- Foundation
- About 17 min
- 5 practice questions
Modern periodic law, the long form table and naming elements above Z = 100
State the modern periodic law, explain why periods have 2, 8, 8, 18, 18, 32 and 32 elements from the orbitals being filled, and name any element above atomic number 100 by IUPAC rules.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain how Moseley's work made atomic number the basis of the periodic table.
- State the modern periodic law and describe the long form of the periodic table.
- Relate the length of each period to the orbitals filled in it.
- Give the IUPAC systematic name and symbol of an element with Z > 100.
When Mendeleev built his table, nobody knew what was inside an atom. Early in the twentieth century, the discovery of protons, electrons and the nucleus gave chemists a deeper reason for periodicity. This lesson shows how the periodic law was rewritten in terms of atomic number, how the modern table is laid out, and how new heavy elements are named.
Moseley and the atomic number
In 1913 the English physicist Henry Moseley studied the characteristic X-rays given out by different elements. He found that when the square root of the X-ray frequency (√ν) is plotted against the atomic number (Z), the result is a straight line; plotting √ν against atomic mass gives no such simple line. This showed that atomic number is a more fundamental property of an element than its atomic mass. The atomic number equals the number of protons in the nucleus, which also equals the number of electrons in the neutral atom.
Modern periodic law: the physical and chemical properties of the elements are periodic functions of their atomic numbers.
Worked example 1: how atomic number removes Mendeleev's anomalies
Tellurium has atomic mass 127.6 and iodine 126.9, so ordering by mass would put iodine first, against their properties. Their atomic numbers are Te = 52 and I = 53. Ordering by Z places tellurium first, exactly where its properties belong, with no special exception needed. The same happens with cobalt (mass 58.93, Z = 27) and nickel (mass 58.69, Z = 28): by mass nickel would come first, but by atomic number cobalt correctly precedes nickel. The 'anomalies' disappear because atomic number, not mass, is what controls the electron arrangement.
Since Z fixes the number of electrons, the periodic law is really a consequence of the periodic repetition of electronic configurations. Elements with similar outer electron arrangements show similar properties.
The long form of the periodic table
Many forms of the table have been proposed, but the long form is the most widely used. Its horizontal rows are periods (Mendeleev called them series) and its vertical columns are groups or families. Elements with similar outer electronic configurations sit in the same group. On IUPAC's recommendation the groups are numbered 1 to 18, replacing the older labels IA to VIIA, VIII, IB to VIIB and 0. There are seven periods, and the period number equals the highest principal quantum number (n) of the electrons in the atom. The fourteen lanthanoids (period 6) and fourteen actinoids (period 7) are shown in two separate rows at the bottom so that the table keeps a manageable width. This arrangement owes much to Glenn T. Seaborg, whose work on the transuranium elements led to the actinoids being placed below the lanthanoids; element 106, seaborgium, is named after him.
Why the periods have different lengths
Each period begins when a new principal shell starts to fill and ends when its p orbitals are complete at a noble gas. Because every orbital holds two electrons, the number of elements in a period is twice the number of orbitals filled in it. Period 4 is the first to include d orbitals: after the 4s orbital fills at potassium and calcium, the 3d orbitals become lower in energy than 4p and fill from scandium (Z = 21) to zinc (Z = 30), the 3d transition series. The 4d series begins at yttrium (Z = 39) in period 5. In period 6 the 4f orbitals fill from cerium (Z = 58) to lutetium (Z = 71), the lanthanoids, and in period 7 the 5f orbitals fill after actinium (Z = 89), the actinoids.
| Period | n | Orbitals filled (in order) | Number of orbitals | Number of elements |
|---|---|---|---|---|
| 1 | 1 | 1s | 1 | 2 |
| 2 | 2 | 2s, 2p | 4 | 8 |
| 3 | 3 | 3s, 3p | 4 | 8 |
| 4 | 4 | 4s, 3d, 4p | 9 | 18 |
| 5 | 5 | 5s, 4d, 5p | 9 | 18 |
| 6 | 6 | 6s, 4f, 5d, 6p | 16 | 32 |
| 7 | 7 | 7s, 5f, 6d, 7p | 16 | 32 |
Worked example 2: why period 4 has 18 elements
Step 1: in period 4 the orbitals available, in order of increasing energy, are 4s < 3d < 4p. Step 2: count them: one 4s orbital + five 3d orbitals + three 4p orbitals = 9 orbitals. Step 3: each holds 2 electrons, so 9 × 2 = 18 electrons can be added, one per element. Step 4: check against the table: period 4 runs from potassium (Z = 19) to krypton (Z = 36), and 36 − 19 + 1 = 18 elements. The same reasoning with 6s, 4f, 5d and 6p (1 + 7 + 5 + 3 = 16 orbitals) gives 32 elements for period 6.
