• Foundation
  • About 18 min
  • 5 practice questions

Electronic configuration and the s, p, d and f blocks

Classify elements into s, p, d and f blocks from their electronic configurations, find the period and group of an element from its configuration, and tell metals, non-metals and metalloids apart.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why elements of one group have similar properties.
  • Write the general outer configuration of s-, p-, d- and f-block elements and describe their main features.
  • Find the block, period and group of an element from its electronic configuration.
  • Describe how metallic character changes across a period and down a group, and identify metalloids.

The aufbau principle tells us the order in which electrons fill orbitals. Put that order next to the periodic table and a striking match appears: the shape of the table is simply a map of which orbital is being filled. This lesson uses that match to sort the elements into four blocks and to locate any element from its configuration.

Groups share outer configurations

Elements in the same group have the same number of electrons in their outer orbitals, arranged in the same way, and so they show similar chemical behaviour. All Group 1 elements (the alkali metals), for example, end in ns¹:

Group 1: the same ns¹ outer configuration
ElementZElectronic configuration
Lithium3[He]2s¹
Sodium11[Ne]3s¹
Potassium19[Ar]4s¹
Rubidium37[Kr]5s¹
Caesium55[Xe]6s¹
Francium87[Rn]7s¹

Notice that atomic numbers within a period are consecutive, while down a group they increase in steps (here 8, 8, 18, 18, 32) equal to the lengths of the periods in between.

The four blocks

The block of an element is named after the type of orbital (s, p, d or f) that receives the last electron in building up its configuration. Two elements need special mention. Helium (1s²) strictly belongs to the s-block, but its valence shell is completely filled, so it behaves like a noble gas and is placed in Group 18. Hydrogen (1s¹) has one s electron like the alkali metals, yet it can also gain one electron to reach a noble gas arrangement, like the halogens; because it fits neither family fully, it is shown separately at the top of the table.

Blocks of the periodic table

  • s-block Groups 1 and 2
    • Outer configuration ns¹ or ns²
    • Reactive metals with low ionisation enthalpy
    • Form M⁺ (Group 1) or M²⁺ (Group 2) ions
  • p-block Groups 13 to 18
    • Outer configuration ns²np¹ to ns²np⁶
    • Metals, metalloids, non-metals and noble gases
    • Halogens and chalcogens gain electrons easily
  • d-block Groups 3 to 12 (transition elements)
    • Outer configuration (n−1)d¹⁻¹⁰ns⁰⁻²
    • All metals; coloured ions, variable oxidation states
    • Paramagnetism and catalytic activity common
  • f-block Lanthanoids and actinoids (inner transition elements)
    • Outer configuration (n−2)f¹⁻¹⁴(n−1)d⁰⁻¹ns²
    • All metals; actinoids are radioactive
    • Similar properties within each series
s- and p-block elements together are the representative or main group elements.

Features of each block

s-block (Groups 1 and 2). These are reactive metals with low ionisation enthalpies. They readily lose their outer electron(s) to form 1+ ions (alkali metals) or 2+ ions (alkaline earth metals). Metallic character and reactivity increase down each group. They are so reactive that they never occur free in nature. Their compounds are mainly ionic, except those of lithium and beryllium.

p-block (Groups 13 to 18). Together with the s-block they form the representative or main group elements. Each period ends with a noble gas whose closed shell (ns²np⁶) is very hard to disturb, so noble gases are very unreactive. Just before them come two important non-metal families, the halogens (Group 17) and the chalcogens (Group 16), which have highly negative electron gain enthalpies and readily gain one or two electrons respectively. Non-metallic character rises from left to right across a period and metallic character rises down a group.

d-block (Groups 3 to 12). In these transition elements the last electron enters an inner d subshell. Their general outer configuration is (n−1)d¹⁻¹⁰ns⁰⁻²; palladium (4d¹⁰5s⁰) is an exception with no s electron. All are metals; they usually form coloured ions, show variable oxidation states and paramagnetism, and many are used as catalysts. Zinc, cadmium and mercury, with a full (n−1)d¹⁰ns² arrangement, lack most of these typical properties. The name 'transition' reflects their place as a bridge between the very active s-block metals and the less active elements of Groups 13 and 14.

f-block (inner transition elements). The two rows at the foot of the table are the lanthanoids, cerium (Z = 58) to lutetium (Z = 71), and the actinoids, thorium (Z = 90) to lawrencium (Z = 103). The last electron enters an f orbital. All are metals, and properties within each series are very similar. Early actinoids show many oxidation states, which makes their chemistry more complicated than that of the lanthanoids. All actinoids are radioactive; many have been made only in tiny amounts, and the elements after uranium are called transuranium elements.

Locating an element from its configuration

Period = highest principal quantum number n. Block = orbital that receives the last electron. Group: s-block = number of ns electrons; p-block = 10 + number of ns and np electrons; d-block = number of (n−1)d electrons + number of ns electrons.

