• Foundation
  • About 22 min
  • 5 practice questions

Le Chatelier's principle, electrolytes and the Arrhenius, Brönsted-Lowry and Lewis concepts of acids and bases

Predict how concentration, pressure, inert gas, temperature and a catalyst affect an equilibrium, tell strong from weak electrolytes, and classify acids and bases by the Arrhenius, Brönsted-Lowry and Lewis concepts.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State Le Chatelier's principle and use it, together with Q and K, to predict the effect of a change.
  • Explain why temperature changes K but concentration, pressure and a catalyst do not.
  • Distinguish electrolytes from non-electrolytes and strong from weak electrolytes.
  • Classify acids and bases by the Arrhenius, Brönsted-Lowry and Lewis definitions and name conjugate pairs.

A chemical plant wants the most product for the least energy. Since K is fixed at a given temperature, the plant can only shift an equilibrium by changing conditions. This lesson shows how to predict such shifts, then opens the second half of the chapter: equilibria involving ions, starting with what acids and bases are.

Le Chatelier's principle

If a system at equilibrium is disturbed by a change in any factor that decides the equilibrium (concentration, pressure, temperature), the system shifts in the direction that reduces or counteracts the effect of the change.

— Le Chatelier's principle

Changing concentration

Adding a reactant or product drives net reaction in the direction that uses it up; removing one drives the reaction in the direction that replaces it. In terms of Q: adding H₂ to H₂ + I₂ ⇌ 2HI makes Qc smaller than Kc, so more HI forms. The new equilibrium [H₂] is lower than just after the addition but higher than before it. Continuous removal of a product keeps Q below K, so the reaction keeps going forward: ammonia is liquefied and removed in the Haber process, and CO₂ is swept out of a lime kiln so that CaCO₃ decomposes completely.

Colour shows this well. Fe³⁺(aq) (yellow) + SCN⁻(aq) (colourless) ⇌ [Fe(SCN)]²⁺(aq) (deep red). Adding more thiocyanate deepens the red. Oxalic acid ties up Fe³⁺ as [Fe(C₂O₄)₃]³⁻ and HgCl₂ ties up SCN⁻ as [Hg(SCN)₄]²⁻; either removes a reactant, so the complex dissociates and the red fades.

Worked example 1: adding a reactant

For H₂ + I₂ ⇌ 2HI, Kc = 57.0. An equilibrium mixture has [H₂] = [I₂] = 0.100 M and [HI] = 0.755 M (check: 0.570/0.0100 = 57.0). Enough H₂ is added to make [H₂] = 0.200 M at once. Qc = 0.570/(0.200 × 0.100) = 28.5 < 57.0, so the reaction goes forward. Let x react: (0.755 + 2x)²/((0.200 − x)(0.100 − x)) = 57.0, which gives 53x² − 20.12x + 0.570 = 0 and x = 0.031 (the other root, 0.349, would make [I₂] negative).

New equilibrium: [H₂] = 0.169 M, [I₂] = 0.069 M, [HI] = 0.817 M. As predicted, [H₂] settles between 0.100 and 0.200 M, and more HI has formed.

Changing pressure (by changing volume)

Pressure matters only for gaseous reactions in which the moles of gas change (Δn ≠ 0); solids and liquids are hardly affected and are ignored. Increasing the pressure shifts the equilibrium towards fewer moles of gas; decreasing it favours more moles of gas. In C(s) + CO₂(g) ⇌ 2CO(g), a rise in pressure therefore drives the reaction backward.

Worked example 2: compressing a gas mixture

For CO(g) + 3H₂(g) ⇌ CH₄(g) + H₂O(g) at equilibrium, the volume is halved at constant temperature. Every concentration doubles. Qc = (2[CH₄])(2[H₂O]) / ((2[CO])(2[H₂])³) = (4/16) × Kc = Kc/4. Since Qc < Kc, the reaction goes forward, towards 2 mol of gas instead of 4, just as the principle predicts.

Adding an inert gas

If argon is added at constant volume, the partial pressures and concentrations of the reacting gases do not change, so Q still equals K and the equilibrium is undisturbed.

Changing temperature

Concentration and pressure changes upset the equality of Q and K; a temperature change alters K itself. For an exothermic reaction (ΔH negative) K decreases as temperature rises; for an endothermic reaction (ΔH positive) K increases. For N₂ + 3H₂ ⇌ 2NH₃, ΔH = −92.38 kJ mol⁻¹, so heating lowers the equilibrium yield of ammonia.

For 2NO₂(g) (brown) ⇌ N₂O₄(g) (colourless), ΔH = −57.2 kJ mol⁻¹. A sealed tube of the gas becomes paler in a freezing mixture (forward, exothermic direction favoured) and darker brown in hot water. For the endothermic [Co(H₂O)₆]²⁺ (pink) + 4Cl⁻ ⇌ [CoCl₄]²⁻ (blue) + 6H₂O, the mixture is blue at room temperature and turns pink on cooling.

Adding a catalyst

A catalyst gives a new path of lower activation energy, lowering it by the same amount for the forward and reverse reactions. Equilibrium is reached sooner, but its composition and K are unchanged, and the catalyst does not appear in the K expression. In the Haber process low temperature favours yield but is too slow, so an iron catalyst is used at about 500 °C and 200 atm (high pressure also favours the 4 → 2 mole change). In the contact process, K for 2SO₂ + O₂ ⇌ 2SO₃ is very large but the reaction is slow, so platinum or V₂O₅ is used. A catalyst cannot help a reaction whose K is extremely small.

