• Foundation
  • About 20 min
  • 5 practice questions

Electron gain enthalpy, electronegativity, valence and chemical reactivity

Explain the trends in electron gain enthalpy and electronegativity, work out valences and oxidation states, predict formulas, explain the anomalous second-period elements and link trends to reactivity and the nature of oxides.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define electron gain enthalpy and explain its trends and exceptions.
  • Explain electronegativity and relate it to metallic and non-metallic character.
  • Find valences and oxidation states and predict formulas of simple compounds.
  • Explain the anomalous behaviour of second-period elements and the acidic or basic nature of oxides across a period.

Ionisation enthalpy tells us how easily an atom loses an electron. To understand non-metals we also need the opposite: how readily an atom gains an electron, and how strongly it pulls shared electrons in a bond. Together these properties explain why reactivity is greatest at the two ends of each period, and why oxides change from basic to acidic across it.

Electron gain enthalpy

Electron gain enthalpy (ΔegH) is the enthalpy change when an electron is added to a neutral gaseous atom to form an anion: X(g) + e⁻ → X⁻(g). For many elements energy is released, so ΔegH is negative. The halogens have very negative values because one extra electron gives them a noble gas configuration. The noble gases have large positive values because the added electron must enter the next, higher shell, giving an unstable arrangement. Some books use electron affinity instead, defined with the opposite sign, so that energy released counts as a positive electron affinity.

The trends are less regular than for ionisation enthalpy. Across a period, ΔegH generally becomes more negative: atoms get smaller and effective nuclear charge rises, so an added electron is held more strongly. Down a group, it generally becomes less negative, because the added electron is farther from the nucleus. But oxygen and fluorine are exceptions: their values are less negative than those of sulphur and chlorine just below them. An electron added to the small, crowded n = 2 shell of O or F suffers strong repulsion from the electrons already there; in the larger n = 3 shell of S or Cl it has more room. Adding a second electron to O⁻ requires energy, because the electron is pushed onto an ion that is already negative.

Electron gain enthalpies of some p-block elements
Group 16ΔegH / kJ mol⁻¹Group 17ΔegH / kJ mol⁻¹
O−141F−328
S−200Cl−349
Se−195Br−325
Te−190I−295

Worked example 1: ordering electron gain enthalpies

Arrange O, S, F and Cl from most negative to least negative ΔegH. Step 1: halogens (Group 17) gain an electron more readily than Group 16 elements in the same period, so F and Cl come before O and S. Step 2: within each group, the n = 3 element beats the n = 2 element because of repulsion in the compact 2p subshell, so Cl before F and S before O. Order: Cl (−349) > F (−328) > S (−200) > O (−141), in kJ mol⁻¹.

Electronegativity

Electronegativity is a qualitative measure of the ability of an atom in a compound to attract shared electrons to itself. Unlike ionisation enthalpy and electron gain enthalpy, it cannot be measured directly, and it is not even constant for an element: it depends on what the atom is bonded to. Several numerical scales exist, including the Pauling, Mulliken–Jaffe and Allred–Rochow scales. The most widely used is Linus Pauling's, in which fluorine, the most electronegative element, was assigned 4.0.

Electronegativity rises across period 2
Period 2LiBeBCNOF
Pauling value1.01.52.02.53.03.54.0

Electronegativity generally increases across a period and decreases down a group (for example F 4.0, Cl 3.0, Br 2.8, I 2.5), the same pattern as ionisation enthalpy. The reason is atomic size: the smaller the atom, the more strongly its nucleus attracts the bonding electrons. Because non-metals tend to gain electrons, electronegativity is directly related to non-metallic character and inversely related to metallic character.

Valence and oxidation state

For representative elements, the valence is usually equal to the number of outer electrons, or to eight minus that number: Group 1: 1; Group 2: 2; Group 13: 3; Group 14: 4; Group 15: 3 or 5; Group 16: 2 or 6; Group 17: 1 or 7; Group 18: 0 or 8. Today the term oxidation state is often used: it is the charge an atom is given in a compound when the shared electrons are assigned to the more electronegative atom. Many transition elements and actinoids show variable valence.

Valence of a representative element = number of outer electrons, or 8 minus that number. The oxidation state of an atom is the charge it acquires when shared electrons are assigned to the more electronegative partner.

Worked example 2: oxidation states and formulas

  • Cl₂O: oxygen (3.5) is more electronegative than chlorine (3.0), so O is −2. Two Cl atoms balance it: 2x − 2 = 0, x = +1.
  • ClF₃: fluorine is the most electronegative element, so each F is −1. For Cl: x − 3 = 0, x = +3.
  • Calcium and phosphorus: Ca (Group 2) has valence 2, P (Group 15) valence 3. Cross the valences: Ca₃P₂.
  • Gallium and oxygen: Ga (Group 13) valence 3, O valence 2 → Ga₂O₃. Germanium and chlorine: Ge valence 4, Cl valence 1 → GeCl₄.
  • [BF₄]⁻: each F is −1, so x − 4 = −1 and boron's oxidation state is +3, but it forms four bonds, so its covalency is 4. Oxidation state and covalency need not be equal.