Worked example 1: three elements

  1. Z = 34: 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁴. Highest n = 4 → period 4. Last electron in 4p → p-block. Group = 10 + (2 + 4) = 16. This is selenium, a chalcogen.
  2. Z = 26: [Ar]3d⁶4s². Highest n = 4 → period 4. Last electron in 3d → d-block. Group = 6 + 2 = 8. This is iron, a transition metal.
  3. Z = 56: [Xe]6s². Highest n = 6 → period 6. Last electron in 6s → s-block, Group 2. This is barium, an alkaline earth metal.

Worked example 2: predicting beyond the known table

Where would element 119 go? Element 118 (oganesson) completes period 7 with 7p⁶. The next electron must start a new shell, n = 8, in the 8s orbital. So element 119 would have the configuration [Og]8s¹ (equivalently [Rn]5f¹⁴6d¹⁰7s²7p⁶8s¹), placing it in period 8, s-block, Group 1: it should behave like an alkali metal. Working the other way, an element with outer configuration 5s²5p³ is in period 5 (n = 5), p-block, Group 10 + 5 = 15; this is antimony (Z = 51).

Metals, non-metals and metalloids

A second, broader classification divides elements by properties. Metals make up more than 78% of the known elements and lie on the left and in the centre of the table. They are usually solids at room temperature (mercury is a liquid, and gallium and caesium melt only a little above room temperature, at about 303 K and 302 K), have high melting and boiling points, conduct heat and electricity well, and are malleable and ductile. Non-metals lie at the top right. They are solids or gases with low melting and boiling points (boron and carbon are exceptions), conduct poorly, and the solids are brittle. Across a period, character changes from metallic to non-metallic; down a group, it becomes more metallic. The change is gradual: elements along the zig-zag border, such as silicon, germanium, arsenic, antimony and tellurium, show properties of both and are called metalloids or semi-metals.

Worked example 3: ordering metallic character

Arrange Cl, Al, K and Mg in increasing metallic character. Step 1: Mg (Group 2), Al (Group 13) and Cl (Group 17) are all in period 3; metallic character falls from left to right, so Cl < Al < Mg. Step 2: potassium is in Group 1 like sodium but one period lower; it is more metallic than sodium, which is already more metallic than magnesium. Answer: Cl < Al < Mg < K.

Key takeaways

  • Similar outer electronic configurations give members of a group similar properties.
  • The block is set by the orbital receiving the last electron: s (Groups 1–2), p (13–18), d (3–12), f (lanthanoids and actinoids).
  • Period = outermost n; group follows from the number of outer s, p and d electrons.
  • Helium and hydrogen are special cases in their placement.
  • Metallic character decreases across a period and increases down a group; metalloids sit along the border.

Check your understanding

  1. 1. An element has the outer electronic configuration 3d⁵4s¹. To which group of the periodic table does it belong?

    1. Group 1
    2. Group 6
    3. Group 5
    4. Group 11
    Show answer

    Answer: B. The last electrons are in 3d, so it is a d-block element. For d-block, group = (n−1)d electrons + ns electrons = 5 + 1 = 6. This is chromium.

  2. 2. Which of the following elements is a metalloid?

    1. Sodium
    2. Sulphur
    3. Calcium
    4. Germanium
    Show answer

    Answer: D. Germanium lies on the zig-zag border between metals and non-metals and shows properties of both. Sodium and calcium are metals and sulphur is a non-metal.

  3. 3. Assertion (A): Zinc, cadmium and mercury do not show most of the characteristic properties of transition elements. Reason (R): They have a completely filled (n−1)d¹⁰ns² configuration.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both statements are true. Typical transition properties such as coloured ions and variable oxidation states depend on partly filled d orbitals. Zn, Cd and Hg have full d¹⁰ subshells, so R correctly explains A.

  4. 4. The element with atomic number 37 belongs to:

    1. p-block, period 4, group 17
    2. d-block, period 5, group 7
    3. s-block, period 5, group 1
    4. s-block, period 4, group 1
    Show answer

    Answer: C. Z = 37 has the configuration [Kr]5s¹. The highest n is 5, so it is in period 5; the last electron enters an s orbital, so it is s-block, Group 1 (rubidium, an alkali metal).

  5. 5. Helium has the configuration 1s², yet it is placed in Group 18 rather than with the s-block. Why?

    1. Helium has the largest atom in its period
    2. Its valence shell is completely filled, so it behaves like the other noble gases
    3. Helium readily loses two electrons like Group 2 metals
    4. Helium has eight electrons in its outer shell
    Show answer

    Answer: B. Although its last electron is in an s orbital, helium's only shell (n = 1) is full. A complete valence shell gives it noble gas properties, so it is placed with Group 18. It has 2 outer electrons, not 8, and does not form He²⁺ in chemistry.

Privacy · Terms · Refunds · Delivery