• Foundation
  • About 18 min
  • 5 practice questions

Landforms of running water: valleys to deltas

Describe the erosional landforms of running water (valleys, gorges, canyons, potholes, plunge pools, incised meanders, river terraces) and the depositional ones (alluvial fans, deltas, floodplains, natural levees, point bars, meanders and oxbow lakes).

If something looks wrong, please tell us.

By the end of this lesson you can

  • Distinguish a gorge from a canyon and explain potholes, plunge pools and incised meanders.
  • Explain river terraces and compare alluvial fans with deltas.
  • Explain floodplains, natural levees, point bars, meanders and oxbow lakes.

Running water both carves and builds. In its steep upper reaches it mainly erodes; where its gradient eases it mainly deposits. This lesson describes both sets of landforms.

Erosional landforms

Valleys, gorges and canyons

Valleys begin as small, narrow rills that develop into long, wide gullies, which deepen, widen and lengthen into valleys. By shape and size we recognise V-shaped valleys, gorges and canyons. A gorge is a deep valley with very steep to straight sides, almost equal in width at top and bottom. A canyon has steep, step-like side slopes and may be as deep as a gorge, but is wider at the top than at the bottom; a canyon is a variant of a gorge. Valley type depends on rock type and structure: canyons commonly form in horizontally bedded sedimentary rocks, and gorges in hard rocks.

Gorge versus canyon

  • Gorge
    • Very steep to straight sides
    • Almost equal width at top and bottom
    • Forms in hard rocks
  • Canyon
    • Steep, step-like side slopes
    • Wider at the top than at the bottom
    • Forms in horizontally bedded sedimentary rocks

Potholes and plunge pools

On the rocky beds of hill streams, more or less circular depressions called potholes form by stream erosion aided by abrasion. Once a shallow depression forms, pebbles and boulders collect in it and are rotated by the flowing water, enlarging it; a series of potholes may join and deepen the valley. At the foot of waterfalls, large, deep potholes form from the sheer impact of water and rotation of boulders; these are plunge pools.

Incised or entrenched meanders

Streams on steep gradients erode mainly the bottom of the channel, with little lateral erosion. On gentle slopes, active lateral erosion produces sinuous or meandering courses, common on floodplains and delta plains. But very deep and wide meanders are also found cut into hard rock; these are incised or entrenched meanders. They suggest a meandering river that later cut down vertically into the rock while keeping its loops.

River terraces

River terraces are surfaces marking old valley floor or floodplain levels. They may be bare bedrock surfaces or alluvial terraces of stream deposits. They are basically products of erosion, formed when a stream cuts vertically into its own depositional floodplain. Several terraces at different heights record former river bed levels. Terraces at the same elevation on both sides of a river are paired terraces.

Depositional landforms

Alluvial fans and deltas

Alluvial fans form when streams from higher levels break into foot-slope plains of low gradient. The very coarse load carried down mountain slopes becomes too heavy for the gentler gradient and is dumped as a broad, low to high cone-shaped deposit. Streams on a fan shift across it, forming many channels called distributaries. Fans in humid areas are low cones with gentle slopes; in arid and semi-arid climates they are high cones with steep slopes.

Deltas are like alluvial fans but form where a river dumps its load into the sea. If the load is not carried far out or spread along the coast, it accumulates as a low cone. Unlike fans, delta deposits are very well sorted with clear stratification: coarse material settles first, while silt and clay are carried farther out. As the delta grows, distributaries lengthen and the delta builds out into the sea.

Alluvial fan versus delta

  • Alluvial fan
    • Forms at the foot of mountains where gradient suddenly falls
    • Coarse load dumped
    • Distributaries shift across the fan
    • Low cones in humid areas, high cones in dry areas
  • Delta
    • Forms where a river enters the sea
    • Load spread into the sea as a low cone
    • Very well sorted, clearly stratified
    • Distributaries lengthen as it grows

Floodplains, natural levees and point bars

Just as erosion makes valleys, deposition makes floodplains, a major landform of river deposition. Large material is dropped first where the channel meets a gentle slope; finer sand, silt and clay are carried by slower water and deposited on the bed and, when water spills over the banks in floods, above it. The river bed of river deposits is the active floodplain; the floodplain above the banks is the inactive floodplain. The inactive floodplain has flood deposits (finer silt and clay from spilled water) and channel deposits (coarser material filling abandoned or cut-off channels). Floodplains in a delta are delta plains.

Natural levees are low, linear, parallel ridges of coarse deposits along the banks of large rivers, often broken into mounds. Point bars (also called meander bars) are sediments deposited in a linear fashion along the bank on the inner side of meander bends, where deposition takes place; they are fairly uniform in profile and width and contain mixed sizes of sediment.

Meanders and oxbow lakes

On large flood and delta plains, rivers rarely flow straight; they form loop-like channel patterns called meanders. A meander is not a landform but a type of channel pattern. Meanders develop because (i) water on very gentle gradients tends to work laterally on the banks; (ii) the banks are of unconsolidated alluvium with many irregularities that water can push against; and (iii) the Coriolis force deflects the flowing water, as it deflects wind. On very low gradients a slight irregularity in a bank grows into a curve: deposition on the inside and erosion on the outside deepen it. In large rivers there is active deposition along the convex bank and undercutting along the concave bank; the concave (undercut) bank appears as a steep scarp and the convex (slip-off) bank has a long, gentle profile. As loops grow, they may be cut off at the inflection points, leaving oxbow lakes.

How a meander grows and is cut off

  1. Slight bend An irregularity in a bank on a gentle gradient.
  2. Erosion outside, deposition inside Undercutting on the concave bank; deposition on the convex bank.
  3. Deep loop The bend grows into a large loop.
  4. Cut-off Erosion at the neck joins the channel; the loop becomes an oxbow lake, and new bends start forming.

Then back to step 1: Slight bend

Gorge: steep, equal width top and bottom, hard rock. Canyon: step-like, wider at top, bedded sedimentary rock. Fans dump coarse load at mountain feet; deltas spread sorted load into the sea. Meanders erode the concave bank, deposit on the convex bank and leave oxbow lakes.

Worked example 1: identify the landform

Identify each (made-up descriptions): (i) a round, deep hole at the base of a waterfall; (ii) flat steps at the same height on both sides of a river valley; (iii) a crescent-shaped lake beside a meandering river on a plain; (iv) a cone of coarse gravel where a mountain stream meets a plain. Answers: (i) plunge pool; (ii) paired river terraces; (iii) oxbow lake; (iv) alluvial fan.

Worked example 2: why is a canyon wider at the top?

Reasoning in steps: canyons form in horizontally bedded sedimentary rocks. Step 1: the river cuts down through the layers. Step 2: layers of different resistance retreat at different rates, so harder layers stand as steps while softer layers wear back. Step 3: the upper layers have been exposed longest and have retreated farthest. Answer: the step-like slopes widen upward, so a canyon is wider at the top than at the bottom, unlike a gorge in uniform hard rock.

Key takeaways: erosional landforms of running water include V-shaped valleys, gorges (steep, equal width, hard rocks), canyons (step-like, wider at top, bedded sedimentary rocks), potholes, plunge pools, incised meanders and river terraces (paired if at the same height on both sides). Depositional landforms include alluvial fans (coarse cones at mountain feet), deltas (well-sorted, stratified deposits in the sea), floodplains (active and inactive), natural levees (coarse ridges along banks), point bars and meanders, whose loops are cut off as oxbow lakes.

Check your understanding

  1. 1. A deep valley characterised by steep step-like side slopes is known as a:

    1. U-shaped valley
    2. gorge
    3. canyon
    4. blind valley
    Show answer

    Answer: C. A canyon has steep, step-like side slopes and is wider at the top than at the bottom; a gorge has steep to straight sides.

  2. 2. Large, deep potholes at the base of waterfalls are called:

    1. plunge pools
    2. oxbow lakes
    3. point bars
    4. terraces
    Show answer

    Answer: A. At the foot of waterfalls, the impact of water and rotating boulders form large, deep potholes called plunge pools.

  3. 3. Which statement about deltas is correct?

    1. Delta deposits are unsorted.
    2. Deltas form at the foot of mountains.
    3. Deltas are high cones in arid areas.
    4. Delta deposits are very well sorted with clear stratification.
    Show answer

    Answer: D. Unlike alluvial fans, delta deposits are very well sorted and clearly stratified; coarse material settles first and finer silt and clay go farther out.

  4. 4. Low, linear, parallel ridges of coarse deposits along the banks of large rivers are:

    1. point bars
    2. natural levees
    3. river terraces
    4. eskers
    Show answer

    Answer: B. Natural levees are low, linear, parallel ridges of coarse deposits along river banks, often cut into individual mounds.

  5. 5. Assertion (A): A meander is not a landform but a type of channel pattern.
    Reason (R): Meanders develop because water on very gentle gradients works laterally on unconsolidated banks and is deflected by the Coriolis force.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true but R is false.
    4. A is false but R is true.
    Show answer

    Answer: B. Both statements are in the chapter. R explains why meanders develop, but not why a meander is classed as a channel pattern rather than a landform, so R does not explain A.

Sign in to keep track of the lessons you finish.

Next lesson → Groundwater and karst landforms

Privacy · Terms · Refunds · Delivery