Revision notes

Chapter 6 Landforms and their Evolution: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Landforms, their evolution and the stages of a river landscape

A landform is a small to medium tract of the earth's surface; related landforms make a landscape. Evolution of landforms means their stages of transformation through time: youth, mature and old.

How running water reduces a landmass

  1. Sheet erosion Overland flow removes surface material.
  2. Rills Small, narrow channels form along the flow paths.
  3. Gullies Rills grow long and wide.
  4. Valleys Gullies deepen, widen, lengthen and unite.
  5. Lateral erosion Valley sides and divides are lowered.
  6. Peneplain An almost plain with monadnocks standing out.
Youth, mature and old stages in a running-water landscape
FeatureYouthMatureOld
StreamsFew, poorly integrated, flowing over original slopesPlenty, well integratedFew small tributaries with gentle gradients
ValleysShallow V-shaped; no or very narrow floodplainsV-shaped but deep; wider floodplains along trunk streamsVast floodplains
MeandersMay develop on broad uplands and become entrenchedConfined within the valleyStreams meander freely; natural levees, oxbow lakes
DividesBroad and flat with marshes, swamps and lakesSharp; earlier swamps and marshes disappearBroad and flat with lakes, swamps and marshes
Waterfalls and rapidsMay exist where hard rock is exposedDisappearAbsent
Overall heightOriginal uplandDeeply dissectedAt or slightly above sea level

Erosion through the stages

  • Youth
    • Down-cutting dominates
    • Waterfalls and rapids on hard rock
    • Narrow V-shaped valleys
  • Mature
    • Down-cutting slows
    • Lateral erosion widens valleys
    • Sharp divides
  • Old
    • Lateral erosion and deposition dominate
    • Free meanders on floodplains
    • Peneplain near sea level

Key takeaways: a landform is a small to medium tract of the surface; related landforms make a landscape; every landform has a history and evolves through youth, mature and old stages. Running water, the most important agent in humid regions, works as overland flow and as streams. Sheet erosion leads to rills, gullies and valleys; down-cutting dominates early, lateral erosion later, until a peneplain with monadnocks remains. Youth has few streams and broad flat divides; maturity has many streams and sharp divides; old age has free meanders on vast floodplains near sea level.

Read the full lesson

Lesson 2

Landforms of running water: valleys to deltas

Gorge versus canyon

  • Gorge
    • Very steep to straight sides
    • Almost equal width at top and bottom
    • Forms in hard rocks
  • Canyon
    • Steep, step-like side slopes
    • Wider at the top than at the bottom
    • Forms in horizontally bedded sedimentary rocks

Alluvial fan versus delta

  • Alluvial fan
    • Forms at the foot of mountains where gradient suddenly falls
    • Coarse load dumped
    • Distributaries shift across the fan
    • Low cones in humid areas, high cones in dry areas
  • Delta
    • Forms where a river enters the sea
    • Load spread into the sea as a low cone
    • Very well sorted, clearly stratified
    • Distributaries lengthen as it grows

How a meander grows and is cut off

  1. Slight bend An irregularity in a bank on a gentle gradient.
  2. Erosion outside, deposition inside Undercutting on the concave bank; deposition on the convex bank.
  3. Deep loop The bend grows into a large loop.
  4. Cut-off Erosion at the neck joins the channel; the loop becomes an oxbow lake, and new bends start forming.

Then back to step 1: Slight bend

Gorge: steep, equal width top and bottom, hard rock. Canyon: step-like, wider at top, bedded sedimentary rock. Fans dump coarse load at mountain feet; deltas spread sorted load into the sea. Meanders erode the concave bank, deposit on the convex bank and leave oxbow lakes.

Key takeaways: erosional landforms of running water include V-shaped valleys, gorges (steep, equal width, hard rocks), canyons (step-like, wider at top, bedded sedimentary rocks), potholes, plunge pools, incised meanders and river terraces (paired if at the same height on both sides). Depositional landforms include alluvial fans (coarse cones at mountain feet), deltas (well-sorted, stratified deposits in the sea), floodplains (active and inactive), natural levees (coarse ridges along banks), point bars and meanders, whose loops are cut off as oxbow lakes.

Read the full lesson

Lesson 3

Groundwater and karst landforms

Karst topography: landforms produced in limestone or dolomite by groundwater through solution and precipitation, named after the Karst region in the Balkans.

