- Foundation
- About 20 min
- 5 practice questions
Dynamic equilibrium in physical and chemical processes and the law of chemical equilibrium
Explain why equilibrium is dynamic, describe solid-liquid, liquid-vapour, solid-vapour and dissolution equilibria, apply Henry's law, and write and manipulate the equilibrium constant Kc for any balanced equation.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain what a dynamic equilibrium is and how it is reached from either direction.
- Describe the four common physical equilibria and the quantity that stays constant in each.
- Use Henry's law to relate the amount of a dissolved gas to its pressure.
- State the law of chemical equilibrium and write Kc for a balanced equation, its reverse and its multiples.
Oxygen binds to haemoglobin in the lungs and is released in the muscles because that binding is reversible; a similar equilibrium with carbon monoxide explains why CO is toxic. This lesson explains such balances, called equilibria, first for physical changes and then for chemical reactions.
What dynamic equilibrium means
Put some water in a closed container. Fast-moving molecules escape from the surface into the vapour, and some vapour molecules hit the surface and are captured again. At first evaporation wins, but as the vapour builds up, condensation speeds up. Soon the two rates are equal: the amount of liquid and the vapour pressure stop changing. The molecules are still moving across the surface in both directions, so the balance is dynamic, not static. We show this with the double half-arrow: H₂O(l) ⇌ H₂O(vap). The mixture present at this stage is the equilibrium mixture.
Reactions differ in how far they go before reaching equilibrium: nearly to completion, hardly at all, or to a mixture with comparable amounts of reactants and products. Conditions such as concentration and temperature change this extent.
Equilibria in physical processes
Common physical equilibria
-
Solid ⇌ liquid
- Ice and water in an insulated flask at 273 K and 1 atm
- Constant: the melting point at a given pressure
-
Liquid ⇌ vapour
- Water and its vapour in a closed vessel
- Constant: the vapour pressure at a given temperature
-
Solid ⇌ vapour
- Iodine, camphor or ammonium chloride subliming in a closed vessel
- Constant: the vapour pressure (seen as a steady colour for iodine)
-
Dissolution
- Sugar in its saturated solution; CO₂ dissolved under pressure
- Constant: the solubility at a given temperature (and pressure, for gases)
Solid-liquid. In a perfectly insulated flask at 273 K and atmospheric pressure, ice and water coexist with no change in their masses. Water molecules stick to the ice while ice molecules break away into the liquid, at equal rates. The temperature at which solid and liquid are in equilibrium at atmospheric pressure is the normal melting (freezing) point.
Liquid-vapour. Water placed in a dry, closed box fitted with a manometer evaporates a little; the pressure rises and then levels off at the equilibrium vapour pressure, which rises with temperature. A liquid with a higher vapour pressure at the same temperature is more volatile and boils lower. In an open dish the vapour spreads into the room, condensation never catches up and the liquid dries up: an open system cannot reach equilibrium. The temperature at which liquid and vapour are in equilibrium at 1.013 bar is the normal boiling point (100 °C for water); at high altitude the pressure is lower, so water boils below 100 °C.
Solid-vapour. Solid iodine in a closed flask fills it with violet vapour whose colour deepens and then stays constant: sublimation and deposition now go on at the same rate. Camphor and ammonium chloride behave in the same way.
Solids in liquids. A saturated solution holds the most solute it can at that temperature, and the dissolved and undissolved solute are in dynamic equilibrium: rate of dissolution = rate of crystallisation. If a few crystals of radioactive sugar are added to a saturated sugar solution, radioactivity soon appears in the solution and in the solid, although the amount dissolved does not change. That exchange proves the equilibrium is dynamic.
Gases in liquids. A soda bottle is sealed with CO₂ at high pressure. Once opened, the gas becomes less soluble and bubbles out until it reaches equilibrium with the tiny partial pressure of CO₂ in air, so the drink goes flat. Gases also dissolve less as temperature rises.
Henry's law: at a given temperature, the mass of a gas dissolved in a given mass of solvent is proportional to the pressure of the gas above the solvent.
Worked example 1: Henry's law
Suppose (illustrative figures) 1.5 g of CO₂ dissolves in 1 L of water at 25 °C when the CO₂ pressure is 1.0 bar. How much dissolves at 3.0 bar, and how much escapes if the pressure is then brought back to 1.0 bar at the same temperature?
Mass ∝ pressure, so m₂ = m₁ × (p₂/p₁) = 1.5 g × (3.0/1.0) = 4.5 g. When the pressure falls back to 1.0 bar, only 1.5 g can stay dissolved, so 4.5 − 1.5 = 3.0 g of CO₂ comes out as bubbles.
| Process | Example | Constant at a given temperature |
|---|---|---|
| Liquid ⇌ vapour | H₂O(l) ⇌ H₂O(g) | Vapour pressure of water |
| Solid ⇌ liquid | H₂O(s) ⇌ H₂O(l) | Melting point (at fixed pressure) |
| Solute(s) ⇌ solute(solution) | Sugar(s) ⇌ sugar(aq) | Concentration of the saturated solution |
| Gas(g) ⇌ gas(aq) | CO₂(g) ⇌ CO₂(aq) | Ratio [CO₂(aq)]/[CO₂(g)] |
Common features: a closed system at fixed temperature; opposing processes at the same rate; constant measurable properties; and one characteristic quantity (vapour pressure, melting point, solubility) whose value at any stage shows how far the process has gone.
Equilibrium in chemical reactions
For a reversible reaction A + B ⇌ C + D started with only A and B, the forward rate is high at first. As C and D build up, the forward rate falls and the reverse rate rises until they are equal; from then on the concentrations stay constant. The same equilibrium is reached if we start with only C and D. For H₂(g) + I₂(g) ⇌ 2HI(g), starting from H₂ and I₂ or from the same total number of H and I atoms as pure HI gives the same final mixture.
How a reaction reaches equilibrium
- Only reactants: forward rate high, reverse rate zero
- Products build up: forward rate falls, reverse rate rises
- Forward rate = reverse rate
- Concentrations constant; both reactions continue
Proof that chemical equilibrium is dynamic comes from isotopes. Two ammonia syntheses were run under identical conditions, one with H₂ and one with D₂ (deuterium). Both reached the same composition. When the two equilibrium mixtures were mixed, the total amount of ammonia did not change, yet a mass spectrometer soon found NH₃, NH₂D, NHD₂ and ND₃ as well as H₂, HD and D₂. The atoms could only have been scrambled if ammonia kept forming and decomposing after equilibrium was reached.
The law of chemical equilibrium
In 1864 Cato Guldberg and Peter Waage proposed that, at equilibrium, the concentrations of reactants and products are linked by a constant. Because concentration was then called 'active mass', this is also called the law of mass action. Experiments with H₂ + I₂ ⇌ 2HI showed that the ratio [HI]/([H₂][I₂]) varies from one experiment to another, but [HI]²/([H₂][I₂]) stays constant: the powers are the stoichiometric coefficients.
For aA + bB ⇌ cC + dD at a given temperature: Kc = [C]^c [D]^d / ([A]^a [B]^b), where every concentration is the equilibrium molar concentration (mol L⁻¹).
For example, for 2SO₂(g) + O₂(g) ⇌ 2SO₃(g), Kc = [SO₃]² / ([SO₂]²[O₂]). Because Kc depends on how the equation is written, always quote the equation with the value.
| Equation | Equilibrium constant |
|---|---|
| aA + bB ⇌ cC + dD | Kc |
| cC + dD ⇌ aA + bB (reversed) | K′c = 1/Kc |
| naA + nbB ⇌ ncC + ndD (multiplied by n) | Kc to the power n |
| Equation halved (n = ½) | √Kc |
Worked example 2: testing the two ratios
Made-up data for H₂ + I₂ ⇌ 2HI at one temperature. Mixture 1: [H₂] = 0.050 M, [I₂] = 0.020 M, [HI] = 0.240 M. Mixture 2: [H₂] = 0.020 M, [I₂] = 0.080 M, [HI] = 0.304 M.
