• Foundation
  • About 18 min
  • 5 practice questions

Glaciers and glacial landforms

Describe how glaciers move and erode, and explain glacial erosional landforms (cirques, tarns, horns, aretes, U-shaped valleys, hanging valleys, fjords) and depositional landforms (till, outwash, moraines, eskers, outwash plains, drumlins).

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe types of glaciers, their movement and how they erode.
  • Explain cirques, horns, aretes, U-shaped valleys, hanging valleys and fjords.
  • Distinguish till from outwash and explain moraines, eskers, outwash plains and drumlins.

Ice is a slow but powerful sculptor. Glaciers can grind down even unweathered rock and leave behind some of the most dramatic scenery on earth.

Glaciers and how they move

Glaciers are masses of ice moving either as sheets over land (a continental glacier, or a piedmont glacier if a vast sheet spreads over plains at the foot of mountains) or as linear flows down mountain slopes in broad, trough-like valleys (mountain and valley glaciers). Their movement is slow: from a few centimetres to a few metres a day, or even less or more. Glaciers move basically because of gravity.

India has many glaciers in the Himalayas, in the higher reaches of Uttarakhand, Himachal Pradesh and Jammu and Kashmir. The Bhagirathi is fed by meltwater from under the snout (Gaumukh) of the Gangotri glacier, and the Alkapuri glacier feeds the Alaknanda. The Alaknanda and Bhagirathi join to form the Ganga near Devprayag.

Glacial erosion is tremendous because of friction from the sheer weight of the ice. Material plucked from the land, usually large angular blocks and fragments, is dragged along the valley floor and sides and causes great damage through abrasion and plucking. Glaciers can damage even unweathered rocks and reduce high mountains to low hills and plains. As debris is removed and divides lowered, slopes eventually become so gentle that the glacier stops moving, leaving low hills and vast outwash plains.

Erosional landforms

Glacial erosional landforms

  • Cirque Deep, long, wide trough or basin with very steep concave to vertical walls at its head and sides, usually at the head of a glacial valley; may hold a cirque or tarn lake.
  • Horn High, sharp, steep-sided peak where three or more radiating glaciers cut headward until their cirques meet.
  • Arete (serrated ridge) Narrow, saw-toothed ridge with a sharp crest and zig-zag outline between cirque walls.
  • Glacial valley or trough U-shaped, with a broad floor and relatively smooth, steep sides; may contain moraines and lakes.
  • Hanging valley Tributary valley left high above the main glacial valley; spurs truncated into triangular facets.
  • Fjord Very deep glacial trough filled with sea water, forming shorelines in high latitudes.

According to the textbook, the Matterhorn, the highest peak in the Alps, and Everest, the highest peak in the Himalayas, are in fact horns formed through headward erosion of radiating cirques.

Glacial valley versus river valley

  • Glacial valley
    • U-shaped trough
    • Broad floor, smooth steep sides
    • Hanging valleys and truncated spurs
    • May hold moraines and lakes
  • River valley (youth)
    • V-shaped
    • Narrow floor
    • Tributaries usually join at the same level
    • Waterfalls where hard rock is exposed

Depositional landforms

The unassorted coarse and fine debris dropped by melting glaciers is glacial till; its fragments are angular to sub-angular. Streams formed by melting ice wash some smaller debris down and deposit it as glacio-fluvial or outwash deposits, which, unlike till, are roughly stratified and assorted, with fragments somewhat rounded.

Till versus outwash

  • Glacial till
    • Dropped directly by melting ice
    • Unassorted coarse and fine debris
    • Angular to sub-angular fragments
  • Outwash (glacio-fluvial) deposits
    • Laid down by meltwater streams
    • Roughly stratified and assorted
    • Somewhat rounded fragments

Moraines are long ridges of glacial till. Terminal moraines are deposited at the end (toe) of a glacier. Lateral moraines form along the sides, parallel to the valley, and may join a terminal moraine in a horse-shoe shape; they owe their origin partly or fully to glacio-fluvial water pushing material to the sides. Rapidly retreating valley glaciers leave an irregular sheet of till on the valley floor, a ground moraine. A moraine in the centre of the valley, flanked by lateral moraines, is a medial moraine; medial moraines are imperfectly formed and may be indistinguishable from ground moraines.

Eskers: in summer, meltwater flows on, along or through the ice and collects beneath the glacier as streams in channels with ice for banks. Very coarse material such as boulders and blocks settles in this ice channel and, after the ice melts, remains as a sinuous ridge called an esker. Outwash plains: beyond glacial mountains or continental ice sheets, glacio-fluvial deposits spread as broad, flat alluvial fans that join into plains of gravel, silt, sand and clay. Drumlins are smooth, oval, ridge-like features of glacial till with some gravel and sand, with long axes parallel to the direction of ice movement; they may be up to 1 km long and about 30 m high. The end facing the glacier, the stoss end, is blunter and steeper than the tail, because moving ice pushes against it. Drumlins form when debris is dumped beneath heavily loaded ice through fissures, and they indicate the direction of glacier movement.

Glacial depositional landforms
LandformMaterialPosition or shape
Terminal moraineTillRidge across the end (toe) of the glacier
Lateral moraineTillRidges along the valley sides
Medial moraineTillCentre of the valley, between lateral moraines
Ground moraineTillIrregular sheet on the valley floor
EskerCoarse debris from sub-glacial streamsSinuous ridge
DrumlinTill with some gravel and sandOval ridge parallel to ice movement; blunt stoss end
Outwash plainGlacio-fluvial gravel, silt, sand, clayBroad plain beyond the ice

Glaciers carve cirques, horns, aretes, U-shaped valleys, hanging valleys and fjords. They drop unsorted till as moraines and drumlins; meltwater lays sorted outwash as eskers and outwash plains.

Worked example 1: reading a drumlin

A made-up drumlin field shows each drumlin with its blunt, steep end towards the north and its gently tapering tail towards the south. Which way did the ice move? Reasoning: the stoss end faces the oncoming glacier and is blunted by the pushing ice, and the long axis is parallel to the ice flow. Answer: the ice moved from north to south.

Worked example 2: how long for a glacier to travel?

A made-up valley glacier moves 2 m a day. How long would ice take to travel 10 km? Working: 10 km = 10,000 m. Days = 10,000 ÷ 2 = 5,000 days. Years = 5,000 ÷ 365 ≈ 13.7 years. Answer: about 13.7 years, showing how slow glaciers are compared with rivers, yet their weight makes their erosion tremendous.

Key takeaways: glaciers are continental, piedmont, or mountain and valley glaciers moving by gravity at a few centimetres to a few metres a day; they erode by abrasion and plucking even unweathered rock. Erosional forms are cirques (with tarn lakes), horns (such as the Matterhorn and Everest, per the textbook), aretes, U-shaped troughs, hanging valleys and fjords. Till is unsorted and angular; outwash is roughly sorted and rounded. Depositional forms are terminal, lateral, ground and medial moraines, eskers, outwash plains and drumlins, whose blunt stoss end faces the oncoming ice.

Check your understanding

  1. 1. A deep, long and wide trough or basin with very steep concave high walls at its head and sides is a:

    1. cirque
    2. glacial valley
    3. lateral moraine
    4. esker
    Show answer

    Answer: A. This is the chapter's description of a cirque, which is often found at the head of a glacial valley and may hold a tarn lake.

  2. 2. A sinuous ridge of coarse material left by a stream that flowed in an ice channel beneath a glacier is an:

    1. arete
    2. esker
    3. outwash plain
    4. medial moraine
    Show answer

    Answer: B. Meltwater streams beneath a glacier deposit coarse debris in their ice-walled channel; after the ice melts it remains as a sinuous ridge called an esker.

  3. 3. How does glacial till differ from outwash deposits?

    1. Till is sorted and rounded; outwash is unsorted and angular.
    2. Till is laid by wind; outwash by ice.
    3. Till is unassorted with angular fragments; outwash is roughly stratified with somewhat rounded fragments.
    4. Both are identical.
    Show answer

    Answer: C. Till is dropped directly by melting ice and is unassorted and angular; outwash is laid by meltwater streams and is roughly stratified, assorted and rounded.

  4. 4. Very deep glacial troughs filled with sea water and forming shorelines in high latitudes are:

    1. cirques
    2. uvalas
    3. lagoons
    4. fjords
    Show answer

    Answer: D. The chapter defines fjords (fiords) as very deep glacial troughs filled with sea water, making up shorelines in high latitudes.

  5. 5. Assertion (A): Drumlins indicate the direction of glacier movement.
    Reason (R): The long axes of drumlins are parallel to the direction of ice movement, and their stoss end faces the glacier.

    1. A is false but R is true.
    2. Both A and R are true, and R is the correct explanation of A.
    3. A is true but R is false.
    4. Both A and R are false.
    Show answer

    Answer: B. Because drumlins are aligned with the ice flow and have a blunt stoss end facing the oncoming ice, their shape shows the direction of movement. R explains A.

Privacy · Terms · Refunds · Delivery