- Foundation
- About 16 min
- 5 practice questions
Groundwater and karst landforms
Explain how groundwater shapes landforms in limestone and dolomite through solution and precipitation, and describe karst erosional forms (swallow holes, sinkholes, dolines, uvalas, lapies, caves) and depositional forms (stalactites, stalagmites, pillars).
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain where and why groundwater forms landforms, and what karst topography is.
- Distinguish swallow holes, solution and collapse sinkholes, uvalas, lapies and caves.
- Explain how stalactites, stalagmites and pillars form.
Our interest here is not groundwater as a resource but its work in eroding landmasses and shaping landforms.
How groundwater works
Surface water percolates well when rocks are permeable, thinly bedded and highly jointed and cracked. After going down to some depth, it flows horizontally through bedding planes, joints or the material itself. This downward and horizontal movement erodes rocks. Mechanical removal by groundwater is insignificant in making landforms, so groundwater's work is not seen in all rocks. But in rocks rich in calcium carbonate, such as limestones and dolomites, surface water and groundwater produce many landforms through the chemical processes of solution and precipitation (deposition).
A limestone or dolomite region with typical landforms made by groundwater through solution and deposition is said to have karst topography, named after the Karst region of the Balkans next to the Adriatic Sea.
Karst topography: landforms produced in limestone or dolomite by groundwater through solution and precipitation, named after the Karst region in the Balkans.
Erosional karst landforms
Erosional karst landforms
- Swallow holes Small to medium round or sub-rounded shallow depressions formed by solution on the limestone surface.
-
Sinkholes
Openings roughly circular at top and funnel-shaped below; a few sq m to a hectare in area; under half a metre to 30 m or more deep.
- Solution sinks: formed solely by solution; more common
- Collapse sinks (dolines): the roof of a cave or void below collapses
- Valley sinks or uvalas Long, narrow to wide trenches formed when sinkholes and dolines join through slumping or cave-roof collapse.
- Lapies Maze of points, grooves and ridges from differential solution along parallel joints; may become smooth limestone pavements.
- Caves and tunnels Gaps dissolved along bedding planes; caves open at both ends are tunnels.
Sinkholes are very common in karst areas. They are often covered by a soil mantle and look like shallow pools; anyone stepping on one may sink as in quicksand. Surface run-off often disappears down swallow holes and sinkholes, flows as underground streams and re-emerges downstream through a cave opening. Gradually most of the limestone surface is eaten away by pits and trenches, leaving it very irregular with lapies.
Caves
Caves form prominently where beds of other rocks (shales, sandstones, quartzites) alternate with limestones or dolomites, or where limestone is dense, massive and thickly bedded. Water percolates through the material or through cracks and joints and moves horizontally along bedding planes; there the limestone dissolves, forming long, narrow to wide gaps called caves. There may be a maze of caves at different levels. Caves usually have an opening that discharges a cave stream; caves open at both ends are tunnels.
From swallow hole to limestone pavement
- Swallow holes Solution makes shallow depressions.
- Sinkholes Depressions deepen into funnels; some collapse into caves (dolines).
- Uvalas Sinkholes and dolines join into trenches.
- Lapies Surface becomes a maze of points, grooves and ridges.
- Limestone pavement The lapie field may become fairly smooth.
Depositional karst landforms
The chief chemical in limestone, calcium carbonate, dissolves easily in carbonated water (rainwater that has absorbed carbon dioxide). It is deposited when the water carrying it evaporates or loses its carbon dioxide as it trickles over rough rock surfaces. This builds features inside caves.
Cave deposits
-
Stalactites
- Hang from the roof like icicles
- Broad at the base, tapering to the free end
- Many forms and diameters
-
Stalagmites
- Rise from the cave floor
- Form from water dripping from the roof or through a stalactite's thin pipe directly above
- Column, disc, rounded end or small crater-like top
-
Pillars and columns
- Stalactite and stalagmite fuse
- Various diameters
- Join roof to floor
How a cave deposit forms
- Rain absorbs carbon dioxide It becomes carbonated water.
- Dissolves calcium carbonate Water carries limestone in solution.
- Drips in a cave It evaporates or loses carbon dioxide on rough surfaces.
- Calcium carbonate deposited Stalactites, stalagmites and pillars grow.
Worked example 1: name the karst feature
Identify (made-up descriptions): (i) a funnel-shaped hole 10 m deep that appeared when a cave roof fell in; (ii) a long trench formed where several sinkholes merged; (iii) an icicle-like form hanging from a cave roof; (iv) an irregular limestone surface of sharp ridges and grooves along joints. Answers: (i) collapse sink, or doline; (ii) valley sink, or uvala; (iii) stalactite; (iv) lapies.
Worked example 2: why rivers vanish in limestone
Explain why underground flow is more common than surface run-off in a limestone area. Step 1: limestone is soluble and usually jointed and bedded, so water dissolves wider paths along joints and bedding planes. Step 2: swallow holes and sinkholes open up on the surface. Step 3: run-off disappears down these and flows as underground streams through caves, re-emerging downstream. Answer: solution creates openings that divert surface water underground.
Worked example 3: sizing a sinkhole
A made-up circular sinkhole has a diameter of 40 m at the top. Is its area within the range the book gives (a few square metres to a hectare)? Working: radius = 20 m; area = 3.14 × 20 × 20 = 1,256 square metres. One hectare = 10,000 square metres. Answer: 1,256 sq m is within the range, about one-eighth of a hectare.
Key takeaways: groundwater shapes landforms mainly by solution and precipitation in limestones and dolomites; this gives karst topography, named after the Karst region of the Balkans. Erosional forms are swallow holes, sinkholes (solution sinks and collapse sinks or dolines), uvalas, lapies, limestone pavements, caves and tunnels. Depositional forms in caves are stalactites (hanging), stalagmites (rising) and pillars or columns where they join, formed when carbonated water evaporates or loses carbon dioxide.
Check your understanding
-
1. Which one best defines lapies?
- A small to medium sized shallow depression
- An opening circular at top and funnel-shaped below
- A form produced by water dripping from the surface
- An irregular surface with sharp points, grooves and ridges
Show answer
Answer: D. Lapies are a maze of points, grooves and ridges formed by differential solution along joints; the other options describe swallow holes, sinkholes and stalagmites.
-
2. The term doline is sometimes used to refer to:
- collapse sinks
- stalactites
- tunnels
- uvalas
Show answer
Answer: A. The chapter says the term doline is sometimes used for collapse sinks, which form when the roof of an underground void collapses.
-
3. Caves that have openings at both ends are called:
- sinkholes
- uvalas
- tunnels
- lapies
Show answer
Answer: C. Caves normally have one opening for the cave stream; caves open at both ends are called tunnels.
-
4. Stalagmites form:
- by wind abrasion
- from water dripping from above onto the cave floor
- by glaciers
- by collapse of cave roofs
Show answer
Answer: B. Stalagmites rise from the cave floor where water drips from the surface or through a stalactite above, depositing calcium carbonate.
-
5. Assertion (A): Groundwater forms distinctive landforms in limestone but not in most other rocks.
Reason (R): Mechanical removal by groundwater is insignificant, while limestone is easily dissolved and redeposited by chemical processes.- A is true but R is false.
- A is false but R is true.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are false.
Show answer
Answer: C. Because groundwater erodes mainly by solution, not mechanically, its landforms appear where rocks like limestone dissolve easily. R explains A.
Sign in to keep track of the lessons you finish.