Naming elements with atomic numbers above 100
Traditionally the discoverer of an element proposed its name and IUPAC confirmed it. For very heavy elements this caused disputes: such elements are so unstable that only a few atoms are ever made, using costly equipment in a few laboratories, and rival groups sometimes claimed the same discovery. Element 104, for example, was named rutherfordium by American scientists and kurchatovium by Soviet scientists. To avoid confusion, IUPAC recommended that until a discovery is proved and a name officially approved, an element gets a systematic name built from its atomic number.
| Digit | Root | Abbreviation |
|---|---|---|
| 0 | nil | n |
| 1 | un | u |
| 2 | bi | b |
| 3 | tri | t |
| 4 | quad | q |
| 5 | pent | p |
| 6 | hex | h |
| 7 | sept | s |
| 8 | oct | o |
| 9 | enn | e |
Building a systematic name
- Write the digits of Z For example 1, 2, 6 for Z = 126.
- Replace each digit by its root un, bi, hex.
- Join the roots and add 'ium' When 'bi' or 'tri' meets 'ium', one i is dropped: unbihexium.
- Take the first letter of each root Three-letter symbol, first letter capital: Ubh.
Worked example 3: systematic names
- Z = 119: digits 1, 1, 9 → un + un + enn + ium = ununennium, symbol Uue.
- Z = 126: digits 1, 2, 6 → un + bi + hex + ium = unbihexium, symbol Ubh.
- Z = 130: digits 1, 3, 0 → un + tri + nil + ium = untrinilium, symbol Utn.
- Reverse: unbiquadium → un (1), bi (2), quad (4) → Z = 124, symbol Ubq.
The temporary name is later replaced by a permanent name and symbol chosen through IUPAC. A permanent name may honour a scientist or the place of discovery. All elements up to Z = 118 now have official names, for example mendelevium (101), seaborgium (106) and oganesson (118).
Key takeaways
- Moseley showed that atomic number, not atomic mass, is the fundamental property; the periodic law was restated in terms of atomic number.
- The long form table has 7 periods and 18 groups; the period number is the principal quantum number of the outermost shell.
- Elements in a period = 2 × number of orbitals filled, giving 2, 8, 8, 18, 18, 32 and 32.
- Systematic IUPAC names join digit roots and add 'ium'; the symbol uses the first letter of each root.
Check your understanding
-
1. Moseley obtained a straight line when he plotted the square root of the X-ray frequency of elements against their:
- atomic mass
- density
- number of neutrons
- atomic number
Show answer
Answer: D. The plot of √ν against atomic number Z gave a straight line, while a plot against atomic mass did not. This showed that atomic number is the more fundamental property and led to the modern periodic law.
-
2. What is the IUPAC systematic name and symbol for the element with atomic number 123?
- Unbitrium, Ubt
- Ununtrium, Uut
- Untribium, Utb
- Unbitriium, Ubt
Show answer
Answer: A. Digits 1, 2, 3 give the roots un, bi, tri. Adding 'ium' gives un-bi-tri-ium; the i of 'tri' is dropped before 'ium', so the name is unbitrium and the symbol Ubt. 'Ununtrium' would be 113 and 'Untribium' would be 132.
-
3. In one period of the long form table, electrons enter the 6s, 4f, 5d and 6p orbitals. How many elements does this period contain?
- 18
- 8
- 32
- 16
Show answer
Answer: C. Count orbitals: 6s (1) + 4f (7) + 5d (5) + 6p (3) = 16 orbitals. Each holds 2 electrons, so 16 × 2 = 32 elements. This is period 6.
-
4. In the modern periodic table, the period number of an element gives:
- its atomic number
- the principal quantum number of its outermost shell
- the number of valence electrons
- its azimuthal quantum number
Show answer
Answer: B. Each new period starts when a new principal shell begins to fill, so the period number equals the highest principal quantum number n present. Sodium, for example, has its outer electron in n = 3 and lies in period 3.
-
5. Assertion (A): In the modern periodic table, tellurium (Z = 52) comes before iodine (Z = 53) although tellurium has the greater atomic mass. Reason (R): The modern periodic table arranges elements in order of increasing atomic number.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both statements are true. Because elements are ordered by atomic number, tellurium (52) automatically comes before iodine (53), whatever their masses. So R is the correct explanation of A.
Sign in to keep track of the lessons you finish.