• Foundation
  • About 20 min
  • 5 practice questions

Coastal and desert landforms: waves, currents and winds

Compare high rocky and low sedimentary coasts and their erosional and depositional landforms, then explain how wind and sheet floods shape deserts, from pediments and playas to mushroom rocks and the main types of sand dunes.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Compare high rocky and low sedimentary coasts and name their landforms, with India's west and east coasts.
  • Explain cliffs, wave-cut terraces, sea caves, stacks, beaches, bars, spits and lagoons.
  • Explain desert erosion by wind and sheet floods and distinguish barchans, parabolic, seif, longitudinal and transverse dunes.

Coasts and deserts are two places where landforms change fast or look striking. Waves and currents shape the coast; wind, helped by sheet floods, shapes the desert.

Waves and currents

Coastal processes are the most dynamic and hence most destructive. Some changes happen very fast; one place may see erosion in one season and deposition in another. Most changes are made by breaking waves, which hurl water onto the shore and churn sediments on the sea bottom. Storm waves and tsunami waves can cause far-reaching changes in a short time. Besides wave action, coastal landforms depend on (i) the configuration of land and sea floor and (ii) whether the coast is advancing (emerging) seaward or retreating (submerging) landward. Assuming a constant sea level, two kinds of coast are considered.

Two types of coasts

  • High rocky coasts (submerged)
    • Rivers appear drowned; highly irregular, indented coastline
    • Hill sides drop sharply into water
    • Erosional features dominate
    • Example in India: the west coast
  • Low sedimentary coasts (emerged)
    • Rivers extend by building coastal plains and deltas
    • Smooth coastline with lagoons and tidal creeks
    • Land slopes gently; marshes and swamps
    • Depositional features dominate; example: India's east coast

Along high rocky coasts, waves pound hill sides into cliffs. As cliffs recede, a wave-cut platform is left in front. Fallen material breaks, is rounded and is deposited offshore; after long cliff retreat, a wave-built terrace develops in front of the wave-cut terrace. Eroded material lets longshore currents and waves build beaches and bars (submerged ridges of sand or shingle parallel to the coast). Bars that show above water are barrier bars; a barrier bar attached to the headland of a bay is a spit; bars and spits blocking a bay's mouth create a lagoon, which fills with sediment into a coastal plain. Along low sedimentary coasts, waves churn bottom sediments that readily build bars, barrier bars, spits and lagoons; lagoons become swamps and then coastal plains. Their maintenance needs a steady supply of sediment, and large rivers build deltas.

Coastal landforms

Coastal landforms

  • Erosional
    • Sea cliffs: steep, a few m to 30 m or more
    • Wave-cut terrace: debris-covered platform above average wave height at the cliff foot
    • Sea caves: hollows widened and deepened by waves and debris
    • Sea stacks: resistant rock remnants left as small islands offshore
  • Depositional
    • Beaches: mostly sand; shingle beaches of small pebbles and cobbles; temporary
    • Sand dunes: ridges parallel to the coast behind beaches
    • Off-shore bar: sand and shingle ridge parallel to the coast
    • Barrier bar: an off-shore bar exposed above water
    • Spit: barrier bar keyed to one end of a bay or a headland
    • Lagoon: bay closed off by bars and spits

Coastal defences: off-shore bars are the first buffer against storms and tsunamis, absorbing most of their force; then come barriers, beaches, beach dunes and mangroves. Disturbing the sediment budget or the mangroves lets these forms erode, leaving settlements to take the first strike.

From bay to coastal plain

  1. Bar forms offshore Sand and shingle ridge parallel to the coast.
  2. Barrier bar More sand raises it above water.
  3. Spit The barrier attaches to one end of the bay or a headland.
  4. Lagoon Bay mouth nearly closed.
  5. Coastal plain Lagoon fills with sediment from land and beach.

Winds and deserts

Wind is one of the two dominant agents in hot deserts. Dry, barren desert floors heat quickly and heat the air above, causing upward movements with turbulence; obstructions set up eddies, whirlwinds, updrafts and downdrafts, and storm winds are very destructive. Wind erodes by deflation (lifting and removing dust and small particles), abrasion (sand and silt used as tools) and impact (the momentum of sand blown against rock, like sand-blasting). Many desert features are also due to mass wasting and running water as sheet floods: rain is scarce but torrential, and rocks weakened by drastic daily temperature changes are easily washed away. Wind moves fine material, while general mass erosion is done mainly by sheet floods or sheet wash.

Desert erosional landforms

Landscape evolution in deserts is mainly the formation and extension of pediments: gently inclined rocky floors at the foot of mountains, with or without a thin debris cover, formed by lateral erosion by streams and sheet flooding. Once a pediment has a steep wash slope and a cliff or free face above, these retreat backwards: parallel retreat of slopes through backwasting. The mountain shrinks, leaving an inselberg, a remnant of the mountain, and high relief is reduced to low featureless plains called pediplains.

Reduction of a desert mountain

  1. Mountain front Steep margins attacked by streams and sheet floods.
  2. Pediment Gently inclined rocky floor forms at the foot.
  3. Backwasting Wash slope and free face retreat parallel to themselves.
  4. Inselberg A remnant of the mountain stands alone.
  5. Pediplain Low, featureless plain.

In basins with mountains around, drainage goes to the centre, and deposition from the margins forms a nearly level plain; when water is sufficient it is covered by a shallow lake called a playa, which evaporates quickly and often leaves salts; a playa covered with salts is an alkali flat. Wind blowing persistently in one direction removes weathered material and creates shallow deflation hollows and small pits; impact and abrasion make shallow blowouts, some of which deepen into caves. Easily eroded outcrops leave resistant remnants shaped like mushrooms (slender stalk, broad pear-shaped cap), tables or pedestals.

Desert depositional landforms: sand dunes

Wind is a good sorting agent. Grains move by rolling, saltation and suspension according to wind speed and are sorted on the way; when wind slows they settle by size, so wind deposits are well sorted. Dry hot deserts favour sand dunes, and obstacles to start a dune are equally important.

Types of sand dunes
Dune typeShapeConditions
BarchanCrescent with points or wings directed downwindConstant, moderate wind; uniform surface
ParabolicReversed barchan, same wind directionSandy surface partly covered by vegetation
SeifLike a barchan with only one wing, which can grow very long and highShift in wind conditions
LongitudinalLong ridges of considerable length but low heightPoor sand supply, constant wind direction
TransverseLong, low ridges perpendicular to the windConstant wind; elongated sand source at right angles to the wind

When sand is plentiful, regular dunes coalesce and lose their shapes. Most desert dunes shift; a few become stabilised, especially near settlements.

Rocky coasts: erosion (cliffs, wave-cut terraces, caves, stacks). Sedimentary coasts: deposition (beaches, bars, spits, lagoons). Deserts: sheet floods do most mass erosion and wind sorts sand into barchan, parabolic, seif, longitudinal and transverse dunes.

Worked example 1: which coast?

Classify (made-up descriptions): (i) cliffs, sea caves and a stack standing off a headland; (ii) a smooth coast with a lagoon behind a long sandbar and a delta nearby. Answers: (i) high rocky (submerged) coast, where erosion dominates, like India's west coast; (ii) low sedimentary (emerged) coast, where deposition dominates, like India's east coast.

Worked example 2: identify the dune

Identify the dune: (a) a crescent with horns pointing downwind on a bare, even sand surface under a steady moderate wind; (b) a similar crescent but with horns pointing upwind, on sand partly held by plants; (c) long, low ridges at right angles to the wind next to a long beach that supplies sand. Answers with reasons: (a) barchan; (b) parabolic, a reversed barchan where vegetation anchors the arms; (c) transverse dunes, aligned perpendicular to the wind with an elongated source.

Key takeaways: coasts are the most dynamic places. High rocky coasts (India's west coast) are dominated by erosion: cliffs, wave-cut terraces, sea caves and stacks. Low sedimentary coasts (India's east coast) are dominated by deposition: beaches, dunes, bars, barrier bars, spits and lagoons, which also protect against storms and tsunamis. In deserts, wind erodes by deflation, abrasion and impact, but sheet floods do most mass erosion; pediments retreat to leave inselbergs and pediplains, and playas, deflation hollows and mushroom rocks form. Wind sorts sand into barchans, parabolic, seif, longitudinal and transverse dunes.

Check your understanding

  1. 1. Which coast of India is described as a high rocky retreating coast where erosional forms dominate?

    1. The east coast
    2. The west coast
    3. Both coasts equally
    4. Neither coast
    Show answer

    Answer: B. The chapter says the west coast of India is a high rocky retreating coast with erosional forms, while the east coast is a low sedimentary coast with depositional forms.

  2. 2. A barrier bar that gets keyed up to one end of a bay is called a:

    1. lagoon
    2. stack
    3. spit
    4. wave-cut terrace
    Show answer

    Answer: C. When barrier bars are attached to one end of a bay or a headland they are called spits.

  3. 3. Crescent-shaped dunes with wings pointing downwind, formed under constant moderate winds on a uniform surface, are:

    1. barchans
    2. parabolic dunes
    3. transverse dunes
    4. longitudinal dunes
    Show answer

    Answer: A. Barchans are crescent-shaped with points directed downwind; parabolic dunes are reversed barchans formed where vegetation partly covers the sand.

  4. 4. A remnant of a mountain left standing as pediments extend backwards in a desert is an:

    1. alkali flat
    2. esker
    3. playa
    4. inselberg
    Show answer

    Answer: D. Through parallel retreat of slopes, pediments extend at the expense of the mountain, leaving a remnant called an inselberg; the final plain is a pediplain.

  5. 5. Assertion (A): In deserts, general mass erosion is accomplished mainly through sheet floods.
    Reason (R): Desert rain is scarce but torrential, and rocks weakened by drastic daily temperature changes are easily washed away.

    1. A is true but R is false.
    2. A is false but R is true.
    3. Both A and R are false.
    4. Both A and R are true, and R is the correct explanation of A.
    Show answer

    Answer: D. Torrential rain on rocks already decayed by temperature changes removes weathered debris quickly, so sheet floods do most mass erosion while wind moves fine material. R explains A.

Privacy · Terms · Refunds · Delivery