• Foundation
  • About 20 min
  • 5 practice questions

Potential energy of a spring, and power

Use Hooke's law to find the work done by a spring and its potential energy ½kx², apply energy conservation to spring systems, and calculate power as dW/dt = F·v.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State Hooke's law F = −kx and explain the spring constant.
  • Derive the work done by a spring force, −½kx², and the potential energy V = ½kx².
  • Show that the spring force is conservative and find the maximum speed of an oscillating block.
  • Define average and instantaneous power, and show that P = F·v.
  • Use the watt, horse-power and kilowatt hour correctly.

Springs store energy in shock absorbers, mattresses, toy guns and car-crash test rigs. Their force varies with stretch, which makes them a perfect example of a variable, conservative force. The second half of this lesson asks how fast work is done: that rate is power.

Hooke's law and the work done by a spring

A light spring is fixed to a wall at one end and attached to a block on a smooth table at the other. If the block is displaced by x from the equilibrium (unstretched) position, the spring pulls it back with force Fₛ = −kx (Hooke's law). k is the spring constant (N m⁻¹): a stiff spring has a large k. The minus sign means the force always points back towards x = 0: for a stretch (x > 0) the force is negative; for a compression (x < 0) it is positive.

Stretching the block from 0 to xₘ, the work done by the spring force is Wₛ = ∫ −kx dx (from 0 to xₘ) = −½kxₘ². This is the area of the triangle under the Fₛ-x graph, negative because force and displacement are opposite. The external force that slowly stretches the spring does +½kxₘ². For a compression the results are the same. Moving the block from xᵢ to x_f, the spring does Wₛ = ½kxᵢ² − ½kx_f², which depends only on the end points; round any closed path it is zero. So the spring force is conservative, and we can define its potential energy, zero at the unstretched length:

Spring potential energy V(x) = ½kx², for a stretch or compression x. Check: −dV/dx = −kx, the spring force.

Energy of an oscillating block

If the block is pulled to xₘ and released from rest on a smooth surface, its mechanical energy is conserved: ½mv² + ½kx² = ½kxₘ² at every point between −xₘ and +xₘ. Kinetic energy is greatest where potential energy is zero, at x = 0: ½mvₘ² = ½kxₘ², so vₘ = xₘ√(k/m). (k/m has dimensions [T⁻²], so the equation is dimensionally correct.) As the block moves, potential and kinetic energy trade places, one parabola rising as the other falls, while their sum stays fixed.

Energy exchange in a block-spring system

  1. Released at x = +xₘ All energy is spring potential energy ½kxₘ².
  2. Passing x = 0 All kinetic energy; speed is maximum, xₘ√(k/m).
  3. At x = −xₘ Momentarily at rest; all potential energy again.
  4. Back through x = 0 Kinetic energy maximum again, moving the other way.

Then back to step 1: Released at x = +xₘ

Worked example 1: a spring launcher

A spring of k = 400 N m⁻¹ is compressed by 0.10 m and launches a 0.50 kg block along a smooth floor. Stored energy: V = ½ × 400 × 0.10² = 2.0 J. Launch speed: ½ × 0.50 × v² = 2.0, so v² = 8.0 and v ≈ 2.8 m s⁻¹. The formula vₘ = xₘ√(k/m) = 0.10 × √800 ≈ 2.8 m s⁻¹ agrees.

Worked example 2: a crash-test spring

In a crash test, a car of mass 800 kg moving at 36 km h⁻¹ on a smooth road hits a mounted spring of k = 2.0 × 10⁴ N m⁻¹. Find the maximum compression. Step 1: v = 10 m s⁻¹, so K = ½ × 800 × 10² = 4.0 × 10⁴ J. Step 2: at maximum compression all of this is spring energy: ½kxₘ² = 4.0 × 10⁴, so xₘ² = 8.0 × 10⁴/2.0 × 10⁴ = 4.0 and xₘ = 2.0 m. With friction present the compression would be less, and we would use the work-energy theorem with friction's (negative) work included. Energy methods give the compression but not the time it takes.

Power

Climbing four floors is not hard; climbing them quickly is. Power is the rate at which work is done or energy is transferred. Average power P_av = W/t. Instantaneous power P = dW/dt. Since dW = F·dr, P = F·dr/dt, so P = F·v. Power is a scalar with dimensions [M L² T⁻³]. Its SI unit is the watt (W): 1 W = 1 J s⁻¹. Engines are still often rated in horse-power: 1 hp = 746 W. Electricity is sold by the kilowatt hour, which is a unit of energy, not power: 1 kWh = 1000 W × 3600 s = 3.6 × 10⁶ J. A 100 W bulb used for 10 h consumes 1 kWh.

P = dW/dt = F·v. 1 W = 1 J s⁻¹; 1 hp = 746 W; 1 kWh = 3.6 × 10⁶ J (energy).

Worked example 3: power of a lift motor

A lift of total mass 1200 kg moves up at a steady 1.5 m s⁻¹ against a friction force of 3000 N (g = 9.8 m s⁻²). Find the minimum power of the motor. At constant speed, the motor's force must balance gravity and friction: F = mg + f = 1200 × 9.8 + 3000 = 11760 + 3000 = 14760 N. Power P = Fv = 14760 × 1.5 = 22140 W ≈ 22 kW, which is 22140/746 ≈ 30 hp.

Worked example 4: climbing stairs and paying for energy

A 60 kg student climbs stairs 10 m high in 15 s. Work against gravity = mgh = 60 × 9.8 × 10 = 5880 J, so average power = 5880/15 = 392 W. A 1.5 kW heater used for 2.0 h consumes 1.5 × 2.0 = 3.0 kWh = 3.0 × 3.6 × 10⁶ = 1.08 × 10⁷ J.

Key takeaways

  • Hooke's law F = −kx; the spring stores V = ½kx² and is a conservative force.
  • In a block-spring system K + ½kx² is constant; maximum speed xₘ√(k/m) at x = 0.
  • Power P = dW/dt = F·v, in watts; 1 hp = 746 W.
  • The kWh measures energy: 1 kWh = 3.6 × 10⁶ J.

Check your understanding

  1. 1. A spring of spring constant 500 N m⁻¹ is stretched by 4.0 cm. The potential energy stored in it is:

    1. 0.40 J
    2. 20 J
    3. 4.0 J
    4. 0.80 J
    Show answer

    Answer: A. V = ½kx² = ½ × 500 × (0.040)² = 250 × 0.0016 = 0.40 J.

  2. 2. A spring's extension is doubled. The potential energy stored in it becomes:

    1. double
    2. half
    3. four times
    4. unchanged
    Show answer

    Answer: C. V = ½kx² depends on x². Doubling x multiplies V by 2² = 4.

  3. 3. A machine does 6000 J of work in 2.0 minutes. Its average power is:

    1. 3000 W
    2. 100 W
    3. 12000 W
    4. 50 W
    Show answer

    Answer: D. P = W/t = 6000 J/(2.0 × 60 s) = 6000/120 = 50 W.

  4. 4. A car engine provides a forward force of 2000 N while the car moves at a steady 25 m s⁻¹. The power delivered is:

    1. 50 kW
    2. 80 W
    3. 2000 W
    4. 5.0 kW
    Show answer

    Answer: A. P = Fv = 2000 × 25 = 50000 W = 50 kW.

  5. 5. Assertion (A): The kilowatt hour is a unit of power. Reason (R): 1 kWh = 3.6 × 10⁶ J.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: D. A is false: the kilowatt hour is power × time, which is energy, as R shows. R is true: 1000 W × 3600 s = 3.6 × 10⁶ J.

Privacy · Terms · Refunds · Delivery