Anomalous properties of second-period elements

The first member of Groups 1, 2 and 13 to 17 (lithium, beryllium and boron to fluorine) differs in many ways from the rest of its group. Lithium and beryllium form compounds with marked covalent character, while their heavier relatives form mainly ionic compounds; in fact lithium resembles magnesium and beryllium resembles aluminium, the diagonal relationship. The reasons are their small size, large charge/radius ratio and high electronegativity. Also, a second-period atom has only four valence orbitals (2s and 2p), so its maximum covalency is 4: boron forms [BF₄]⁻, whereas aluminium, with 3d orbitals available, can form [AlF₆]³⁻. Finally, second-period p-block elements readily form pπ–pπ multiple bonds with themselves and with each other, as in C=C, C≡C, N≡N, C=O and C≡N, much more than heavier members of their groups.

Periodic trends and chemical reactivity

Across a period, the element on the far left has the lowest ionisation enthalpy and the element on the far right (before the noble gas) has the most negative electron gain enthalpy. So reactivity is highest at the two ends and lowest in the middle: alkali metals react by losing an electron, halogens by gaining one. The nature of the oxides follows the same pattern. The oxide of the far-left element is the most basic (Na₂O), that of the far-right element the most acidic (Cl₂O₇), and oxides in the middle are amphoteric (Al₂O₃, As₂O₃), reacting with both acids and bases, or neutral (CO, NO, N₂O). Down a main group, radii increase, ionisation enthalpies fall, and metallic character increases. Transition metals change less in radius across a period, with ionisation enthalpies between those of the s- and p-blocks, so they are less electropositive than Groups 1 and 2.

The two ends of a period

  • Far left (e.g. sodium)
    • Lowest ionisation enthalpy
    • Reacts by losing an electron
    • Most metallic
    • Oxide basic: Na₂O + H₂O → 2NaOH
  • Middle (e.g. aluminium)
    • Intermediate properties
    • Lowest reactivity in the period
    • Oxide amphoteric (Al₂O₃) or neutral (CO)
  • Far right (e.g. chlorine)
    • Most negative electron gain enthalpy
    • Reacts by gaining an electron
    • Most non-metallic
    • Oxide acidic: Cl₂O₇ + H₂O → 2HClO₄

Worked example 3: showing the nature of oxides with equations

  • Basic oxide: MgO + H₂O → Mg(OH)₂, a base that turns red litmus blue.
  • Acidic oxide: SO₃ + H₂O → H₂SO₄, an acid that turns blue litmus red; similarly P₄O₁₀ + 6H₂O → 4H₃PO₄.
  • Amphoteric oxide, as a base with an acid: Al₂O₃ + 6HCl → 2AlCl₃ + 3H₂O.
  • Amphoteric oxide, as an acid with a base: Al₂O₃ + 2NaOH + 3H₂O → 2Na[Al(OH)₄]. Check the balance: Al 2 = 2; O 3 + 2 + 3 = 8 = 2 × 4; H 2 + 6 = 8 = 2 × 4.

Key takeaways

  • Electron gain enthalpy becomes more negative across a period and less negative down a group; F and O are less negative than Cl and S.
  • Electronegativity is not measurable directly; on Pauling's scale it rises across a period and falls down a group, following non-metallic character.
  • Valence of a main group element is the number of outer electrons or eight minus it; oxidation state comes from electronegativity.
  • Second-period elements are anomalous: small size, maximum covalency 4 and strong pπ–pπ bonding.
  • Reactivity peaks at both ends of a period; oxides change from basic through amphoteric or neutral to acidic.

Check your understanding

  1. 1. Which halogen has the most negative electron gain enthalpy?

    1. Fluorine
    2. Chlorine
    3. Bromine
    4. Iodine
    Show answer

    Answer: B. Chlorine (−349 kJ mol⁻¹) is more negative than fluorine (−328 kJ mol⁻¹), because an electron added to fluorine's compact 2p subshell suffers more repulsion. Bromine and iodine are less negative because they are larger.

  2. 2. Magnesium and phosphorus combine to form a binary compound. Its formula is most likely:

    1. MgP
    2. Mg₂P₃
    3. Mg₃P₂
    4. MgP₂
    Show answer

    Answer: C. Mg (Group 2) has valence 2 and P (Group 15) has valence 3 (8 − 5). Crossing the valences gives Mg₃P₂: 3 × 2 = 6 and 2 × 3 = 6, so the charges balance.

  3. 3. What is the oxidation state of chlorine in Cl₂O₇?

    1. +1
    2. +5
    3. −1
    4. +7
    Show answer

    Answer: D. Oxygen is more electronegative, so each O is −2: total −14. For the molecule to be neutral, 2x − 14 = 0, so x = +7.

  4. 4. Which of the following oxides is amphoteric?

    1. Al₂O₃
    2. Na₂O
    3. SO₃
    4. CO
    Show answer

    Answer: A. Al₂O₃ reacts with acids (forming AlCl₃ with HCl) and with bases (forming Na[Al(OH)₄] with NaOH), so it is amphoteric. Na₂O is basic, SO₃ is acidic and CO is neutral.

  5. 5. Assertion (A): The electronegativity of an element has the same value in all of its compounds. Reason (R): On the Pauling scale, fluorine was assigned an electronegativity of 4.0.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: D. A is false: electronegativity is not a fixed, measurable property; it varies with the atom an element is bonded to. R is true: Pauling assigned 4.0 to fluorine, the most electronegative element.

Privacy · Terms · Refunds · Delivery