• Foundation
  • About 25 min
  • 5 practice questions

Quantitative analysis: estimating carbon, hydrogen, nitrogen, halogens, sulphur, phosphorus and oxygen

Calculate the mass per cent of C and H by combustion, N by the Dumas and Kjeldahl methods, halogens and sulphur by the Carius method, phosphorus and oxygen, and use the results to find an empirical formula.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain how C and H are estimated by combustion and calculate their percentages.
  • Calculate % nitrogen by the Dumas method (with pressure and temperature corrections) and by Kjeldahl's method.
  • Calculate % halogen and % sulphur by the Carius method, and % phosphorus.
  • Find % oxygen by difference or by the direct method, and turn percentages into an empirical formula.

Once a compound is pure and its elements are known, the next question is how much of each it contains. Mass per cent of each element leads to the empirical formula and, with the molar mass, the molecular formula, as you learnt in the first unit of this book. Values used throughout: C = 12, H = 1, N = 14, O = 16, Cl = 35.5, Br = 80, S = 32, Ag = 108, Ba = 137 (g mol⁻¹), and 22400 mL as the volume of one mole of gas at STP (273 K, 760 mm Hg).

Carbon and hydrogen

A weighed sample (m g) is burnt in excess oxygen over copper(II) oxide: CₓHᵧ + (x + y/4) O₂ → x CO₂ + (y/2) H₂O. The gases pass first through a weighed U-tube of anhydrous calcium chloride, which absorbs the water, and then through a U-tube of concentrated potassium hydroxide solution, which absorbs the CO₂ (an acidic gas reacting with the alkali). The gains in mass give the masses of water (m₁) and CO₂ (m₂). Since 44 g of CO₂ contains 12 g of C and 18 g of H₂O contains 2 g of H:

% C = (12 × m₂ × 100) ÷ (44 × m); % H = (2 × m₁ × 100) ÷ (18 × m)

Worked example 1: combustion data to empirical formula

0.230 g of a compound of C, H and O gives 0.440 g CO₂ and 0.270 g H₂O. Carbon: 12/44 × 0.440 = 0.120 g, so % C = 0.120 ÷ 0.230 × 100 = 52.2%. Hydrogen: 2/18 × 0.270 = 0.030 g, so % H = 13.0%. Oxygen by difference: 0.230 − 0.120 − 0.030 = 0.080 g, so % O = 34.8%. Moles: C 0.120/12 = 0.010; H 0.030/1 = 0.030; O 0.080/16 = 0.005. Dividing by 0.005 gives 2 : 6 : 1, so the empirical formula is C₂H₆O.

Nitrogen: the Dumas method

The compound is heated with copper(II) oxide in an atmosphere of CO₂: CₓHᵧN_z + (2x + y/2) CuO → x CO₂ + (y/2) H₂O + (z/2) N₂ + (2x + y/2) Cu. Any oxides of nitrogen are reduced to N₂ over heated copper gauze. The gases are collected over potassium hydroxide solution, which absorbs CO₂, so only N₂ remains in the graduated tube. The gas is moist, so its own pressure is p₁ = atmospheric pressure − aqueous tension. With V₁ mL collected at T₁ K:

Volume at STP, V = (p₁ × V₁ × 273) ÷ (760 × T₁); % N = (28 × V × 100) ÷ (22400 × m)

Worked example 2: Dumas method

0.200 g of a compound gives 30.0 mL of moist N₂ at 290 K and 754.5 mm Hg; take the aqueous tension at 290 K as 14.5 mm Hg. Pressure of dry N₂: 754.5 − 14.5 = 740 mm Hg. Volume at STP: 30.0 × (740/760) × (273/290) = 30.0 × 0.9737 × 0.9414 = 27.5 mL. Mass of N₂: 28 × 27.5 ÷ 22400 = 0.0344 g. % N = 0.0344 ÷ 0.200 × 100 = 17.2%.

