- Practice
- About 15 min
- 5 practice questions
GNSS, GPS, GIS and Bhuvan
Explain how a Global Navigation Satellite System works and name the major systems including India's NavIC, describe GPS and its uses, and explain GIS layers and India's Bhuvan portal.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain how a GNSS works through its space, control and user segments, and name the major systems.
- Describe GPS and its uses.
- Explain what a GIS is and how its layers work, and describe Bhuvan.
When you book a cab on a phone and watch the car move on the map, several technologies are working together: satellites that give position, and computer maps that show it. This lesson explains these modern mapping tools.
Global Navigation Satellite System (GNSS)
A GNSS is a system of satellites that, together with a small electronic receiver, can locate, monitor and track a user anywhere in the world. It is used to track vehicles, ships and aircraft, and can raise alerts when a vehicle speeds or leaves a set area. It has three parts:
Three segments of a GNSS
- Space segment: a group of satellites sends signals
- Control segment: ground stations monitor and correct the satellites
- User segment: a receiver turns the signals into location, speed and time
| Country or region | System |
|---|---|
| USA | NAVSTAR Global Positioning System (GPS) |
| Russia | GLONASS |
| Europe | Galileo |
| China | BeiDou |
| India | IRNSS, called NavIC |
Global Positioning System (GPS)
GPS is the American GNSS, created by the U.S. Department of Defense; it was the world's first and is still the most widely used. It became fully operational in 1995. Its basic constellation is 24 satellites in six orbits about 20,000 km above the Earth, each circling the planet twice a day, so that several satellites are always in view from anywhere. GPS receivers are built into phones, watches, cars, ships and aircraft.
- Accurate transport data: distance, route and direction.
- Search and rescue, and faster emergency services and disaster relief.
- Military uses.
- Weather forecasting, earthquake monitoring and environmental protection.
- A reliable guide for tourists.
Geographic Information System (GIS)
A GIS is a computer-based tool for storing, managing and showing large amounts of data about a geographic area, collected through remote sensing, GPS and other sources. It combines computer hardware, software, geographic data and trained people. Its key ingredient is location: every piece of data is linked to a coordinate, an address or a distance from a known point. Each type of data - hospitals, schools, water bodies, parks, ATMs - is stored as a separate layer, and layers can be switched on or off and combined to make new maps. According to the textbook, GIS was first recognised in the late 1950s through the work of Waldo Tobler and Roger Tomlinson. Online maps such as Google Maps and Google Earth are familiar examples of GIS ideas in use.
GIS layers for a town
- Base layer Roads and boundaries
- Layer 1 Hospitals
- Layer 2 Schools
- Layer 3 Water bodies
- Layer 4 Flood-prone areas
Bhuvan
Bhuvan (Sanskrit for 'Earth') is a free, internet-based mapping application launched by the Indian Space Research Organisation (ISRO) on 12 August 2009. It shows images from Indian Remote Sensing satellites, such as CartoSat-1 and CartoSat-2. Users can explore places by entering names or coordinates, which makes it useful for scientists, teachers, planners and the public.
GNSS = satellites + ground control + receiver. GPS (USA) is one GNSS; India's is NavIC. GIS = hardware + software + data + people, organised in layers by location.
Worked example 1: Using GIS layers
A district plans a new primary health centre. Which layers help? Step 1: a population layer shows where people live. Step 2: a hospital layer shows existing health centres. Step 3: a road layer shows how people travel. Step 4: overlaying them reveals a crowded area with no centre within easy reach. Decision: that area is the best site. This is how GIS supports planning.
Worked example 2: Time from speed and distance
A cab app shows the destination 18 km away and the car's average speed as 36 km per hour. Time = distance ÷ speed = 18 ÷ 36 = 0.5 hour = 30 minutes. The GNSS receiver gives the position and speed; the map software does this calculation continuously, updating the estimated time as traffic changes.
Key takeaways: A GNSS uses space, control and user segments to give location, speed and time; examples are GPS (USA), GLONASS (Russia), Galileo (Europe), BeiDou (China) and NavIC (India). GPS, fully operational since 1995, uses 24 satellites in six orbits. A GIS stores location-linked data in layers that can be combined to make maps and decisions. ISRO's Bhuvan, launched in 2009, shows Indian satellite images online.
Check your understanding
-
1. India's own regional satellite navigation system is called:
- GLONASS
- NavIC (IRNSS)
- Galileo
- BeiDou
Show answer
Answer: B. India's system is IRNSS, named NavIC. GLONASS is Russian, Galileo European and BeiDou Chinese.
-
2. The basic GPS constellation consists of how many satellites?
- 7
- 12
- 24
- 64
Show answer
Answer: C. GPS was designed around 24 satellites in six orbits so that several are always in view.
-
3. In a GNSS, the receiver in your phone forms the:
- Space segment
- Control segment
- Ground station
- User segment
Show answer
Answer: D. The user segment is the receiver that converts satellite signals into location, speed and time.
-
4. Which is the key ingredient that links all data in a GIS?
- Location
- Colour
- Population
- Rainfall
Show answer
Answer: A. Every item in a GIS is tied to a location - a coordinate, address or distance - so layers can be overlaid.
-
5. Bhuvan, a free online mapping application, was launched by:
- The Survey of India in 1872
- ISRO in 2009
- NASA in 1995
- The United Nations in 1945
Show answer
Answer: B. The Indian Space Research Organisation launched Bhuvan on 12 August 2009.
Sign in to keep track of the lessons you finish.