• Foundation
  • About 25 min
  • 15 practice questions

Final self-assessment: Hydrocarbons

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 25 minutes, without looking back at the lessons. Draw the structures on paper as you work. The questions are a little harder than the lesson checks and include assertion-reason items. Check your answers only after you finish, and read every explanation.

Final self-assessment

  1. 1. How many chain isomers are possible for C₆H₁₄?

    1. 3
    2. 4
    3. 5
    4. 6
    Show answer

    Answer: C. Hexane, 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane and 2,3-dimethylbutane: five in all.

  2. 2. A mixture of bromomethane and bromoethane is heated with sodium in dry ether. Which alkanes are formed?

    1. Propane only
    2. Ethane, propane and butane
    3. Ethane and butane only
    4. Methane and ethane
    Show answer

    Answer: B. Any two alkyl groups can join: CH₃ + CH₃ → ethane, CH₃ + C₂H₅ → propane, C₂H₅ + C₂H₅ → butane. This mixture is why the Wurtz reaction is not used for odd-carbon alkanes.

  3. 3. Assertion (A): Sodium butanoate on heating with soda lime gives propane.
    Reason (R): Decarboxylation removes one carbon atom as CO₂ (ending up as Na₂CO₃).

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. CH₃CH₂CH₂COONa + NaOH → CH₃CH₂CH₃ + Na₂CO₃. The four-carbon salt gives a three-carbon alkane because one carbon leaves as carbonate. R explains A.

  4. 4. What volume of oxygen is needed to burn 5.0 L of butane completely (all volumes at the same temperature and pressure)?

    1. 32.5 L
    2. 20.0 L
    3. 65.0 L
    4. 25.0 L
    Show answer

    Answer: A. 2C₄H₁₀ + 13O₂ → 8CO₂ + 10H₂O, so 1 volume of butane needs 6.5 volumes of O₂. 5.0 × 6.5 = 32.5 L.

  5. 5. Arrange the following in order of increasing boiling point: hexane, 2,2-dimethylbutane, 2-methylpentane.

    1. Hexane < 2-methylpentane < 2,2-dimethylbutane
    2. 2-Methylpentane < hexane < 2,2-dimethylbutane
    3. 2,2-Dimethylbutane < hexane < 2-methylpentane
    4. 2,2-Dimethylbutane < 2-methylpentane < hexane
    Show answer

    Answer: D. All are C₆H₁₄. More branching gives a more compact shape, less surface contact and weaker van der Waals forces. So the most branched boils lowest and straight-chain hexane highest.

  6. 6. Which statement about the conformations of ethane is correct?

    1. The eclipsed form is more stable than the staggered form
    2. The two conformers can be separated at room temperature
    3. Bond angles change between the staggered and eclipsed forms
    4. The energy difference between them is small, about 12.5 kJ mol⁻¹
    Show answer

    Answer: D. Staggered is more stable; the barrier of about 12.5 kJ mol⁻¹ is easily crossed at room temperature, so the forms cannot be separated. Bond lengths and angles are the same in all conformations.

  7. 7. An alkene C₅H₁₀ gives propanone and ethanal on ozonolysis. What is it?

    1. Pent-2-ene
    2. 2-Methylbut-2-ene
    3. 3-Methylbut-1-ene
    4. 2-Methylbut-1-ene
    Show answer

    Answer: B. Join the carbonyl carbons of (CH₃)₂C=O and CH₃CH=O with a double bond: (CH₃)₂C=CHCH₃, 2-methylbut-2-ene. Pent-2-ene would give ethanal and propanal; the but-1-enes would give methanal.

  8. 8. What is the major product when 2-methylpropene reacts with HBr in the presence of benzoyl peroxide?

