- Foundation
- About 22 min
- 5 practice questions
Potential energy and the conservation of mechanical energy
Define potential energy for conservative forces, use V = mgh and F = −dV/dx, apply conservation of mechanical energy, and account for work done by non-conservative forces.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain potential energy as stored energy of position or configuration.
- Show that gravitational potential energy near the Earth is mgh and that F = −dV/dx.
- State three equivalent tests of a conservative force.
- Derive and apply the principle of conservation of mechanical energy.
- Use E_f − E_i = W_nc when friction or other non-conservative forces act.
A stretched bowstring, water held behind a dam, a book on a high shelf: each can release energy later because of where it is or how it is arranged. This stored energy is potential energy. When the body is released, the stored energy appears as kinetic energy.
Gravitational potential energy
Near the Earth's surface (heights small compared with the Earth's radius), the gravitational force on a mass m is mg downward, nearly constant. Raising a ball slowly through height h, an external agent does work mgh against gravity. This work is stored as gravitational potential energy, V(h) = mgh, measured from the level we choose as zero. Equivalently, V(h) is the negative of the work done by gravity in raising the ball. Note that dV/dh = mg, so the force is F = −dV/dh = −mg: the minus sign shows the force is downward, towards lower potential energy. When the ball is released from height h, v² = 2gh, i.e. ½mv² = mgh: the stored potential energy has become kinetic energy.
Conservative forces
Potential energy can be defined only for forces whose work is 'stored' and can be fully recovered. For such a force in one dimension, F(x) = −dV/dx, and the change in potential energy is the negative of the work done by the force: ΔV = −F(x)Δx. A force is conservative if any of these equivalent statements holds: (1) it can be written as F = −dV/dx; (2) the work it does depends only on the initial and final positions, not on the path; (3) the work it does around any closed path is zero. Gravity and the spring force are conservative. Friction is not: the work it does depends on the length of the path, and it is never recovered as mechanical energy.
A consequence: a body sliding from rest down a smooth incline of height h reaches the bottom with speed √(2gh), whatever the angle of the slope, because gravity's work mgh depends only on the drop in height.
Conservation of mechanical energy
Let a conservative force F act over a small displacement Δx. By the work-energy theorem ΔK = FΔx, and by the definition of potential energy ΔV = −FΔx. Adding: ΔK + ΔV = 0, so K + V = constant. Between any two points, Kᵢ + V(xᵢ) = K_f + V(x_f). The sum E = K + V is the total mechanical energy.
If only conservative forces do work, the total mechanical energy K + V of a system stays constant.
Energy changes of a ball tossed up and caught (no air resistance)
- Launch All kinetic energy, ½mv₀²; potential energy taken as zero.
- Rising Kinetic energy turns into potential energy mgh.
- Top All potential energy, mgh_max; kinetic energy zero.
- Falling Potential energy turns back into kinetic energy.
Then back to step 1: Launch
If a ball of mass m is dropped from height H: at H, E = mgH (all potential); at height h, E = mgh + ½mv²; at the ground, E = ½mv_f². Equating gives v_f = √(2gH) and, at height h, v² = 2g(H − h), the same results as kinematics, obtained without any reference to time.
When non-conservative forces act
If a non-conservative force such as friction also acts, the work-energy theorem gives (F_c + F_nc)Δx = ΔK, and F_cΔx = −ΔV, so Δ(K + V) = F_ncΔx. Over the whole path: E_f − E_i = W_nc, the work done by the non-conservative forces. Friction makes W_nc negative, so mechanical energy decreases; the lost energy appears as heat and sound. Note that the zero of potential energy is arbitrary, but once chosen it must be kept throughout a problem.
Worked example 1: a falling ball
A 0.50 kg ball is dropped from a height of 20 m (g = 9.8 m s⁻²; ground as zero). At 20 m: E = mgH = 0.50 × 9.8 × 20 = 98 J. At 5.0 m: V = 0.50 × 9.8 × 5.0 = 24.5 J, so K = 98 − 24.5 = 73.5 J and v = √(2 × 73.5/0.50) = √294 ≈ 17.1 m s⁻¹. At the ground: K = 98 J, so v = √(2 × 98/0.50) = √392 ≈ 19.8 m s⁻¹.
Worked example 2: a bob in a vertical circle
A bob on a light string of length L is given a horizontal speed v₀ at the lowest point A and just completes the upper half of a vertical circle, the string going slack only at the top C. The tension does no work (it is always perpendicular to the motion), so mechanical energy is conserved. At C: tension is zero, so gravity alone supplies the centripetal force: mg = mv_C²/L, giving v_C = √(gL). Energy A to C (A as zero, C at height 2L): ½mv₀² = ½mv_C² + mg(2L) = ½mgL + 2mgL = (5/2)mgL, so v₀ = √(5gL). At B (level with the centre, height L): ½mv_B² = ½mv₀² − mgL = (3/2)mgL, so v_B = √(3gL). Then K_B/K_C = 3gL/gL = 3. For L = 0.50 m, v₀ = √(5 × 9.8 × 0.50) ≈ 4.9 m s⁻¹.
Worked example 3: sliding down a rough slope
A 2.0 kg block slides from rest down a rough slope from a height of 3.0 m and reaches the bottom at 6.0 m s⁻¹. How much work did friction do? E_i = mgh = 2.0 × 9.8 × 3.0 = 58.8 J; E_f = ½ × 2.0 × 6.0² = 36 J. W_nc = E_f − E_i = 36 − 58.8 = −22.8 J. On a smooth slope the block would have arrived at √(2 × 9.8 × 3.0) ≈ 7.7 m s⁻¹.
Key takeaways
- Potential energy is stored energy of position or configuration; near Earth, V = mgh.
- For a conservative force F = −dV/dx, and its work is path-independent (zero round a closed path).
- With only conservative forces, K + V = constant.
- With friction, E_f − E_i = W_nc, which is negative.
Check your understanding
-
1. A 2.0 kg stone is lifted slowly through 5.0 m. Taking g = 9.8 m s⁻², the increase in its gravitational potential energy is:
- 10 J
- 98 J
- 49 J
- 196 J
Show answer
Answer: B. ΔV = mgh = 2.0 × 9.8 × 5.0 = 98 J.
-
2. A body slides from rest down a smooth curved track from a height of 5.0 m. Taking g = 9.8 m s⁻², its speed at the bottom is about:
- 9.9 m s⁻¹
- 49 m s⁻¹
- 7.0 m s⁻¹
- Cannot be found without the shape of the track
Show answer
Answer: A. Gravity is conservative and the track is smooth (the normal force does no work), so mgh = ½mv²: v = √(2gh) = √(2 × 9.8 × 5.0) = √98 ≈ 9.9 m s⁻¹, whatever the shape of the track.
-
3. Which of these forces is non-conservative?
- The gravitational force
- The force of an ideal spring
- Kinetic friction
- The electrostatic force between charges
Show answer
Answer: C. The work done by kinetic friction depends on the length of the path and is never recovered as mechanical energy; round a closed path it is negative, not zero. Gravity, spring and electrostatic forces are conservative.
-
4. A bob on a string of length 0.90 m is to just complete a vertical circle. Taking g = 10 m s⁻², the minimum speed needed at the lowest point is:
- 3.0 m s⁻¹
- 4.2 m s⁻¹
- 9.0 m s⁻¹
- 6.7 m s⁻¹
Show answer
Answer: D. The minimum speed at the lowest point is v₀ = √(5gL) = √(5 × 10 × 0.90) = √45 ≈ 6.7 m s⁻¹.
-
5. Assertion (A): The work done by gravity on a body moving from one point to another does not depend on the path followed. Reason (R): Gravity is a conservative force.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: A. Both are true. A conservative force is one whose work depends only on the end points; gravity is such a force, so its work is path-independent. R explains A.
Sign in to keep track of the lessons you finish.