appear.

Latitude first, then longitude; 1° = 60′, 1′ = 60″. Projections: cylindrical, conical, planar. No flat map is perfect.

Worked example 1: Extent of India in degrees

How many degrees of latitude does mainland India cover? Step 1: 37°6′ − 8°4′ = 29°2′. Step 2: 2′ is a small fraction of a degree (2 ÷ 60 ≈ 0.03°). Answer: about 29 degrees. For longitude: 97°25′ − 68°7′ = 29°18′, also about 29 degrees. So mainland India spans roughly the same number of degrees east-west as north-south.

Worked example 2: Reading directions

Standing in India and facing north, in which direction is Sri Lanka, and in which is Afghanistan? Step 1: on a map, Sri Lanka lies below (south of) the tip of India. Step 2: Afghanistan lies above and to the left of India. Answer: Sri Lanka is to the south, and Afghanistan to the north-west.

Key takeaways: Maps usually have north at the top; the cardinal directions are north, east, south and west. Latitude and longitude form a grid and are written latitude first, in degrees and minutes. A projection transfers the globe's grid to a flat surface and keeps some of shape, area or direction; the main kinds are cylindrical, conical and planar.

Check your understanding

  1. 1. If you face north, east is on your:

    1. Left
    2. Right
    3. Back
    4. Front
    Show answer

    Answer: B. Facing north, east is on the right, west on the left and south behind you.

  2. 2. When writing a place's location, which is normally stated first?

    1. Latitude
    2. Longitude
    3. Altitude
    4. Scale
    Show answer

    Answer: A. By convention latitude is given first, then longitude.

  3. 3. How many minutes make one degree?

    1. 100
    2. 24
    3. 360
    4. 60
    Show answer

    Answer: D. One degree is divided into 60 minutes, and one minute into 60 seconds.

  4. 4. The transformation of the globe's network of latitudes and longitudes onto a flat surface is a:

    1. Legend
    2. Grid reference
    3. Map projection
    4. Survey
    Show answer

    Answer: C. A map projection shows the spherical grid on a plane surface.

  5. 5. Which projection appears on the United Nations flag?

    1. Azimuthal (polar) projection
    2. Mercator projection
    3. Conical projection
    4. No projection
    Show answer

    Answer: A. The UN flag shows the world in an azimuthal projection centred on the North Pole.

Privacy · Terms · Refunds · Delivery