Nitrogen: Kjeldahl's method

The compound is heated with concentrated sulphuric acid, which turns its nitrogen into ammonium sulphate. The mixture is heated with excess sodium hydroxide, and the ammonia released is absorbed in a known, excess volume (V mL) of standard sulphuric acid of molarity M: 2NH₃ + H₂SO₄ → (NH₄)₂SO₄. The acid left over is titrated with standard NaOH (V₁ mL of molarity M), which uses V₁/2 mL of the acid. So the acid that reacted with ammonia is (V − V₁/2) mL, equivalent to 2(V − V₁/2) mL of M ammonia; 1000 mL of 1 M ammonia contains 14 g of N. The method fails for nitrogen in nitro and azo groups and in rings (such as pyridine), because that nitrogen is not converted to ammonium sulphate.

% N (Kjeldahl) = (1.4 × M × 2(V − V₁/2)) ÷ m, where M is the molarity of the acid, V its volume taken, V₁ the volume of alkali of the same molarity used, and m the sample mass in g.

Worked example 3: Kjeldahl's method

The ammonia from 0.35 g of a compound is absorbed in 50.0 mL of 0.50 M H₂SO₄. The leftover acid needs 80.0 mL of 0.50 M NaOH. Acid taken: 50.0 × 0.50/1000 = 0.025 mol. NaOH used: 0.040 mol, which neutralises 0.020 mol H₂SO₄. Acid used by ammonia: 0.025 − 0.020 = 0.005 mol, so NH₃ = 2 × 0.005 = 0.010 mol and N = 0.010 × 14 = 0.14 g. % N = 0.14 ÷ 0.35 × 100 = 40.0%. Check with the formula: 1.4 × 0.50 × 2(50 − 40) ÷ 0.35 = 14 ÷ 0.35 = 40.0%.

Halogens and sulphur: the Carius method

Halogens. A weighed compound is heated with fuming nitric acid and silver nitrate in a sealed hard-glass Carius tube in a furnace. C and H are oxidised to CO₂ and H₂O, and the halogen forms silver halide (AgX), which is filtered, washed, dried and weighed (m₁ g). One mole of AgX contains one mole of X, so % X = (atomic mass of X × m₁ × 100) ÷ (molar mass of AgX × m). Sulphur. The compound is heated in a Carius tube with sodium peroxide or fuming nitric acid; sulphur becomes sulphuric acid, precipitated as BaSO₄ with barium chloride, and weighed. BaSO₄ = 137 + 32 + 64 = 233 g mol⁻¹, so % S = (32 × m₁ × 100) ÷ (233 × m).

Worked example 4: halogen and sulphur percentages

(a) 0.200 g of a chloro compound gives 0.287 g AgCl (108 + 35.5 = 143.5 g mol⁻¹). Cl = 35.5/143.5 × 0.287 = 0.0710 g, so % Cl = 35.5%. (b) 0.250 g of a bromo compound gives 0.376 g AgBr (188 g mol⁻¹). Br = 80/188 × 0.376 = 0.160 g, so % Br = 64.0%. (c) 0.300 g of a sulphur compound gives 0.466 g BaSO₄. S = 32/233 × 0.466 = 0.064 g, so % S = 21.3%.

Phosphorus and oxygen

Phosphorus. Heating with fuming nitric acid oxidises P to phosphoric acid. This is precipitated either as ammonium phosphomolybdate, (NH₄)₃PO₄·12MoO₃ (molar mass 1877 g mol⁻¹, containing 31 g P), so % P = (31 × m₁ × 100) ÷ (1877 × m); or with magnesia mixture as MgNH₄PO₄, which on ignition gives Mg₂P₂O₇ (222 g mol⁻¹, containing 62 g P), so % P = (62 × m₁ × 100) ÷ (222 × m). For example, 0.200 g of compound giving 0.111 g Mg₂P₂O₇ has P = 62/222 × 0.111 = 0.031 g, that is 15.5%.

Oxygen is usually found by difference: % O = 100 − (sum of all other percentages). It can also be estimated directly. The compound is decomposed by heating in nitrogen, and the gases are passed over red-hot coke (1373 K), turning all the oxygen into CO: 2C + O₂ → 2CO. The CO then passes over warm iodine pentoxide: I₂O₅ + 5CO → I₂ + 5CO₂. Multiplying the first equation by 5 and the second by 2 balances the CO, showing that each mole of O₂ ends up as 2 mol of CO₂: 32 g of oxygen gives 88 g of CO₂. So % O = (32 × m₁ × 100) ÷ (88 × m), where m₁ is the mass of CO₂; the iodine formed can be used instead. Today a CHN elemental analyser measures C, H and N automatically on only 1-3 mg of sample.

From analysis data to the molecular formula

  1. Weigh the pure sample Mass m of the organic compound.
  2. Convert each element into a weighable product CO₂, H₂O, N₂ or NH₃, AgX, BaSO₄, Mg₂P₂O₇.
  3. Calculate mass per cent of each element Oxygen usually by difference.
  4. Divide by atomic masses and simplify Smallest whole-number ratio gives the empirical formula.
  5. Compare with molar mass Gives the molecular formula.

Key takeaways

  • % C = 12m₂×100/(44m); % H = 2m₁×100/(18m); water is absorbed by CaCl₂, CO₂ by KOH.
  • Dumas: correct the N₂ volume to STP after subtracting aqueous tension; % N = 28V×100/(22400m).
  • Kjeldahl: % N = 1.4 × M × 2(V − V₁/2)/m; not for nitro, azo or ring nitrogen.
  • Carius: % X from AgX, % S from BaSO₄ (233); % P from (NH₄)₃PO₄·12MoO₃ (1877) or Mg₂P₂O₇ (222).
  • Oxygen: usually by difference; directly, 32 g O₂ gives 88 g CO₂ via CO and I₂O₅.

Check your understanding

  1. 1. On complete combustion, 0.180 g of an organic compound gives 0.264 g of CO₂. What is the percentage of carbon? (C = 12, O = 16)

    1. 40.0%
    2. 26.7%
    3. 14.7%
    4. 53.3%
    Show answer

    Answer: A. Mass of C = 12/44 × 0.264 = 0.072 g. % C = 0.072 ÷ 0.180 × 100 = 40.0%.

  2. 2. In a Kjeldahl estimation, the ammonia from 0.40 g of a compound exactly neutralises 5.0 mL of 1.0 M H₂SO₄. What is the percentage of nitrogen? (N = 14)

    1. 17.5%
    2. 70.0%
    3. 35.0%
    4. 8.75%
    Show answer

    Answer: C. H₂SO₄ = 5.0 × 1.0/1000 = 0.0050 mol, which reacts with 2 × 0.0050 = 0.010 mol NH₃. N = 0.010 × 14 = 0.14 g, so % N = 0.14 ÷ 0.40 × 100 = 35.0%. Forgetting the factor 2 gives 17.5%.

  3. 3. In a Carius estimation, 0.20 g of an organic compound gives 0.233 g of BaSO₄. What is the percentage of sulphur? (Ba = 137, S = 32, O = 16)

    1. 32.0%
    2. 8.0%
    3. 11.7%
    4. 16.0%
    Show answer

    Answer: D. BaSO₄ = 233 g mol⁻¹, so 0.233 g is 0.0010 mol, containing 0.032 g S. % S = 0.032 ÷ 0.20 × 100 = 16.0%.

  4. 4. Assertion (A): Kjeldahl's method cannot be used to estimate nitrogen in nitrobenzene. Reason (R): Nitrogen of a nitro group is not converted into ammonium sulphate on heating with concentrated sulphuric acid.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: A. Both statements are true, and R is the reason: Kjeldahl's method measures nitrogen only as the ammonia released from ammonium sulphate, so nitro, azo and ring nitrogen escape measurement.

  5. 5. In a Carius estimation, 0.250 g of an organic compound gives 0.7175 g of AgCl. What is the percentage of chlorine? (Ag = 108, Cl = 35.5)

    1. 35.5%
    2. 71.0%
    3. 24.7%
    4. 49.5%
    Show answer

    Answer: B. AgCl = 143.5 g mol⁻¹, so 0.7175 g is 0.0050 mol, containing 0.0050 × 35.5 = 0.1775 g Cl. % Cl = 0.1775 ÷ 0.250 × 100 = 71.0%.

Privacy · Terms · Refunds · Delivery