• Foundation
  • About 22 min
  • 5 practice questions

Kp and Kc, homogeneous and heterogeneous equilibria, using K and the link with Gibbs energy

Relate Kp to Kc, write K for homogeneous and heterogeneous equilibria, use K to judge extent and Q to predict direction, calculate equilibrium concentrations, and connect K with ΔG°.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Derive and use Kp = Kc(RT)^Δn, with pressures in bar.
  • Write K for heterogeneous equilibria, leaving out pure solids and liquids, and state the units of K.
  • Use the size of K to judge extent and the reaction quotient Q to predict the direction of change.
  • Set up an initial-change-equilibrium table to find equilibrium concentrations, and use ΔG° = −RT ln K.

Knowing Kc is useful only if we can use it: to write it for gases in pressure units, to handle reactions involving solids, and to predict what a mixture will do. This lesson builds those tools and ends by linking K with the Gibbs energy you met in thermodynamics.

Homogeneous equilibria and Kp

In a homogeneous equilibrium all species are in one phase: all gases, as in N₂(g) + 3H₂(g) ⇌ 2NH₃(g), or all in one solution, as in the hydrolysis of ethyl acetate or Fe³⁺(aq) + SCN⁻(aq) ⇌ [Fe(SCN)]²⁺(aq). For gases it is convenient to use partial pressures and write Kp.

From pV = nRT, p = (n/V)RT = cRT, where c is in mol L⁻¹, p in bar and R = 0.0831 bar L mol⁻¹ K⁻¹. For aA + bB ⇌ cC + dD, replace each partial pressure by [X]RT: Kp = (p_C^c p_D^d)/(p_A^a p_B^b) = ([C]^c[D]^d/[A]^a[B]^b) × (RT)^((c+d) − (a+b)).

Kp = Kc(RT)^Δn, where Δn = (moles of gaseous products) − (moles of gaseous reactants) in the balanced equation. Use pressures in bar (1 bar = 10⁵ Pa) and R = 0.0831 bar L mol⁻¹ K⁻¹.

— Relation between Kp and Kc

If Δn = 0, as in H₂ + I₂ ⇌ 2HI, then Kp = Kc. For N₂ + 3H₂ ⇌ 2NH₃, Δn = 2 − 4 = −2, so Kp = Kc(RT)⁻².

Worked example 1: from Kc to Kp

For PCl₅(g) ⇌ PCl₃(g) + Cl₂(g), suppose Kc = 0.040 mol L⁻¹ at 500 K. Δn = 2 − 1 = 1. RT = 0.0831 × 500 = 41.55. Kp = 0.040 × 41.55 = 1.66 bar.

Heterogeneous equilibria

A heterogeneous equilibrium involves more than one phase, for example H₂O(l) ⇌ H₂O(g), or a solid with its saturated solution. The molar concentration of a pure solid or pure liquid is fixed, however much is present, so it is absorbed into the constant and left out of the expression. The solid or liquid must still be present for the equilibrium to exist.

For CaCO₃(s) ⇌ CaO(s) + CO₂(g), K′c = [CO₂] and Kp = p(CO₂): at a given temperature the CO₂ pressure over the two solids has one fixed value. Similarly, for Ni(s) + 4CO(g) ⇌ Ni(CO)₄(g), Kc = [Ni(CO)₄]/[CO]⁴, and for Ag₂O(s) + 2HNO₃(aq) ⇌ 2AgNO₃(aq) + H₂O(l), Kc = [AgNO₃]²/[HNO₃]².

Worked example 2: a heterogeneous equilibrium

Suppose CaCO₃ and CaO are in equilibrium with CO₂ at a pressure of 0.50 bar at 1000 K. Kp = p(CO₂)/(1 bar) = 0.50. Δn = +1, so Kc = Kp/(RT) = 0.50/(0.0831 × 1000) = 0.50/83.1 = 6.0 × 10⁻³ mol L⁻¹.

Units of K

Kc carries units of (mol L⁻¹)^Δn and Kp of bar^Δn, so K has no unit only when Δn = 0. If every concentration is divided by its standard state (1 mol L⁻¹ for solutes, 1 bar for gases), K becomes a pure number, but Kp and Kc still differ in value because the standard states differ.

Units of K for some reactions
ReactionΔn (gas)Unit of KcUnit of Kp
H₂(g) + I₂(g) ⇌ 2HI(g)0nonenone
N₂O₄(g) ⇌ 2NO₂(g)+1mol L⁻¹bar
N₂(g) + 3H₂(g) ⇌ 2NH₃(g)−2L² mol⁻²bar⁻²

Using K: extent and direction

K is valid only for equilibrium concentrations; it does not depend on the starting amounts; it has one value for a given balanced equation at a given temperature; and it says nothing about how fast equilibrium is reached. As a rough guide: if K > 10³ products dominate and the reaction is nearly complete; if K < 10⁻³ very little product forms; between these, both are present in appreciable amounts.

To predict direction, calculate the reaction quotient Qc with the same expression as Kc but using the concentrations at that moment.

Comparing Q with K

  • Q < K
    • Too little product
    • Net reaction goes forward (left to right)
  • Q = K
    • Mixture is at equilibrium
    • No net change
  • Q > K
    • Too much product
    • Net reaction goes backward (right to left)

Worked example 3: predicting direction

For H₂(g) + I₂(g) ⇌ 2HI(g), Kc = 57.0 at 700 K. A mixture has [H₂] = 0.20 M, [I₂] = 0.20 M, [HI] = 1.0 M. Qc = (1.0)²/(0.20 × 0.20) = 1.0/0.040 = 25. Since Qc < Kc, more HI forms (net forward reaction) until Qc = 57.0.

Calculating equilibrium concentrations

Write the balanced equation. Under it, tabulate initial concentrations, the change (in terms of x, using the coefficients) and equilibrium concentrations. Substitute into the K expression, solve for x (choosing the root that makes chemical sense), then calculate each concentration and check by substituting back.

Worked example 4: an ICE table

For CO(g) + H₂O(g) ⇌ CO₂(g) + H₂(g), suppose Kc = 4.0. Start with 0.20 M CO and 0.20 M H₂O. Initial: 0.20, 0.20, 0, 0. Change: −x, −x, +x, +x. Equilibrium: 0.20 − x, 0.20 − x, x, x.

Kc = x²/(0.20 − x)² = 4.0. Taking square roots: x/(0.20 − x) = 2.0, so x = 0.40 − 2x, 3x = 0.40, x = 0.133. Hence [CO₂] = [H₂] = 0.133 M and [CO] = [H₂O] = 0.20 − 0.133 = 0.067 M. Check: (0.133)²/(0.067)² ≈ 4.0.

K, Q and Gibbs energy

A reaction proceeds forward when ΔG is negative, backward when ΔG is positive, and is at equilibrium when ΔG = 0. The link is ΔG = ΔG° + RT ln Q. At equilibrium ΔG = 0 and Q = K, so ΔG° = −RT ln K, or K = e^(−ΔG°/RT).

ΔG° = −RT ln K = −2.303 RT log K. If ΔG° < 0 then K > 1 (products favoured); if ΔG° > 0 then K < 1 (reactants favoured).

— Equilibrium constant and standard Gibbs energy change

Worked example 5: from K to ΔG°

A reaction has K = 100 at 298 K. Using R = 8.314 J mol⁻¹ K⁻¹: 2.303RT = 2.303 × 8.314 × 298 = 5706 J mol⁻¹. ΔG° = −5706 × log 100 = −5706 × 2 = −11 412 J mol⁻¹ ≈ −11.4 kJ mol⁻¹. Conversely, a reaction with ΔG° = +5.71 kJ mol⁻¹ has log K = −5706/5706 = −1, so K = 0.10.

Key takeaways

  • Kp = Kc(RT)^Δn with R = 0.0831 bar L mol⁻¹ K⁻¹; Kp = Kc when Δn = 0.
  • Pure solids and liquids are left out of K but must be present.
  • Large K (> 10³) means nearly complete; small K (< 10⁻³) means hardly any product.
  • Q < K: forward; Q > K: backward; Q = K: at equilibrium.
  • ΔG° = −RT ln K links thermodynamics with the position of equilibrium.

Check your understanding

  1. 1. For 2SO₂(g) + O₂(g) ⇌ 2SO₃(g), how are Kp and Kc related?

    1. Kp = Kc
    2. Kp = Kc(RT)
    3. Kp = Kc(RT)²
    4. Kp = Kc(RT)⁻¹
    Show answer

    Answer: D. Δn = 2 − (2 + 1) = −1, so Kp = Kc(RT)^Δn = Kc(RT)⁻¹.

  2. 2. Which is the correct Kp expression for C(s) + CO₂(g) ⇌ 2CO(g)?

    1. p(CO)² / p(CO₂)
    2. p(CO)² / (p(CO₂) × p(C))
    3. 2p(CO) / p(CO₂)
    4. p(CO₂) / p(CO)²
    Show answer

    Answer: A. Carbon is a pure solid, so it is left out. CO has coefficient 2, so its pressure is squared: Kp = p(CO)²/p(CO₂).

  3. 3. For 2A(g) ⇌ B(g) + C(g), Kc = 0.25. At some moment [A] = 0.20 M, [B] = 0.10 M and [C] = 0.10 M. What will happen?

    1. Net forward reaction
    2. Net backward reaction
    3. No net change: the mixture is at equilibrium
    4. It cannot be predicted without the rate constant
    Show answer

    Answer: C. Qc = [B][C]/[A]² = (0.10 × 0.10)/(0.20)² = 0.010/0.040 = 0.25 = Kc, so the mixture is already at equilibrium.

  4. 4. A reaction has K = 1.0 × 10⁻² at 298 K. What is ΔG°? (Take 2.303RT = 5706 J mol⁻¹ at 298 K.)

    1. −11.4 kJ mol⁻¹
    2. +11.4 kJ mol⁻¹
    3. +5.7 kJ mol⁻¹
    4. 0 kJ mol⁻¹
    Show answer

    Answer: B. ΔG° = −2.303RT log K = −5706 × (−2) = +11 412 J mol⁻¹ ≈ +11.4 kJ mol⁻¹. A K below 1 always gives a positive ΔG°.

  5. 5. Assertion (A): For H₂(g) + I₂(g) ⇌ 2HI(g), Kp is numerically equal to Kc. Reason (R): For this reaction the number of moles of gaseous products equals the number of moles of gaseous reactants.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Δn = 2 − 2 = 0, so (RT)^0 = 1 and Kp = Kc. Both statements are true and R is the reason for A.

Privacy · Terms · Refunds · Delivery