• Foundation
  • About 30 min
  • 15 practice questions

Final self-assessment: Organic Chemistry - Some Basic Principles and Techniques

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Try all 15 questions in one sitting of about 30 minutes, with a pencil and paper for the numericals, before reading any explanation. Then check each answer and its working. Values used: C = 12, H = 1, N = 14, O = 16, Cl = 35.5, Br = 80, S = 32, Ag = 108, Ba = 137; one mole of gas occupies 22400 mL at STP.

Final self-assessment

  1. 1. What is the hybridisation of carbons 1, 2, 3 and 4 in buta-1,2-diene, CH₂=C=CH–CH₃?

    1. sp², sp², sp², sp³
    2. sp², sp, sp², sp³
    3. sp, sp, sp², sp³
    4. sp², sp, sp, sp³
    Show answer

    Answer: B. C1 is bonded to three atoms (2 H and C2): sp². C2 has two double bonds and two partners: sp. C3 is bonded to three atoms: sp². C4 (CH₃) has four partners: sp³.

  2. 2. How many σ and π bonds does a benzene molecule, C₆H₆, contain?

    1. 6 σ and 3 π
    2. 9 σ and 3 π
    3. 12 σ and 6 π
    4. 12 σ and 3 π
    Show answer

    Answer: D. Six C–C links each contain one σ bond and six C–H bonds are σ bonds: 12 σ. In one Kekulé structure three of the C–C links are double, adding 3 π.

  3. 3. What is the molar mass of the fourth member of the alkyne series that begins with ethyne?

    1. 68 g mol⁻¹
    2. 54 g mol⁻¹
    3. 82 g mol⁻¹
    4. 70 g mol⁻¹
    Show answer

    Answer: A. Alkynes are CₙH₂ₙ₋₂: C₂H₂, C₃H₄, C₄H₆, C₅H₈. C₅H₈ = 5 × 12 + 8 × 1 = 68 g mol⁻¹. 54 is the third member and 70 belongs to C₅H₁₀.

  4. 4. What is the IUPAC name of CH₃CH(CH₃)CH₂CH(CH₂CH₃)CH₂CH₂CH₃?

    1. 4-Ethyl-6-methylheptane
    2. 2-Methyl-4-ethylheptane
    3. 4-Ethyl-2-methylheptane
    4. 2-Methyl-4-propylhexane
    Show answer

    Answer: C. The longest chain has 7 carbons (heptane). Numbering from the left gives locants {2, 4}, from the right {4, 6}, so number from the left. Alphabetical order puts ethyl before methyl: 4-ethyl-2-methylheptane. A propylhexane name uses a shorter chain.

  5. 5. What is the IUPAC name of OHC–CH₂–CH₂–COOH?

    1. 4-Carboxybutanal
    2. 4-Oxobutanoic acid
    3. 3-Formylpropanoic acid
    4. 1-Oxobutan-4-oic acid
    Show answer

    Answer: B. The carboxylic acid outranks the aldehyde, so it is the suffix and its carbon is C1. The chain has four carbons including the CHO carbon (C4), which is named oxo: 4-oxobutanoic acid.

  6. 6. Butanal (CH₃CH₂CH₂CHO) and butanone (CH₃COCH₂CH₃) are related as:

    1. chain isomers
    2. position isomers
    3. metamers
    4. functional group isomers
    Show answer

    Answer: D. Both are C₄H₈O, but one is an aldehyde and the other a ketone: different functional groups, so functional group isomers.

  7. 7. Which order of carbocation stability is correct?

    1. CH₃⁺ > CH₃CH₂⁺ > (CH₃)₂CH⁺ > (CH₃)₃C⁺
    2. (CH₃)₃C⁺ > (CH₃)₂CH⁺ > CH₃CH₂⁺ > CH₃⁺
    3. (CH₃)₂CH⁺ > (CH₃)₃C⁺ > CH₃CH₂⁺ > CH₃⁺
    4. CH₃CH₂⁺ > CH₃⁺ > (CH₃)₂CH⁺ > (CH₃)₃C⁺
    Show answer

    Answer: B. More alkyl groups on the positive carbon mean more hyperconjugation (9, 6, 3 and 0 C–H bonds) and more +I donation, so 3° > 2° > 1° > methyl.

  8. 8. Assertion (A): The electromeric effect is a permanent effect present in every molecule that has a multiple bond. Reason (R): The electromeric effect is the complete transfer of a shared π-electron pair to one atom of a multiple bond when an attacking reagent approaches.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: D. A is false: the electromeric effect is temporary and appears only while a reagent is present, vanishing when it is removed. R is a correct description of the effect.

  9. 9. When H⁺ adds to propene, the π electrons of the C=C bond shift to the carbon to which H⁺ becomes attached. This is an example of:

    1. the +E (positive electromeric) effect
    2. the –E (negative electromeric) effect
    3. the inductive effect
    4. hyperconjugation
    Show answer

    Answer: A. In the +E effect the π pair moves to the atom the attacking reagent attaches to. In –E it moves to the atom the reagent does not attach to, as when CN⁻ adds to a carbonyl carbon.

  10. 10. On a TLC plate the solvent front is 12.0 cm from the base line. Spot P is at 3.0 cm and spot Q at 9.0 cm. Which statement is correct?

    1. Rf(P) = 0.75 and P is less strongly adsorbed
    2. Rf(Q) = 0.25 and Q is more strongly adsorbed
    3. Rf(P) = 0.25 and P is more strongly adsorbed
    4. Rf(P) = 4.0 and Rf(Q) = 1.33
    Show answer

    Answer: C. Rf(P) = 3.0 ÷ 12.0 = 0.25 and Rf(Q) = 9.0 ÷ 12.0 = 0.75. The component held more strongly by the adsorbent moves less, so P (lower Rf) is more strongly adsorbed. Rf cannot exceed 1.

  11. 11. Two miscible liquids have boiling points that differ by only about 5 K. Which method separates them?

    1. Fractional distillation
    2. Simple distillation
    3. Steam distillation
    4. Sublimation
    Show answer

    Answer: A. Close boiling points mean both vaporise in the same temperature range, so simple distillation fails; the repeated vaporisation and condensation in a fractionating column is needed. Steam distillation needs a water-immiscible, steam-volatile compound.

  12. 12. Assertion (A): The sodium fusion extract is acidified with acetic acid, not sulphuric acid, before lead acetate is added in the test for sulphur. Reason (R): Lead sulphide is a black solid.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: B. Both are true, but R does not explain A. Acetic acid is used because sulphuric acid would precipitate white lead sulphate with lead acetate and confuse the test; the colour of PbS is not the reason.

  13. 13. In a Dumas estimation, 0.25 g of a compound gives 45.0 mL of moist nitrogen at 293 K and 757.5 mm Hg. Taking the aqueous tension at 293 K as 17.5 mm Hg, what is the percentage of nitrogen?

    1. 10.2%
    2. 21.9%
    3. 16.3%
    4. 20.4%
    Show answer

    Answer: D. Dry N₂ pressure = 757.5 − 17.5 = 740 mm Hg. Volume at STP = 45.0 × (740/760) × (273/293) = 40.8 mL. Mass of N₂ = 28 × 40.8 ÷ 22400 = 0.0510 g. % N = 0.0510 ÷ 0.25 × 100 = 20.4%. Skipping the temperature correction gives 21.9%.

  14. 14. The ammonia from 0.30 g of urea is absorbed in 40.0 mL of 0.25 M H₂SO₄. The remaining acid needs 50.0 mL of 0.20 M NaOH. What percentage of nitrogen does this give?

    1. 23.3%
    2. 46.7%
    3. 93.3%
    4. 35.0%
    Show answer

    Answer: B. Acid taken = 0.0100 mol. NaOH = 0.0100 mol, which neutralises 0.0050 mol H₂SO₄. Acid used by NH₃ = 0.0050 mol, so NH₃ = 0.0100 mol and N = 0.140 g. % N = 0.140 ÷ 0.30 × 100 = 46.7%, matching urea's formula CH₄N₂O (28/60 × 100).

  15. 15. 0.300 g of a compound containing only C, H and O gives 0.440 g of CO₂ and 0.180 g of H₂O on combustion. What is its empirical formula?

    1. CHO
    2. C₂H₄O
    3. CH₂O
    4. CH₂O₂
    Show answer

    Answer: C. C = 12/44 × 0.440 = 0.120 g (0.010 mol). H = 2/18 × 0.180 = 0.020 g (0.020 mol). O = 0.300 − 0.120 − 0.020 = 0.160 g (0.010 mol). Ratio C : H : O = 1 : 2 : 1, so CH₂O.

Which lesson to revisit: Questions 1-3: lesson 1 (hybridisation, σ and π bonds, homologous series). Questions 4-6: lesson 2 (IUPAC nomenclature and isomerism). Questions 7-9: lesson 3 (reaction mechanism and electron displacement effects). Questions 10-12: lesson 4 (purification methods and Lassaigne's test). Questions 13-15: lesson 5 (quantitative analysis).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery