Revision notes

Chapter 6 Equilibrium: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Dynamic equilibrium in physical and chemical processes and the law of chemical equilibrium

Common physical equilibria

  • Solid ⇌ liquid
    • Ice and water in an insulated flask at 273 K and 1 atm
    • Constant: the melting point at a given pressure
  • Liquid ⇌ vapour
    • Water and its vapour in a closed vessel
    • Constant: the vapour pressure at a given temperature
  • Solid ⇌ vapour
    • Iodine, camphor or ammonium chloride subliming in a closed vessel
    • Constant: the vapour pressure (seen as a steady colour for iodine)
  • Dissolution
    • Sugar in its saturated solution; CO₂ dissolved under pressure
    • Constant: the solubility at a given temperature (and pressure, for gases)
In each case two opposite changes go on at equal rates.

Henry's law: at a given temperature, the mass of a gas dissolved in a given mass of solvent is proportional to the pressure of the gas above the solvent.

— Equilibrium of gases in liquids
Features of physical equilibria
ProcessExampleConstant at a given temperature
Liquid ⇌ vapourH₂O(l) ⇌ H₂O(g)Vapour pressure of water
Solid ⇌ liquidH₂O(s) ⇌ H₂O(l)Melting point (at fixed pressure)
Solute(s) ⇌ solute(solution)Sugar(s) ⇌ sugar(aq)Concentration of the saturated solution
Gas(g) ⇌ gas(aq)CO₂(g) ⇌ CO₂(aq)Ratio [CO₂(aq)]/[CO₂(g)]

How a reaction reaches equilibrium

  1. Only reactants: forward rate high, reverse rate zero
  2. Products build up: forward rate falls, reverse rate rises
  3. Forward rate = reverse rate
  4. Concentrations constant; both reactions continue

For aA + bB ⇌ cC + dD at a given temperature: Kc = [C]^c [D]^d / ([A]^a [B]^b), where every concentration is the equilibrium molar concentration (mol L⁻¹).

— Law of chemical equilibrium
How Kc changes when the equation is rewritten
EquationEquilibrium constant
aA + bB ⇌ cC + dDKc
cC + dD ⇌ aA + bB (reversed)K′c = 1/Kc
naA + nbB ⇌ ncC + ndD (multiplied by n)Kc to the power n
Equation halved (n = ½)√Kc
  • Equilibrium is dynamic: opposite processes continue at equal rates, so nothing measurable changes.
  • It needs a closed system and can be approached from either side.
  • Henry's law: dissolved mass of a gas ∝ its pressure; solubility of gases falls as temperature rises.
  • Kc = product of [products] raised to their coefficients ÷ product of [reactants] raised to theirs.
  • Reverse the equation → 1/Kc; multiply it by n → Kc to the power n.
Read the full lesson

Lesson 2

Kp and Kc, homogeneous and heterogeneous equilibria, using K and the link with Gibbs energy

Kp = Kc(RT)^Δn, where Δn = (moles of gaseous products) − (moles of gaseous reactants) in the balanced equation. Use pressures in bar (1 bar = 10⁵ Pa) and R = 0.0831 bar L mol⁻¹ K⁻¹.

— Relation between Kp and Kc
Units of K for some reactions
ReactionΔn (gas)Unit of KcUnit of Kp
H₂(g) + I₂(g) ⇌ 2HI(g)0nonenone
N₂O₄(g) ⇌ 2NO₂(g)+1mol L⁻¹bar
N₂(g) + 3H₂(g) ⇌ 2NH₃(g)−2L² mol⁻²bar⁻²

Comparing Q with K

  • Q < K
    • Too little product
    • Net reaction goes forward (left to right)
  • Q = K
    • Mixture is at equilibrium
    • No net change
  • Q > K
    • Too much product
    • Net reaction goes backward (right to left)

ΔG° = −RT ln K = −2.303 RT log K. If ΔG° < 0 then K > 1 (products favoured); if ΔG° > 0 then K < 1 (reactants favoured).

— Equilibrium constant and standard Gibbs energy change
  • Kp = Kc(RT)^Δn with R = 0.0831 bar L mol⁻¹ K⁻¹; Kp = Kc when Δn = 0.
  • Pure solids and liquids are left out of K but must be present.
  • Large K (> 10³) means nearly complete; small K (< 10⁻³) means hardly any product.
  • Q < K: forward; Q > K: backward; Q = K: at equilibrium.
  • ΔG° = −RT ln K links thermodynamics with the position of equilibrium.
Read the full lesson

Lesson 3

Le Chatelier's principle, electrolytes and the Arrhenius, Brönsted-Lowry and Lewis concepts of acids and bases

If a system at equilibrium is disturbed by a change in any factor that decides the equilibrium (concentration, pressure, temperature), the system shifts in the direction that reduces or counteracts the effect of the change.

— Le Chatelier's principle
Summary of the factors
ChangeEffect on positionEffect on K
Add reactant / remove productShifts forwardNone
Increase pressure (Δn ≠ 0)Towards fewer moles of gasNone
Inert gas at constant volumeNo shiftNone
Raise temperatureShifts in the endothermic directionRises if endothermic, falls if exothermic
Add a catalystNo shift; equilibrium reached fasterNone

Three definitions of acids and bases

  • Arrhenius
    • Acid gives H⁺ (as H₃O⁺) in water
    • Base gives OH⁻ in water
    • Limited to water; cannot explain NH₃ as a base
  • Brönsted-Lowry
    • Acid = proton donor
    • Base = proton acceptor
    • Acid and base differing by one proton form a conjugate pair
  • Lewis
    • Acid = electron-pair acceptor
    • Base = electron-pair donor
    • Covers acids with no proton, e.g. BF₃, AlCl₃, Mg²⁺
  • An equilibrium shifts to oppose the change imposed on it.
  • Only temperature changes K; a catalyst changes only the time taken to reach equilibrium.
  • Strong electrolytes ionise completely; weak electrolytes set up an ionic equilibrium.
  • Arrhenius: H⁺/OH⁻ in water; Brönsted-Lowry: proton donor/acceptor; Lewis: electron-pair acceptor/donor.
Read the full lesson

Lesson 4

Ionization of water, the pH scale and ionization constants of weak acids and bases

Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴ at 298 K. pH = −log[H⁺]; pOH = −log[OH⁻]; pH + pOH = pKw = 14 at 298 K.

— Ionic product of water and the pH scale
Hydrogen ion concentration and pH at 298 K
[H⁺] / mol L⁻¹[OH⁻] / mol L⁻¹pHNature
1.0 × 10⁻²1.0 × 10⁻¹²2Acidic
1.0 × 10⁻⁷1.0 × 10⁻⁷7Neutral
1.0 × 10⁻¹⁰1.0 × 10⁻⁴10Basic

Finding the pH of a weak acid

  1. Identify the acid and compare Ka with Kw to find the main reaction
  2. Tabulate initial, change and equilibrium concentrations in terms of α or x
  3. Substitute into Ka and solve (approximate if α is small)
  4. Work out [H⁺] and pH = −log[H⁺]
  • Kw = 1.0 × 10⁻¹⁴ at 298 K; pH + pOH = 14; one pH unit = tenfold change in [H⁺].
  • Weak acid: Ka ≈ cα², α = √(Ka/c), [H⁺] = √(Ka·c); dilution increases α.
  • Ka × Kb = Kw for a conjugate pair, so pKa + pKb = 14.
  • Ka1 > Ka2 > Ka3; acid strength rises down a group (bond strength) and across a period (electronegativity).
Read the full lesson

Lesson 5

Common ion effect, hydrolysis of salts, buffer solutions and the solubility product

pH of salt solutions

  • Strong acid + strong base
    • e.g. NaCl, KNO₃
    • No hydrolysis: neutral, pH = 7
  • Weak acid + strong base
    • e.g. CH₃COONa
    • CH₃COO⁻ + H₂O ⇌ CH₃COOH + OH⁻
    • Basic, pH > 7
  • Strong acid + weak base
    • e.g. NH₄Cl
    • NH₄⁺ + H₂O ⇌ NH₄OH + H⁺
    • Acidic, pH < 7
  • Weak acid + weak base
    • e.g. CH₃COONH₄
    • Both ions hydrolyse
    • pH = 7 + ½(pKa − pKb)

Henderson-Hasselbalch equation: pH = pKa + log([salt]/[acid]) for an acidic buffer; pOH = pKb + log([conjugate acid]/[base]), or pH = pKa(BH⁺) + log([base]/[conjugate acid]), for a basic buffer.

— Buffer pH
Classes of salts by solubility
CategoryDescriptionMolar solubility
ISolubleMore than 0.1 M
IISlightly solubleBetween 0.01 M and 0.1 M
IIISparingly solubleLess than 0.01 M

Ksp = [Mᵖ⁺]ˣ[X^q⁻]ʸ = xˣ yʸ S^(x+y). A precipitate forms when the ionic product Qsp exceeds Ksp; the solid dissolves when Qsp < Ksp.

— Solubility product

Will a precipitate form?

  1. Find each ion's concentration after mixing (allow for dilution)
  2. Calculate Qsp with the Ksp expression
  3. Compare: Qsp > Ksp means precipitation; Qsp ≤ Ksp means none
  • A common ion suppresses the ionisation of a weak electrolyte and the solubility of a sparingly soluble salt.
  • Salt of weak acid + strong base: basic; strong acid + weak base: acidic; weak + weak: pH = 7 + ½(pKa − pKb).
  • Buffer: pH = pKa + log([salt]/[acid]); equal concentrations give pH = pKa; dilution does not change pH.
  • Ksp = xˣ yʸ S^(x+y); a precipitate forms only when Qsp > Ksp.
Read the full lesson

Privacy · Terms · Refunds · Delivery