Revision notes

Geography Unit 7 Mapping Skills: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Maps, cartography and map scale

Components of a map

  • Title Purpose or theme
  • Scale Map distance to ground distance
  • Direction Usually north at the top
  • Grid system Latitudes and longitudes
  • Projection Globe shown on a flat surface
  • Legend Key to the symbols
  • Conventional signs and symbols Standard symbols with set meanings
Three ways of showing scale
MethodHow it is writtenExample
Statement scaleIn words1 cm to 10 km (1 cm = 10 km)
Representative fraction (R.F.)As a ratio or fraction with the same unit on both sides1 : 1,00,000 or 1/100000
Linear (graphical) scaleA straight line divided into equal parts marked with ground distancesA bar marked 0, 1 km, 2 km ...

R.F. = distance on the map ÷ distance on the ground, both in the same unit. 1 km = 1,000 m = 1,00,000 cm.

Key takeaways: A map is a reduced drawing of the Earth's surface seen from above; cartography is map-making. A map's components are the title, scale, direction, grid system, projection, legend and conventional signs. Scale can be a statement, an R.F. (same unit both sides, no unit overall) or a linear scale. To convert, change kilometres into centimetres: 1 km = 1,00,000 cm.

Read the full lesson

Lesson 2

Direction, the grid system and map projections

Cardinal directions, clockwise from north

  1. North
  2. East
  3. South
  4. West

Then back to step 1: North

Three main kinds of projection

  • Cylindrical Paper wrapped as a cylinder
    • Good near the Equator
    • e.g. Mercator projection
    • High latitudes look too large
  • Conical Paper shaped as a cone
    • Good for middle latitudes
    • e.g. perspective conic
  • Planar (zenithal or azimuthal) Flat paper touching one point
    • Good for polar regions
    • e.g. orthographic
    • Used on the United Nations flag

Latitude first, then longitude; 1° = 60′, 1′ = 60″. Projections: cylindrical, conical, planar. No flat map is perfect.

Key takeaways: Maps usually have north at the top; the cardinal directions are north, east, south and west. Latitude and longitude form a grid and are written latitude first, in degrees and minutes. A projection transfers the globe's grid to a flat surface and keeps some of shape, area or direction; the main kinds are cylindrical, conical and planar.

Read the full lesson

Lesson 3

Legends, conventional signs and surveying

Three kinds of map symbols

  • Point symbols Mark a single spot
    • Buildings, temples, post offices
    • Wells, towers, trigonometrical points
  • Line symbols Show things that run in a line
    • Roads, railways
    • Rivers, canals
    • Power and telephone lines
  • Area symbols Cover a whole area
    • Cultivated land, orchards
    • Ponds, lakes
    • Forests, marshes
Colour codes used with map symbols
ColourUsed for (as given in the textbook)
BrownLand features: contour lines, rock outcrops, sand and dunes
Light blueWater features: rivers, canals, lakes, ponds, coastlines, marshes
Dark blueNational waterways
GreenVegetation: forests, cultivated fields, orchards, parks and reserves
BlackConstructed features: roads, tracks, railways, buildings, bridges, boundaries
RedMain roads, lighthouses and marine lights
PinkInternational boundaries

Legend = key to the map. Symbols are point, line or area. Blue = water, green = vegetation, brown = land and contours, black = constructed features.

Key takeaways: The legend explains a map's symbols and colours. Conventional signs are standard symbols with fixed meanings, of three kinds: point, line and area. Colours code features: blue for water, green for vegetation, brown for land, black for constructed features, red for main roads. Surveying measures the land with instruments such as the chain, prismatic compass, plane table, levels, theodolite, total station and GNSS.

Read the full lesson

Lesson 4

Remote sensing: aerial photography and satellites

Components of remote sensing

  1. Energy source (such as the Sun)
  2. Transmission path through the atmosphere
  3. Target on the Earth's surface
  4. Sensor that records the reflected energy

Satellite remote sensing and aerial photography

  • Satellite remote sensing Sensors on satellites in orbit
    • Very costly; years to plan and launch
    • Covers large areas quickly, worldwide
    • Revisits the same area regularly
    • Digital data, easy to improve with software
  • Aerial photography Cameras on aircraft, balloons or drones
    • Can be planned and done quickly and cheaply
    • Covers a small area; aircraft fly back and forth
    • Needs permission; each repeat costs extra
    • Badly affected by bad weather; photographs on film cannot be improved afterwards

Remote sensing = gathering information without touching. Components: energy source, path, target, sensor. Overlapping aerial photos give 3D views; satellites give wide, repeated, digital coverage.

Key takeaways: Remote sensing gathers information without contact, using an energy source, a transmission path, a target and a sensor. Aerial photography uses cameras on aircraft, balloons or drones, with overlapping photos that give 3D views; Nadar took the first aerial photos in 1858. Satellite remote sensing covers large areas repeatedly with digital data, but satellites are costly; aerial surveys are quicker and cheaper for small areas.

Read the full lesson

Lesson 5

GNSS, GPS, GIS and Bhuvan

Three segments of a GNSS

  1. Space segment: a group of satellites sends signals
  2. Control segment: ground stations monitor and correct the satellites
  3. User segment: a receiver turns the signals into location, speed and time
Major satellite navigation systems
Country or regionSystem
USANAVSTAR Global Positioning System (GPS)
RussiaGLONASS
EuropeGalileo
ChinaBeiDou
IndiaIRNSS, called NavIC

GIS layers for a town

  • Base layer Roads and boundaries
  • Layer 1 Hospitals
  • Layer 2 Schools
  • Layer 3 Water bodies
  • Layer 4 Flood-prone areas
Overlaying layers answers questions such as 'Which schools lie in flood-prone areas?'

GNSS = satellites + ground control + receiver. GPS (USA) is one GNSS; India's is NavIC. GIS = hardware + software + data + people, organised in layers by location.

Key takeaways: A GNSS uses space, control and user segments to give location, speed and time; examples are GPS (USA), GLONASS (Russia), Galileo (Europe), BeiDou (China) and NavIC (India). GPS, fully operational since 1995, uses 24 satellites in six orbits. A GIS stores location-linked data in layers that can be combined to make maps and decisions. ISRO's Bhuvan, launched in 2009, shows Indian satellite images online.

Read the full lesson

Privacy · Terms · Refunds · Delivery