Erosional karst landforms

  • Swallow holes Small to medium round or sub-rounded shallow depressions formed by solution on the limestone surface.
  • Sinkholes Openings roughly circular at top and funnel-shaped below; a few sq m to a hectare in area; under half a metre to 30 m or more deep.
    • Solution sinks: formed solely by solution; more common
    • Collapse sinks (dolines): the roof of a cave or void below collapses
  • Valley sinks or uvalas Long, narrow to wide trenches formed when sinkholes and dolines join through slumping or cave-roof collapse.
  • Lapies Maze of points, grooves and ridges from differential solution along parallel joints; may become smooth limestone pavements.
  • Caves and tunnels Gaps dissolved along bedding planes; caves open at both ends are tunnels.

From swallow hole to limestone pavement

  1. Swallow holes Solution makes shallow depressions.
  2. Sinkholes Depressions deepen into funnels; some collapse into caves (dolines).
  3. Uvalas Sinkholes and dolines join into trenches.
  4. Lapies Surface becomes a maze of points, grooves and ridges.
  5. Limestone pavement The lapie field may become fairly smooth.

Cave deposits

  • Stalactites
    • Hang from the roof like icicles
    • Broad at the base, tapering to the free end
    • Many forms and diameters
  • Stalagmites
    • Rise from the cave floor
    • Form from water dripping from the roof or through a stalactite's thin pipe directly above
    • Column, disc, rounded end or small crater-like top
  • Pillars and columns
    • Stalactite and stalagmite fuse
    • Various diameters
    • Join roof to floor

How a cave deposit forms

  1. Rain absorbs carbon dioxide It becomes carbonated water.
  2. Dissolves calcium carbonate Water carries limestone in solution.
  3. Drips in a cave It evaporates or loses carbon dioxide on rough surfaces.
  4. Calcium carbonate deposited Stalactites, stalagmites and pillars grow.

Key takeaways: groundwater shapes landforms mainly by solution and precipitation in limestones and dolomites; this gives karst topography, named after the Karst region of the Balkans. Erosional forms are swallow holes, sinkholes (solution sinks and collapse sinks or dolines), uvalas, lapies, limestone pavements, caves and tunnels. Depositional forms in caves are stalactites (hanging), stalagmites (rising) and pillars or columns where they join, formed when carbonated water evaporates or loses carbon dioxide.

Read the full lesson

Lesson 4

Glaciers and glacial landforms

Glacial erosional landforms

  • Cirque Deep, long, wide trough or basin with very steep concave to vertical walls at its head and sides, usually at the head of a glacial valley; may hold a cirque or tarn lake.
  • Horn High, sharp, steep-sided peak where three or more radiating glaciers cut headward until their cirques meet.
  • Arete (serrated ridge) Narrow, saw-toothed ridge with a sharp crest and zig-zag outline between cirque walls.
  • Glacial valley or trough U-shaped, with a broad floor and relatively smooth, steep sides; may contain moraines and lakes.
  • Hanging valley Tributary valley left high above the main glacial valley; spurs truncated into triangular facets.
  • Fjord Very deep glacial trough filled with sea water, forming shorelines in high latitudes.

Glacial valley versus river valley

  • Glacial valley
    • U-shaped trough
    • Broad floor, smooth steep sides
    • Hanging valleys and truncated spurs
    • May hold moraines and lakes
  • River valley (youth)
    • V-shaped
    • Narrow floor
    • Tributaries usually join at the same level
    • Waterfalls where hard rock is exposed

Till versus outwash

  • Glacial till
    • Dropped directly by melting ice
    • Unassorted coarse and fine debris
    • Angular to sub-angular fragments
  • Outwash (glacio-fluvial) deposits
    • Laid down by meltwater streams
    • Roughly stratified and assorted
    • Somewhat rounded fragments
Glacial depositional landforms
LandformMaterialPosition or shape
Terminal moraineTillRidge across the end (toe) of the glacier
Lateral moraineTillRidges along the valley sides
Medial moraineTillCentre of the valley, between lateral moraines
Ground moraineTillIrregular sheet on the valley floor
EskerCoarse debris from sub-glacial streamsSinuous ridge
DrumlinTill with some gravel and sandOval ridge parallel to ice movement; blunt stoss end
Outwash plainGlacio-fluvial gravel, silt, sand, clayBroad plain beyond the ice

Glaciers carve cirques, horns, aretes, U-shaped valleys, hanging valleys and fjords. They drop unsorted till as moraines and drumlins; meltwater lays sorted outwash as eskers and outwash plains.

Key takeaways: glaciers are continental, piedmont, or mountain and valley glaciers moving by gravity at a few centimetres to a few metres a day; they erode by abrasion and plucking even unweathered rock. Erosional forms are cirques (with tarn lakes), horns (such as the Matterhorn and Everest, per the textbook), aretes, U-shaped troughs, hanging valleys and fjords. Till is unsorted and angular; outwash is roughly sorted and rounded. Depositional forms are terminal, lateral, ground and medial moraines, eskers, outwash plains and drumlins, whose blunt stoss end faces the oncoming ice.

Read the full lesson

Lesson 5

Coastal and desert landforms: waves, currents and winds

Two types of coasts

  • High rocky coasts (submerged)
    • Rivers appear drowned; highly irregular, indented coastline
    • Hill sides drop sharply into water
    • Erosional features dominate
    • Example in India: the west coast
  • Low sedimentary coasts (emerged)
    • Rivers extend by building coastal plains and deltas
    • Smooth coastline with lagoons and tidal creeks
    • Land slopes gently; marshes and swamps
    • Depositional features dominate; example: India's east coast

Coastal landforms

  • Erosional
    • Sea cliffs: steep, a few m to 30 m or more
    • Wave-cut terrace: debris-covered platform above average wave height at the cliff foot
    • Sea caves: hollows widened and deepened by waves and debris
    • Sea stacks: resistant rock remnants left as small islands offshore
  • Depositional
    • Beaches: mostly sand; shingle beaches of small pebbles and cobbles; temporary
    • Sand dunes: ridges parallel to the coast behind beaches
    • Off-shore bar: sand and shingle ridge parallel to the coast
    • Barrier bar: an off-shore bar exposed above water
    • Spit: barrier bar keyed to one end of a bay or a headland
    • Lagoon: bay closed off by bars and spits

From bay to coastal plain

  1. Bar forms offshore Sand and shingle ridge parallel to the coast.
  2. Barrier bar More sand raises it above water.
  3. Spit The barrier attaches to one end of the bay or a headland.
  4. Lagoon Bay mouth nearly closed.
  5. Coastal plain Lagoon fills with sediment from land and beach.

Reduction of a desert mountain

  1. Mountain front Steep margins attacked by streams and sheet floods.
  2. Pediment Gently inclined rocky floor forms at the foot.
  3. Backwasting Wash slope and free face retreat parallel to themselves.
  4. Inselberg A remnant of the mountain stands alone.
  5. Pediplain Low, featureless plain.
Types of sand dunes
Dune typeShapeConditions
BarchanCrescent with points or wings directed downwindConstant, moderate wind; uniform surface
ParabolicReversed barchan, same wind directionSandy surface partly covered by vegetation
SeifLike a barchan with only one wing, which can grow very long and highShift in wind conditions
LongitudinalLong ridges of considerable length but low heightPoor sand supply, constant wind direction
TransverseLong, low ridges perpendicular to the windConstant wind; elongated sand source at right angles to the wind

Rocky coasts: erosion (cliffs, wave-cut terraces, caves, stacks). Sedimentary coasts: deposition (beaches, bars, spits, lagoons). Deserts: sheet floods do most mass erosion and wind sorts sand into barchan, parabolic, seif, longitudinal and transverse dunes.

Key takeaways: coasts are the most dynamic places. High rocky coasts (India's west coast) are dominated by erosion: cliffs, wave-cut terraces, sea caves and stacks. Low sedimentary coasts (India's east coast) are dominated by deposition: beaches, dunes, bars, barrier bars, spits and lagoons, which also protect against storms and tsunamis. In deserts, wind erodes by deflation, abrasion and impact, but sheet floods do most mass erosion; pediments retreat to leave inselbergs and pediplains, and playas, deflation hollows and mushroom rocks form. Wind sorts sand into barchans, parabolic, seif, longitudinal and transverse dunes.

Read the full lesson

Privacy · Terms · Refunds · Delivery