Revision notes

Chapter 3 Classification of Elements and Periodicity in Properties: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Why classify elements: triads, octaves and Mendeleev's periodic law

Mendeleev's periodic law: the properties of the elements are a periodic function of their atomic weights.

Mendeleev's predictions compared with the elements found later
PropertyEka-aluminium (predicted)Gallium (found)Eka-silicon (predicted)Germanium (found)
Atomic weightabout 68about 70about 72about 72.6
Oxide formulaE₂O₃Ga₂O₃EO₂GeO₂
Chloride formulaECl₃GaCl₃ECl₄GeCl₄
Melting pointLowLow (about 303 K)HighHigh

From triads to the periodic law

  1. Döbereiner, 1829 Triads: the middle element's atomic weight is about the average of the other two.
  2. De Chancourtois, 1862 Elements by atomic weight wound around a cylinder.
  3. Newlands, 1865 Law of octaves: every eighth element resembles the first; works up to calcium.
  4. Mendeleev and Lothar Meyer, 1869 Periodic law based on atomic weights; gaps left and new elements predicted.
Each step organised more elements than the one before.
  • Classification organises known facts about elements and helps predict new ones.
  • Döbereiner's triads and Newlands' octaves each worked for only a limited set of elements.
  • Mendeleev's periodic law states that properties are a periodic function of atomic weight.
  • Mendeleev placed similar elements together even when that broke the atomic-weight order (tellurium and iodine), and left gaps for undiscovered elements.
  • The discovery of gallium and germanium with the predicted properties made his table widely accepted.
Read the full lesson

Lesson 2

Modern periodic law, the long form table and naming elements above Z = 100

Modern periodic law: the physical and chemical properties of the elements are periodic functions of their atomic numbers.

Each orbital holds two electrons, so elements = 2 × orbitals
PeriodnOrbitals filled (in order)Number of orbitalsNumber of elements
111s12
222s, 2p48
333s, 3p48
444s, 3d, 4p918
555s, 4d, 5p918
666s, 4f, 5d, 6p1632
777s, 5f, 6d, 7p1632
IUPAC numerical roots for systematic names
DigitRootAbbreviation
0niln
1unu
2bib
3trit
4quadq
5pentp
6hexh
7septs
8octo
9enne

Building a systematic name

  1. Write the digits of Z For example 1, 2, 6 for Z = 126.
  2. Replace each digit by its root un, bi, hex.
  3. Join the roots and add 'ium' When 'bi' or 'tri' meets 'ium', one i is dropped: unbihexium.
  4. Take the first letter of each root Three-letter symbol, first letter capital: Ubh.
  • Moseley showed that atomic number, not atomic mass, is the fundamental property; the periodic law was restated in terms of atomic number.
  • The long form table has 7 periods and 18 groups; the period number is the principal quantum number of the outermost shell.
  • Elements in a period = 2 × number of orbitals filled, giving 2, 8, 8, 18, 18, 32 and 32.
  • Systematic IUPAC names join digit roots and add 'ium'; the symbol uses the first letter of each root.
Read the full lesson

Lesson 3

Electronic configuration and the s, p, d and f blocks

Group 1: the same ns¹ outer configuration
ElementZElectronic configuration
Lithium3[He]2s¹
Sodium11[Ne]3s¹
Potassium19[Ar]4s¹
Rubidium37[Kr]5s¹
Caesium55[Xe]6s¹
Francium87[Rn]7s¹

Blocks of the periodic table

  • s-block Groups 1 and 2
    • Outer configuration ns¹ or ns²
    • Reactive metals with low ionisation enthalpy
    • Form M⁺ (Group 1) or M²⁺ (Group 2) ions
  • p-block Groups 13 to 18
    • Outer configuration ns²np¹ to ns²np⁶
    • Metals, metalloids, non-metals and noble gases
    • Halogens and chalcogens gain electrons easily
  • d-block Groups 3 to 12 (transition elements)
    • Outer configuration (n−1)d¹⁻¹⁰ns⁰⁻²
    • All metals; coloured ions, variable oxidation states
    • Paramagnetism and catalytic activity common
  • f-block Lanthanoids and actinoids (inner transition elements)
    • Outer configuration (n−2)f¹⁻¹⁴(n−1)d⁰⁻¹ns²
    • All metals; actinoids are radioactive
    • Similar properties within each series
s- and p-block elements together are the representative or main group elements.

Period = highest principal quantum number n. Block = orbital that receives the last electron. Group: s-block = number of ns electrons; p-block = 10 + number of ns and np electrons; d-block = number of (n−1)d electrons + number of ns electrons.

  • Similar outer electronic configurations give members of a group similar properties.
  • The block is set by the orbital receiving the last electron: s (Groups 1–2), p (13–18), d (3–12), f (lanthanoids and actinoids).
  • Period = outermost n; group follows from the number of outer s, p and d electrons.
  • Helium and hydrogen are special cases in their placement.
  • Metallic character decreases across a period and increases down a group; metalloids sit along the border.
Read the full lesson

Lesson 4

Atomic radius, ionic radius and ionisation enthalpy

Atomic radius falls across period 2
Period 2 atomLiBeBCNOF
Atomic radius / pm1521118877746664
Atomic radius rises down Group 1
Group 1 atomLiNaKRbCs
Atomic radius / pm152186231244262

First ionisation enthalpy (ΔᵢH) is the energy needed to remove the most loosely bound electron from an isolated gaseous atom in its ground state: X(g) → X⁺(g) + e⁻. It is always positive and is expressed in kJ mol⁻¹.

First ionisation enthalpies of period 2 (standard values)
ElementLiBeBCNOFNe
ΔᵢH / kJ mol⁻¹52089980110861402131416812081

How the size-related properties change

  • Across a period (left to right)
    • Same outer shell, nuclear charge rises
    • Effective nuclear charge increases
    • Atomic radius decreases
    • Ionisation enthalpy generally increases
    • Exceptions: B < Be and O < N
  • Down a group (top to bottom)
    • A new shell is added each step
    • Shielding by inner shells increases
    • Atomic radius increases
    • Ionisation enthalpy decreases
    • Outer electron is lost more easily
  • Covalent radius = half the single-bond distance between identical atoms; metallic radius = half the distance between neighbouring metal atoms.
  • Atomic radius decreases across a period and increases down a group.
  • Cations are smaller and anions larger than their parent atoms; among isoelectronic species, higher nuclear charge means smaller size.
  • Ionisation enthalpy generally increases across a period and decreases down a group, with dips at B and O.
  • A large jump in successive ionisation enthalpies marks the end of the valence electrons.
Read the full lesson

Lesson 5

Electron gain enthalpy, electronegativity, valence and chemical reactivity

Electron gain enthalpies of some p-block elements
Group 16ΔegH / kJ mol⁻¹Group 17ΔegH / kJ mol⁻¹
O−141F−328
S−200Cl−349
Se−195Br−325
Te−190I−295
Electronegativity rises across period 2
Period 2LiBeBCNOF
Pauling value1.01.52.02.53.03.54.0

Valence of a representative element = number of outer electrons, or 8 minus that number. The oxidation state of an atom is the charge it acquires when shared electrons are assigned to the more electronegative partner.

The two ends of a period

  • Far left (e.g. sodium)
    • Lowest ionisation enthalpy
    • Reacts by losing an electron
    • Most metallic
    • Oxide basic: Na₂O + H₂O → 2NaOH
  • Middle (e.g. aluminium)
    • Intermediate properties
    • Lowest reactivity in the period
    • Oxide amphoteric (Al₂O₃) or neutral (CO)
  • Far right (e.g. chlorine)
    • Most negative electron gain enthalpy
    • Reacts by gaining an electron
    • Most non-metallic
    • Oxide acidic: Cl₂O₇ + H₂O → 2HClO₄
  • Electron gain enthalpy becomes more negative across a period and less negative down a group; F and O are less negative than Cl and S.
  • Electronegativity is not measurable directly; on Pauling's scale it rises across a period and falls down a group, following non-metallic character.
  • Valence of a main group element is the number of outer electrons or eight minus it; oxidation state comes from electronegativity.
  • Second-period elements are anomalous: small size, maximum covalency 4 and strong pπ–pπ bonding.
  • Reactivity peaks at both ends of a period; oxides change from basic through amphoteric or neutral to acidic.
Read the full lesson

Privacy · Terms · Refunds · Delivery