Ratio [HI]/([H₂][I₂]): mixture 1 = 0.240/(0.050 × 0.020) = 0.240/0.0010 = 240; mixture 2 = 0.304/(0.020 × 0.080) = 0.304/0.0016 = 190. Not constant. Ratio [HI]²/([H₂][I₂]): mixture 1 = 0.0576/0.0010 = 57.6; mixture 2 = 0.0924/0.0016 = 57.8. Equal within experimental error, so Kc ≈ 57.7 and the squared form is the correct expression.
Worked example 3: Kc and related equations
At equilibrium for N₂(g) + 3H₂(g) ⇌ 2NH₃(g) (made-up data): [N₂] = 0.20 M, [H₂] = 0.50 M, [NH₃] = 0.10 M. Kc = [NH₃]²/([N₂][H₂]³) = (0.10)²/(0.20 × 0.50³) = 0.010/(0.20 × 0.125) = 0.010/0.025 = 0.40. For 2NH₃ ⇌ N₂ + 3H₂, K′c = 1/0.40 = 2.5. For ½N₂ + 3/2H₂ ⇌ NH₃, K″c = √0.40 = 0.63.
Key takeaways
- Equilibrium is dynamic: opposite processes continue at equal rates, so nothing measurable changes.
- It needs a closed system and can be approached from either side.
- Henry's law: dissolved mass of a gas ∝ its pressure; solubility of gases falls as temperature rises.
- Kc = product of [products] raised to their coefficients ÷ product of [reactants] raised to theirs.
- Reverse the equation → 1/Kc; multiply it by n → Kc to the power n.
Check your understanding
-
1. Water and its vapour are at equilibrium in a sealed flask at a fixed temperature. Which statement is correct?
- Evaporation has stopped completely.
- Condensation is faster than evaporation.
- The vapour pressure keeps rising slowly.
- Evaporation and condensation continue at equal rates.
Show answer
Answer: D. At equilibrium both processes continue (the equilibrium is dynamic) and their rates are equal, so the amount of liquid and the vapour pressure stay constant.
-
2. At a fixed temperature, 0.040 g of a gas dissolves in 100 g of water when its pressure is 1.2 bar. Using Henry's law, what mass dissolves in 100 g of water at 3.0 bar?
- 0.10 g
- 0.016 g
- 0.040 g
- 0.12 g
Show answer
Answer: A. Mass ∝ pressure: m = 0.040 g × (3.0/1.2) = 0.040 × 2.5 = 0.10 g.
-
3. Assertion (A): Water left in an open beaker evaporates completely instead of reaching equilibrium with its vapour. Reason (R): Equilibrium between a liquid and its vapour can be set up only in a closed system.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. In an open beaker the vapour spreads into the room, so condensation never catches up with evaporation; that is exactly why a closed system is needed. R explains A.
-
4. For H₂(g) + I₂(g) ⇌ 2HI(g), Kc = 64 at a certain temperature. What is Kc for HI(g) ⇌ ½H₂(g) + ½I₂(g) at the same temperature?
- 8
- 0.125
- 0.0156
- 64
Show answer
Answer: B. Reversing gives 1/64; halving the equation takes the square root: √(1/64) = 1/8 = 0.125.
-
5. At equilibrium for N₂(g) + 3H₂(g) ⇌ 2NH₃(g), [N₂] = 0.10 M, [H₂] = 0.20 M and [NH₃] = 0.040 M. What is Kc?
- 0.50
- 20
- 2.0
- 0.20
Show answer
Answer: C. Kc = [NH₃]²/([N₂][H₂]³) = (0.040)²/(0.10 × 0.20³) = 0.0016/(0.10 × 0.008) = 0.0016/0.0008 = 2.0.
Sign in to keep track of the lessons you finish.