    1. 2-Bromo-2-methylpropane
    2. 1,2-Dibromo-2-methylpropane
    3. 1-Bromo-2-methylpropane
    4. 2-Methylpropan-2-ol
    Show answer

    Answer: C. With peroxide, Br• adds first to the CH₂ end, giving the more stable tertiary radical (CH₃)₂C•–CH₂Br, which takes H from HBr: (CH₃)₂CHCH₂Br, 1-bromo-2-methylpropane (anti-Markovnikov).

  9. 9. Assertion (A): cis-But-2-ene has a higher dipole moment than trans-but-2-ene.
    Reason (R): In trans-but-2-ene the two C–CH₃ bond dipoles point in opposite directions and cancel.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. cis-But-2-ene has a dipole moment of 0.33 D; in the trans isomer the bond dipoles cancel and the dipole moment is almost zero. R explains A.

  10. 10. Which of these reacts with sodamide (NaNH₂) to release ammonia?

    1. But-1-yne
    2. But-2-yne
    3. But-1-ene
    4. Butane
    Show answer

    Answer: A. Only a hydrogen on a triply bonded (sp) carbon is acidic enough. But-1-yne, CH₃CH₂C≡CH, has one; but-2-yne has none, and alkenes and alkanes are far less acidic.

  11. 11. Ethyne is passed into water containing HgSO₄ and dilute H₂SO₄ at 333 K. The product is:

    1. Ethanol
    2. Ethanoic acid
    3. Ethanal
    4. Ethane-1,2-diol
    Show answer

    Answer: C. One molecule of water adds to give the enol CH₂=CHOH, which changes at once into ethanal, CH₃CHO.

  12. 12. What mass of calcium carbide (CaC₂, 64 g mol⁻¹) is needed to produce 13 g of ethyne (26 g mol⁻¹), assuming complete reaction?

    1. 16 g
    2. 64 g
    3. 26 g
    4. 32 g
    Show answer

    Answer: D. CaC₂ + 2H₂O → Ca(OH)₂ + C₂H₂ (1 : 1). Moles of C₂H₂ = 13 ÷ 26 = 0.50 mol, so CaC₂ = 0.50 mol × 64 g mol⁻¹ = 32 g.

  13. 13. How many π electrons does naphthalene (C₁₀H₈, two fused benzene rings) have, and does it fit Hückel's rule?

    1. 10, yes (n = 2)
    2. 8, no
    3. 12, no
    4. 10, no
    Show answer

    Answer: A. Naphthalene has five C=C bonds in its Kekulé structure, so 10 π electrons. 4n + 2 = 10 gives n = 2, so it fits Hückel's rule and is aromatic (it is planar and fully delocalised).

  14. 14. Arrange in order of decreasing reactivity towards an electrophile: benzene, nitrobenzene, toluene.

    1. Nitrobenzene > benzene > toluene
    2. Toluene > benzene > nitrobenzene
    3. Benzene > toluene > nitrobenzene
    4. Toluene > nitrobenzene > benzene
    Show answer

    Answer: B. –CH₃ releases electrons and activates the ring, so toluene reacts fastest. –NO₂ withdraws electrons and deactivates the ring, so nitrobenzene reacts slowest. Benzene lies between.

  15. 15. What is formed when benzene reacts with chlorine in ultraviolet light, without a Lewis acid catalyst?

    1. Chlorobenzene
    2. Hexachlorobenzene, C₆Cl₆
    3. 1,4-Dichlorobenzene
    4. Benzene hexachloride, C₆H₆Cl₆
    Show answer

    Answer: D. In UV light chlorine adds across the ring (three molecules of Cl₂), giving benzene hexachloride (gammaxane). Substitution products such as chlorobenzene need a Lewis acid such as anhydrous AlCl₃ or FeCl₃.

Questions 1-3: lesson 1 (classification, alkane isomers and preparation). Questions 4-6: lesson 2 (properties, reactions and conformations of alkanes). Questions 7-9: lesson 3 (alkenes, isomerism and HBr addition). Questions 10-12: lesson 4 (further alkene reactions and alkynes). Questions 13-15: lesson 5 (aromatic hydrocarbons).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery