• Foundation
  • About 20 min
  • 5 practice questions

The scalar product and work done by a constant force

Multiply vectors with the scalar (dot) product, define the work done by a constant force as W = F·d, and decide when work is positive, negative or zero.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define the scalar product A·B = AB cos θ and state its properties.
  • Calculate a scalar product from components and use it to find the angle between vectors.
  • Define work done by a constant force and give its SI unit and dimensions.
  • Decide whether the work done by a force is positive, negative or zero.
  • Explain why the work done on A by B need not equal minus the work done on B by A.

In everyday speech, a student revising for hours or a guard standing all day is 'working hard'. In physics, work has a precise meaning: it is done only when a force acts on a body that moves, and only the part of the force along the motion counts. To express that idea we first need a way of multiplying two vectors that gives a scalar.

The scalar (dot) product

The scalar product of vectors A and B is A·B = AB cos θ, where θ is the angle between them. The result is a scalar, with no direction. Geometrically, B cos θ is the projection of B on A, so A·B is the magnitude of A times the component of B along A (or the other way round). Properties: it is commutative, A·B = B·A; it is distributive, A·(B + C) = A·B + A·C; and A·(λB) = λ(A·B).

For unit vectors, î·î = ĵ·ĵ = k̂·k̂ = 1 (angle 0) and î·ĵ = ĵ·k̂ = k̂·î = 0 (angle 90°). Hence, in components, A·B = AₓBₓ + A_yB_y + A_zB_z. Two useful results follow: A·A = A² = Aₓ² + A_y² + A_z², and A·B = 0 when A and B are perpendicular (and both are non-zero).

A·B = AB cos θ = AₓBₓ + A_yB_y + A_zB_z. A·B = 0 for perpendicular vectors.

Worked example 1: angle between force and displacement

Find the angle between F = (2î + 2ĵ + k̂) N and d = (2î − ĵ + 2k̂) m, and the projection of F on d. Step 1: F·d = (2)(2) + (2)(−1) + (1)(2) = 4 − 2 + 2 = 4. Step 2: F = √(4 + 4 + 1) = 3 N and d = √(4 + 1 + 4) = 3 m. Step 3: cos θ = 4/(3 × 3) = 4/9 ≈ 0.444, so θ ≈ 64°. Step 4: projection of F on d = F·d/d = 4/3 ≈ 1.33 N. The work done by this force over this displacement is 4 J.

Work done by a constant force

If a constant force F acts on a body that undergoes displacement d, the work done by the force is the component of the force along the displacement times the magnitude of the displacement: W = (F cos θ) d = F·d. Work is a scalar. Its dimensions are [M L² T⁻²], the same as energy, and its SI unit is the joule (J): 1 J = 1 N m, the work done when a force of 1 N moves its point of application 1 m along the force. Other units met in practice are the erg (10⁻⁷ J), the electron volt (1.6 × 10⁻¹⁹ J), the calorie (about 4.2 J) and the kilowatt hour (3.6 × 10⁶ J).

Positive, negative and zero work

The sign of work depends on the angle θ between F and d

  • Positive work (0° ≤ θ < 90°)
    • Force has a component along the motion
    • Example: pulling a trolley forward
    • Example: gravity on a falling ball
  • Zero work (θ = 90°, or d = 0, or F = 0)
    • Pushing a fixed wall: no displacement
    • Holding a load still: no displacement
    • Gravity on a body sliding on a level floor
    • Centripetal force in uniform circular motion
  • Negative work (90° < θ ≤ 180°)
    • Force opposes the motion
    • Friction on a sliding block (θ = 180°)
    • Gravity on a ball thrown upward

You may get tired holding a heavy bag still, or pushing against a wall, because your muscles keep contracting and relaxing and use up internal energy. But on the bag or the wall no work is done, because there is no displacement. Likewise, if the Moon's orbit is taken as a circle, the Earth's pull on it is always perpendicular to its displacement and does no work.

Worked example 2: pulling at an angle

A child pulls a toy cart with a force of 50 N along a string at 60° above the horizontal, moving it 10 m along a level floor. The work done by the pull is W = Fd cos θ = 50 × 10 × cos 60° = 50 × 10 × 0.5 = 250 J. Only the horizontal component, 25 N, does work; the vertical component is perpendicular to the motion and does none.

Worked example 3: braking by friction

A scooter skids to a stop over 15 m while the road exerts a friction force of 300 N on it, opposite to its motion. (a) Work done by the road on the scooter: θ = 180°, so W = 300 × 15 × cos 180° = −4500 J. This negative work is what removes the scooter's kinetic energy. (b) Work done by the scooter on the road: by the third law the scooter pushes the road with 300 N, but the road does not move, so this work is zero. Equal and opposite forces need not do equal and opposite work.

Key takeaways

  • A·B = AB cos θ is a scalar; in components it is AₓBₓ + A_yB_y + A_zB_z.
  • Work W = F·d = Fd cos θ, measured in joules; dimensions [M L² T⁻²].
  • No work is done if the displacement is zero, the force is zero or they are perpendicular.
  • Friction usually does negative work; third-law partners need not do equal work.

Check your understanding

  1. 1. The scalar product of A = 3î + 4ĵ and B = 2î − 5ĵ is:

    1. 26
    2. −14
    3. 14
    4. −26
    Show answer

    Answer: B. A·B = AₓBₓ + A_yB_y = (3)(2) + (4)(−5) = 6 − 20 = −14. The negative value means the angle between them is more than 90°.

  2. 2. For what value of a are the vectors 2î + aĵ and 3î − 2ĵ perpendicular?

    1. 3
    2. −3
    3. 2
    4. 6
    Show answer

    Answer: A. Perpendicular vectors have zero scalar product: (2)(3) + (a)(−2) = 6 − 2a = 0, so a = 3.

  3. 3. A force of 20 N moves a body 5.0 m, the force making 60° with the displacement. The work done is:

    1. 100 J
    2. 86.6 J
    3. 25 J
    4. 50 J
    Show answer

    Answer: D. W = Fd cos θ = 20 × 5.0 × cos 60° = 100 × 0.5 = 50 J.

  4. 4. In which case is the work done by the stated force zero?

    1. Friction on a box sliding across a floor
    2. Gravity on an apple falling from a tree
    3. The tension in a string whirling a stone in a horizontal circle at constant speed
    4. The pull of a horse on a moving cart
    Show answer

    Answer: C. In uniform circular motion the string's tension points to the centre, always perpendicular to the stone's displacement along the circle, so cos 90° = 0 and no work is done. Friction does negative work; gravity on a falling apple and the horse's pull do positive work.

  5. 5. Assertion (A): A man holding a heavy suitcase steadily at a fixed height does no work on the suitcase. Reason (R): Work is done on a body only if the point of application of the force has a displacement with a component along the force.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: A. Both are true. The suitcase does not move, so the displacement is zero and W = F·d = 0 even though the force is large. The man tires because his muscles use internal energy, not because he does work on the suitcase. R explains A.

Privacy · Terms · Refunds · Delivery