- Foundation
- About 22 min
- 5 practice questions
Kinetic energy and the work-energy theorem
Define kinetic energy, derive the work-energy theorem for constant and variable forces, find work as the area under a force-displacement graph, and solve problems with it.
If something looks wrong, please tell us.
By the end of this lesson you can
- Derive the work-energy theorem from v² − u² = 2as and Newton's second law.
- Define kinetic energy K = ½mv² and explain it as a capacity to do work.
- Find the work done by a variable force as ∫F dx, the area under an F-x graph.
- Prove the work-energy theorem for a variable force using calculus.
- Use the theorem to find speeds and unknown work, and state what it cannot tell us.
Work and energy are linked by one of the most useful results in mechanics. It lets us find speeds without knowing how long a force acted, and find the work done by forces we cannot measure directly, such as air resistance.
From kinematics to the work-energy theorem
For constant acceleration along a line, v² − u² = 2as. Multiply both sides by m/2: ½mv² − ½mu² = mas = Fs, using F = ma. In three dimensions, v² − u² = 2a·d, so ½mv² − ½mu² = ma·d = F·d. The quantity ½mv² is called the kinetic energy K, and F·d is the work W done by the net force. So:
Work-energy theorem: the change in kinetic energy of a particle equals the work done on it by the net force, K_f − K_i = W_net.
Kinetic energy
A body of mass m moving with speed v has kinetic energy K = ½mv² = ½m(v·v). It is a scalar, measured in joules, and never negative. It measures the work a body can do by virtue of its motion: a flowing stream can turn a mill wheel, the wind can drive a sailing ship. Since K depends on v², doubling the speed makes the kinetic energy four times as large. In terms of momentum, K = p²/(2m).
Work done by a variable force
Most real forces vary. For a force F(x) along x, over a tiny displacement Δx the force is nearly constant, so ΔW ≈ F(x)Δx, the area of a thin rectangle under the F-x graph. Adding all such strips from xᵢ to x_f and letting Δx → 0 gives the exact work: W = ∫ F(x) dx (from xᵢ to x_f), which is the area under the force-displacement graph. Areas below the x-axis (force opposite to displacement) count as negative work.
Work done by a varying force
- Split the path Divide the displacement into many small steps Δx.
- Treat F as constant on each step Work on each step ≈ F(x) Δx, a thin strip of area.
- Add the strips Total work ≈ Σ F(x) Δx.
- Take the limit Δx → 0 W = ∫ F dx = area under the F-x graph.
The theorem for a variable force
In one dimension, the rate of change of kinetic energy is dK/dt = d(½mv²)/dt = m v dv/dt = (ma)v = F v = F dx/dt. Multiplying by dt: dK = F dx. Integrating from xᵢ to x_f: K_f − K_i = ∫ F dx = W. So the theorem holds for any force. It is an integrated form of Newton's second law. Two cautions: it is a scalar equation, so it loses direction information; and it integrates over the motion, so it does not tell us how long the motion took. For those we still need the second law.
Worked example 1: a raindrop and air resistance
A raindrop of mass 2.0 g falls from rest through a height of 500 m and reaches the ground at 10 m s⁻¹. Find the work done by gravity and by air resistance (g = 9.8 m s⁻²). Step 1: ΔK = ½ × 0.0020 × 10² − 0 = 0.10 J. Step 2: work by gravity W_g = mgh = 0.0020 × 9.8 × 500 = 9.8 J. Step 3: by the theorem, ΔK = W_g + W_r, so W_r = 0.10 − 9.8 = −9.7 J. Air resistance removes almost all the energy gravity supplies, which is why raindrops fall gently.
Worked example 2: a bullet through a plank
A 20 g bullet moving at 300 m s⁻¹ passes through a plank 5.0 cm thick and emerges with 25% of its initial kinetic energy. Find its exit speed and the average resistive force. Step 1: K_i = ½ × 0.020 × 300² = 900 J; K_f = 0.25 × 900 = 225 J. Step 2: ½ × 0.020 × v² = 225 gives v² = 22500, so v = 150 m s⁻¹. Losing 75% of its energy only halves its speed, because K ∝ v². Step 3: W = K_f − K_i = −675 J = −F × 0.050, so the average resistive force F = 675/0.050 = 1.35 × 10⁴ N.
Worked example 3: area under an F-x graph
A force on a 1.0 kg body at rest rises steadily from 0 to 20 N over the first 4.0 m, then stays at 20 N for the next 2.0 m. Work: triangle ½ × 4.0 × 20 = 40 J plus rectangle 2.0 × 20 = 40 J, total 80 J. Speed: ½ × 1.0 × v² = 80, so v = √160 ≈ 12.6 m s⁻¹. With calculus: a force F = 3x² N from x = 0 to 2.0 m does W = [x³] from 0 to 2 = 8.0 J of work.
Key takeaways
- K = ½mv²; doubling speed quadruples kinetic energy.
- W_net = K_f − K_i holds for constant and variable forces alike.
- Work by a variable force is ∫F dx, the signed area under the F-x graph.
- The theorem is a scalar, time-free shortcut; it does not replace F = ma.
Check your understanding
-
1. The speed of a body is doubled. Its kinetic energy becomes:
- double
- four times
- half
- unchanged
Show answer
Answer: B. K = ½mv². If v becomes 2v, K becomes ½m(2v)² = 4 × ½mv², i.e. four times as large.
-
2. A 2.0 kg body at rest is acted on by a net force that does 36 J of work. Its final speed is:
- 18 m s⁻¹
- 36 m s⁻¹
- 3.0 m s⁻¹
- 6.0 m s⁻¹
Show answer
Answer: D. By the work-energy theorem, ½ × 2.0 × v² − 0 = 36, so v² = 36 and v = 6.0 m s⁻¹.
-
3. A force F = 2x newton (x in metres) acts on a body along x. The work done as it moves from x = 1 m to x = 3 m is:
- 8 J
- 4 J
- 6 J
- 9 J
Show answer
Answer: A. W = ∫ 2x dx from 1 to 3 = [x²] from 1 to 3 = 9 − 1 = 8 J.
-
4. A 0.50 kg ball thrown up at 20 m s⁻¹ rises to a height of 15 m (g = 9.8 m s⁻²). The work done by air resistance during the rise is about:
- −73.5 J
- +26.5 J
- −26.5 J
- −100 J
Show answer
Answer: C. ΔK = 0 − ½ × 0.50 × 20² = −100 J. Work by gravity = −mgh = −0.50 × 9.8 × 15 = −73.5 J. W_air = ΔK − W_g = −100 − (−73.5) = −26.5 J.
-
5. Assertion (A): The work-energy theorem cannot tell us how long it takes a body to reach a certain speed. Reason (R): The theorem is obtained by integrating Newton's second law over displacement, so information about time is not kept.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: A. Both are true. K_f − K_i = ∫F dx relates speeds to work along the path but contains no time variable; finding times requires the second law in its F = ma form. R explains A.
Sign in to keep track of the lessons you finish.