- Foundation
- About 24 min
- 5 practice questions
Common ion effect, hydrolysis of salts, buffer solutions and the solubility product
Calculate the pH of a weak acid or base with a common ion, predict whether salt solutions are acidic, basic or neutral, design buffers with the Henderson-Hasselbalch equation, and use Ksp for solubility and precipitation.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain the common ion effect and calculate its effect on pH and degree of ionization.
- Predict the pH of solutions of the four types of salt and use pH = 7 + ½(pKa − pKb).
- Derive and use the Henderson-Hasselbalch equation to find or design a buffer's pH.
- Relate Ksp to molar solubility, decide whether a precipitate forms, and explain the common ion effect on solubility.
Weak acids and bases seldom sit alone in solution: their own ions arrive from salts, and salts react with water. This lesson follows those effects through to two very practical ideas, buffers that hold pH steady and the solubility product that tells us when a solid will precipitate. As before, Kw = 1.0 × 10⁻¹⁴ at 298 K, log 2 = 0.301 and log 3 = 0.477.
Common ion effect in weak acids and bases
In acetic acid, CH₃COOH ⇌ H⁺ + CH₃COO⁻. Adding acetate ions (from sodium acetate) or H⁺ ions (from a strong acid) pushes this equilibrium to the left, so the acid ionises less. A shift in an equilibrium caused by adding a substance that supplies an ion already present is the common ion effect; it is simply Le Chatelier's principle at work.
Worked example 1: acetic acid with sodium acetate
Take Ka = 1.8 × 10⁻⁵ for acetic acid. A solution is 0.10 M in CH₃COOH and 0.10 M in CH₃COONa. Let x ionise: [H⁺] = x, [CH₃COO⁻] = 0.10 + x ≈ 0.10, [CH₃COOH] = 0.10 − x ≈ 0.10. Then 1.8 × 10⁻⁵ = x(0.10)/0.10, so x = [H⁺] = 1.8 × 10⁻⁵ M and pH = 5 − log 1.8 = 5 − 0.255 = 4.74 (log 1.8 = log 2 + 2 log 3 − 1 = 0.255).
Without the salt, 0.10 M acetic acid has [H⁺] = √(1.8 × 10⁻⁶) = 1.34 × 10⁻³ M (pH 2.87, α = 1.34 %). With it, α = 1.8 × 10⁻⁵/0.10 = 0.018 %: the common ion has cut ionisation about 75-fold.
Hydrolysis of salts
Salts ionise completely in water. Cations of strong bases (Na⁺, K⁺, Ca²⁺, Ba²⁺) and anions of strong acids (Cl⁻, Br⁻, NO₃⁻, ClO₄⁻) are only hydrated. But ions from a weak acid or weak base react with water to re-form that weak acid or base; this is hydrolysis, and it changes the pH.
pH of salt solutions
-
Strong acid + strong base
- e.g. NaCl, KNO₃
- No hydrolysis: neutral, pH = 7
-
Weak acid + strong base
- e.g. CH₃COONa
- CH₃COO⁻ + H₂O ⇌ CH₃COOH + OH⁻
- Basic, pH > 7
-
Strong acid + weak base
- e.g. NH₄Cl
- NH₄⁺ + H₂O ⇌ NH₄OH + H⁺
- Acidic, pH < 7
-
Weak acid + weak base
- e.g. CH₃COONH₄
- Both ions hydrolyse
- pH = 7 + ½(pKa − pKb)
For a salt of a weak acid and a weak base, the degree of hydrolysis does not depend on concentration and pH = 7 + ½(pKa − pKb): above 7 if pKa > pKb, below 7 if pKa < pKb. Ammonium acetate, whose two pK values are almost equal, is almost exactly neutral.
Worked example 2: a weak acid-weak base salt
A salt is formed from a weak acid with pKa = 4.20 and a weak base with pKb = 4.80 (illustrative values). pH = 7 + ½(4.20 − 4.80) = 7 + ½(−0.60) = 7 − 0.30 = 6.70, slightly acidic, because the base is the weaker partner.
Buffer solutions
Blood, urine, and many medicines and cosmetics must stay at a definite pH. A buffer solution resists change in pH on dilution or on adding small amounts of acid or alkali. An acidic buffer is a weak acid with its salt of a strong base (acetic acid + sodium acetate, around pH 4.75); a basic buffer is a weak base with its salt of a strong acid (ammonia + ammonium chloride, around pH 9.25).
Derivation for HA + H₂O ⇌ H₃O⁺ + A⁻: Ka = [H₃O⁺][A⁻]/[HA], so [H₃O⁺] = Ka[HA]/[A⁻]. Taking −log of both sides: pH = pKa + log([A⁻]/[HA]). The weak acid barely ionises, so [HA] ≈ acid taken, and nearly all A⁻ comes from the salt, so [A⁻] ≈ salt taken.
Henderson-Hasselbalch equation: pH = pKa + log([salt]/[acid]) for an acidic buffer; pOH = pKb + log([conjugate acid]/[base]), or pH = pKa(BH⁺) + log([base]/[conjugate acid]), for a basic buffer.
When [salt] = [acid], pH = pKa (log 1 = 0), so to make a buffer of a given pH choose an acid whose pKa is close to it. Dilution changes both concentrations by the same factor, so the ratio and the pH stay the same.
Worked example 3: designing and checking buffers
(a) 0.10 M CH₃COOH with 0.20 M CH₃COONa (pKa = 4.74): pH = 4.74 + log(0.20/0.10) = 4.74 + 0.301 = 5.04.
(b) 40 mL of 0.10 M NH₃ is mixed with 20 mL of 0.10 M HCl (take pKb = 4.75 for NH₃). NH₃ = 4.0 mmol, HCl = 2.0 mmol; the acid converts 2.0 mmol NH₃ to NH₄⁺, leaving 2.0 mmol NH₃ and 2.0 mmol NH₄⁺ in 60 mL. The ratio is 1, so pOH = pKb = 4.75 and pH = 14 − 4.75 = 9.25: partial neutralisation has made a basic buffer.
Solubility equilibria of sparingly soluble salts
A salt dissolves only if the energy released when its ions are solvated (always negative) can overcome its lattice enthalpy. Non-polar solvents solvate ions weakly, so salts do not dissolve in them. Very soluble salts such as calcium chloride even absorb moisture from the air; others, such as lithium fluoride, are called insoluble.
| Category | Description | Molar solubility |
|---|---|---|
| I | Soluble | More than 0.1 M |
| II | Slightly soluble | Between 0.01 M and 0.1 M |
| III | Sparingly soluble | Less than 0.01 M |
For a sparingly soluble salt in contact with its saturated solution, such as BaSO₄(s) ⇌ Ba²⁺(aq) + SO₄²⁻(aq), the solid's concentration is constant, so Ksp = [Ba²⁺][SO₄²⁻]: the solubility product. With Ksp = 1.1 × 10⁻¹⁰ at 298 K and molar solubility S, S² = 1.1 × 10⁻¹⁰ and S = 1.05 × 10⁻⁵ mol L⁻¹. For a general salt MₓXᵧ ⇌ xMᵖ⁺ + yX^q⁻: Ksp = (xS)ˣ(yS)ʸ = xˣ yʸ S^(x+y). For example, (Zr⁴⁺)₃(PO₄³⁻)₄ gives Ksp = (3S)³(4S)⁴ = 6912 S⁷.
Ksp = [Mᵖ⁺]ˣ[X^q⁻]ʸ = xˣ yʸ S^(x+y). A precipitate forms when the ionic product Qsp exceeds Ksp; the solid dissolves when Qsp < Ksp.
Worked example 4: solubility from Ksp
(a) AgCl, Ksp = 1.8 × 10⁻¹⁰: S = √(1.8 × 10⁻¹⁰) = 1.34 × 10⁻⁵ M. (b) A salt MX₂ with Ksp = 3.2 × 10⁻¹¹ (illustrative): Ksp = S(2S)² = 4S³, so S³ = 8.0 × 10⁻¹² and S = 2.0 × 10⁻⁴ M; then [M²⁺] = 2.0 × 10⁻⁴ M and [X⁻] = 4.0 × 10⁻⁴ M. Note that a larger Ksp does not always mean a larger solubility when the formulas differ: compare S, not Ksp.
Will a precipitate form?
- Find each ion's concentration after mixing (allow for dilution)
- Calculate Qsp with the Ksp expression
- Compare: Qsp > Ksp means precipitation; Qsp ≤ Ksp means none
Worked example 5: mixing two solutions
Equal volumes of 2.0 × 10⁻⁴ M AgNO₃ and 2.0 × 10⁻⁴ M NaCl are mixed. Each concentration halves: [Ag⁺] = [Cl⁻] = 1.0 × 10⁻⁴ M. Qsp = 1.0 × 10⁻⁸, which exceeds Ksp (1.8 × 10⁻¹⁰), so AgCl precipitates until Qsp falls to Ksp.
Common ion effect on solubility
Adding an ion that the salt already supplies raises Qsp above Ksp, so some salt precipitates: solubility falls. AgCl in 0.010 M NaCl: S = Ksp/[Cl⁻] = 1.8 × 10⁻¹⁰/0.010 = 1.8 × 10⁻⁸ M, about 750 times less than in pure water. Passing HCl gas into saturated brine precipitates very pure NaCl the same way, and the effect is used to precipitate ions almost completely (Ag⁺ as AgCl, Fe³⁺ as its hydroxide, Ba²⁺ as BaSO₄) in gravimetric analysis. Conversely, salts of weak acids such as phosphates become more soluble at lower pH, because H⁺ removes the anion as HX, so more solid dissolves to keep Qsp = Ksp.
Key takeaways
- A common ion suppresses the ionisation of a weak electrolyte and the solubility of a sparingly soluble salt.
- Salt of weak acid + strong base: basic; strong acid + weak base: acidic; weak + weak: pH = 7 + ½(pKa − pKb).
- Buffer: pH = pKa + log([salt]/[acid]); equal concentrations give pH = pKa; dilution does not change pH.
- Ksp = xˣ yʸ S^(x+y); a precipitate forms only when Qsp > Ksp.
Check your understanding
-
1. A buffer contains 0.10 M of a weak acid HA (pKa = 4.74) and 0.30 M of its sodium salt NaA. What is its pH? (log 3 = 0.477)
- 4.26
- 5.22
- 5.04
- 4.74
Show answer
Answer: B. pH = pKa + log([salt]/[acid]) = 4.74 + log(0.30/0.10) = 4.74 + 0.477 = 5.22. (4.26 comes from inverting the ratio.)
-
2. Which salt gives an acidic solution in water?
- NH₄Cl
- CH₃COONa
- NaCl
- KNO₃
Show answer
Answer: A. NH₄Cl is the salt of a strong acid (HCl) and a weak base; NH₄⁺ hydrolyses, NH₄⁺ + H₂O ⇌ NH₄OH + H⁺, so pH < 7. CH₃COONa is basic; NaCl and KNO₃ are neutral.
-
3. The molar solubility of a sparingly soluble salt M₂X is 1.0 × 10⁻⁴ mol L⁻¹. What is its Ksp?
- 1.0 × 10⁻⁸
- 2.0 × 10⁻¹²
- 4.0 × 10⁻¹²
- 1.0 × 10⁻¹²
Show answer
Answer: C. M₂X ⇌ 2M⁺ + X²⁻, so [M⁺] = 2S and [X²⁻] = S. Ksp = (2S)²(S) = 4S³ = 4 × (1.0 × 10⁻⁴)³ = 4.0 × 10⁻¹².
-
4. Assertion (A): Diluting an acetic acid-sodium acetate buffer tenfold with water lowers its pH by one unit. Reason (R): By the Henderson-Hasselbalch equation, the pH of such a buffer depends on the ratio [salt]/[acid].
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: D. A is false: dilution divides both concentrations by the same factor, so the ratio, and hence the pH, stays the same. R is true, and it is exactly why A is false.
-
5. Equal volumes of 1.0 × 10⁻⁵ M AgNO₃ and 1.0 × 10⁻⁵ M NaCl are mixed. Ksp of AgCl = 1.8 × 10⁻¹⁰. What happens?
- A precipitate forms, because Qsp is greater than Ksp
- No precipitate forms, because Qsp = 2.5 × 10⁻¹¹ is below Ksp
- A precipitate forms, because Qsp equals Ksp
- No precipitate forms, because Qsp = 1.0 × 10⁻¹⁰ is below Ksp
Show answer
Answer: B. After mixing, [Ag⁺] = [Cl⁻] = 5.0 × 10⁻⁶ M (each is halved). Qsp = (5.0 × 10⁻⁶)² = 2.5 × 10⁻¹¹, which is less than 1.8 × 10⁻¹⁰, so the solution is unsaturated and nothing precipitates.
Sign in to keep track of the lessons you finish.