• Practice
  • About 15 min
  • 5 practice questions

Maps, cartography and map scale

Define a map and cartography, list the components of a map, and use the three ways of showing scale - statement, representative fraction and linear scale - including converting between them.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define a map, cartography and a cartographer.
  • List the components every map should have.
  • Express scale as a statement, a representative fraction (R.F.) and a linear scale, and convert between them.

A map lets you see a whole district, a country or the world at one glance; as the saying goes, a map is worth a thousand words. To read one properly, you need to understand its parts. This lesson begins with the most important: the scale.

Maps and cartography

A map is a drawing of an area as seen from above: a small image of the three-dimensional Earth's surface on paper, cloth or any flat surface. Maps may show the whole world or only part of it. They are drawn to a scale and with a direction, and use a legend to explain their symbols and colours. The art and science of map-making is cartography, and a cartographer measures, analyses and interprets geographical information to make maps and charts. A map is the basic tool of a geographer and a guide to location.

Components of a map

  • Title Purpose or theme
  • Scale Map distance to ground distance
  • Direction Usually north at the top
  • Grid system Latitudes and longitudes
  • Projection Globe shown on a flat surface
  • Legend Key to the symbols
  • Conventional signs and symbols Standard symbols with set meanings

Title

The title tells the purpose or theme of the map, for example 'India - Physical', 'World - Political' or 'Tamil Nadu - Transport'.

Scale

The Earth is far too big to draw full size, so maps are reduced. Scale is the ratio between a distance on the map and the actual distance on the ground. It can be shown in three ways:

Three ways of showing scale
MethodHow it is writtenExample
Statement scaleIn words1 cm to 10 km (1 cm = 10 km)
Representative fraction (R.F.)As a ratio or fraction with the same unit on both sides1 : 1,00,000 or 1/100000
Linear (graphical) scaleA straight line divided into equal parts marked with ground distancesA bar marked 0, 1 km, 2 km ...

R.F. = distance on the map ÷ distance on the ground, both in the same unit. 1 km = 1,000 m = 1,00,000 cm.

An R.F. has no unit: 1 : 50,000 means one unit on the map (any unit - centimetre or inch) stands for 50,000 of the same unit on the ground. A linear scale is useful because it stays correct even if the map is enlarged or reduced on a photocopier.

Worked example 1: From statement scale to R.F.

Convert '1 cm to 2 km' into an R.F. Step 1: write both in the same unit. 2 km = 2 × 1,00,000 cm = 2,00,000 cm. Step 2: R.F. = 1 cm ÷ 2,00,000 cm. Answer: 1 : 2,00,000. Check: 1 cm to 1 km would give 1 : 1,00,000, so doubling the ground distance doubles the second number.

Worked example 2: Measuring distance with an R.F.

On a map with R.F. 1 : 50,000, two villages are 6 cm apart. How far apart are they on the ground? Step 1: ground distance = 6 × 50,000 = 3,00,000 cm. Step 2: 3,00,000 cm ÷ 1,00,000 = 3 km. Going the other way, a ground distance of 5 km on this map would be 5,00,000 ÷ 50,000 = 10 cm.

Key takeaways: A map is a reduced drawing of the Earth's surface seen from above; cartography is map-making. A map's components are the title, scale, direction, grid system, projection, legend and conventional signs. Scale can be a statement, an R.F. (same unit both sides, no unit overall) or a linear scale. To convert, change kilometres into centimetres: 1 km = 1,00,000 cm.

Check your understanding

  1. 1. The art and science of making maps is called:

    1. Cartography
    2. Demography
    3. Seismology
    4. Photography
    Show answer

    Answer: A. Cartography is map-making, and a cartographer is a person who makes maps.

  2. 2. What is the R.F. of a map whose scale is 1 cm to 5 km?

    1. 1 : 5,000
    2. 1 : 50,000
    3. 1 : 5,00,000
    4. 1 : 50,00,000
    Show answer

    Answer: C. 5 km = 5 × 1,00,000 cm = 5,00,000 cm, so R.F. = 1 : 5,00,000.

  3. 3. Which component of a map tells its purpose or theme?

    1. Legend
    2. Scale
    3. Grid
    4. Title
    Show answer

    Answer: D. The title, such as 'India - Physical', states what the map is about.

  4. 4. On a map of R.F. 1 : 1,00,000, two towns are 7 cm apart. Their actual distance is:

    1. 0.7 km
    2. 7 km
    3. 70 km
    4. 700 km
    Show answer

    Answer: B. 7 × 1,00,000 = 7,00,000 cm = 7 km.

  5. 5. Why does a linear scale stay correct when a map is enlarged on a photocopier?

    1. It is printed in red
    2. It has no numbers
    3. The scale bar is enlarged by the same amount as the map
    4. It uses miles instead of kilometres
    Show answer

    Answer: C. Because the bar is drawn on the map, it grows or shrinks with it, so measurements against it remain correct.

Privacy · Terms · Refunds · Delivery