Summary of the factors
ChangeEffect on positionEffect on K
Add reactant / remove productShifts forwardNone
Increase pressure (Δn ≠ 0)Towards fewer moles of gasNone
Inert gas at constant volumeNo shiftNone
Raise temperatureShifts in the endothermic directionRises if endothermic, falls if exothermic
Add a catalystNo shift; equilibrium reached fasterNone

Ionic equilibrium and electrolytes

Faraday sorted substances by whether their aqueous solutions conduct electricity: electrolytes (such as common salt) do, non-electrolytes (such as sugar) do not. Strong electrolytes ionise almost completely (NaCl solution contains only Na⁺ and Cl⁻ ions); weak electrolytes ionise only partly (acetic acid, under 5 %), so ions and un-ionised molecules are in equilibrium. Such an equilibrium is an ionic equilibrium. Water's high dielectric constant (about 80) weakens the attraction between ions about 80-fold, and hydration keeps them apart. We will use 'ionisation' and 'dissociation' to mean the same thing.

Three ideas of acids and bases

Acids taste sour (Latin acidus, sour), turn blue litmus red and release hydrogen with some metals: HCl in gastric juice, acetic acid in vinegar, citric and ascorbic acids in citrus fruit, tartaric acid in tamarind. Bases taste bitter, feel soapy and turn red litmus blue. Acids and bases react to form salts such as NaCl.

Three definitions of acids and bases

  • Arrhenius
    • Acid gives H⁺ (as H₃O⁺) in water
    • Base gives OH⁻ in water
    • Limited to water; cannot explain NH₃ as a base
  • Brönsted-Lowry
    • Acid = proton donor
    • Base = proton acceptor
    • Acid and base differing by one proton form a conjugate pair
  • Lewis
    • Acid = electron-pair acceptor
    • Base = electron-pair donor
    • Covers acids with no proton, e.g. BF₃, AlCl₃, Mg²⁺

A bare proton is tiny and highly reactive, so in water it attaches to a water molecule as the pyramidal hydronium ion, H₃O⁺; we write H⁺(aq) and H₃O⁺(aq) for the same thing. In NH₃ + H₂O ⇌ NH₄⁺ + OH⁻, water donates a proton (acid) and ammonia accepts it (base); NH₄⁺ is the conjugate acid of NH₃ and OH⁻ is the conjugate base of H₂O. With HCl, water acts as a base and becomes H₃O⁺. Water can therefore act as either an acid or a base. A strong acid has a weak conjugate base, and vice versa. In Lewis terms, BF₃ + :NH₃ → BF₃:NH₃: the electron-deficient BF₃ accepts the lone pair of NH₃.

Worked example 3: naming conjugate pairs

In HSO₄⁻ + NH₃ ⇌ SO₄²⁻ + NH₄⁺: HSO₄⁻ gives a proton, so it is the acid and SO₄²⁻ is its conjugate base. NH₃ takes the proton, so it is the base and NH₄⁺ is its conjugate acid. Pairs: HSO₄⁻/SO₄²⁻ and NH₄⁺/NH₃. Each conjugate acid has exactly one more proton than its base.

Key takeaways

  • An equilibrium shifts to oppose the change imposed on it.
  • Only temperature changes K; a catalyst changes only the time taken to reach equilibrium.
  • Strong electrolytes ionise completely; weak electrolytes set up an ionic equilibrium.
  • Arrhenius: H⁺/OH⁻ in water; Brönsted-Lowry: proton donor/acceptor; Lewis: electron-pair acceptor/donor.

Check your understanding

  1. 1. For N₂(g) + 3H₂(g) ⇌ 2NH₃(g), ΔH is negative. Which change increases the equilibrium yield of ammonia?

    1. Raising the temperature
    2. Adding an iron catalyst
    3. Increasing the pressure
    4. Adding argon at constant volume
    Show answer

    Answer: C. 4 mol of gas become 2 mol, so higher pressure shifts the equilibrium forward. Heating favours the endothermic (backward) direction, a catalyst does not shift equilibrium, and argon at constant volume changes no partial pressure.

  2. 2. An equilibrium mixture for CO(g) + 3H₂(g) ⇌ CH₄(g) + H₂O(g) is compressed to one-third of its volume at constant temperature. What is Qc just after compression?

    1. 9Kc
    2. Kc/9
    3. Kc/3
    4. Kc
    Show answer

    Answer: B. Each concentration triples. Qc = (3 × 3)/(3 × 3³) × Kc = 9/81 × Kc = Kc/9. Since Qc < Kc, the reaction then moves forward.

  3. 3. Assertion (A): Adding a catalyst does not change the composition of an equilibrium mixture. Reason (R): A catalyst lowers the activation energy of the forward and the reverse reactions by the same amount.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Because both rates increase by the same factor, equilibrium is reached faster but at the same position; R explains A.

  4. 4. What is the conjugate base of H₂PO₄⁻?

    1. H₃PO₄
    2. PO₄³⁻
    3. HPO₄²⁻
    4. OH⁻
    Show answer

    Answer: C. A conjugate base has one proton fewer: H₂PO₄⁻ − H⁺ = HPO₄²⁻. H₃PO₄ is its conjugate acid.

  5. 5. Which species acts as a Lewis acid but is not a Brönsted-Lowry acid?

    1. NH₄⁺
    2. H₂O
    3. HCl
    4. AlCl₃
    Show answer

    Answer: D. AlCl₃ has no proton to donate, but its aluminium atom is electron-deficient and accepts an electron pair, so it is a Lewis acid only. NH₄⁺, H₂O and HCl can all donate a proton.

Privacy · Terms · Refunds · Delivery