Revision notes

Chapter 6 System of Particles and Rotational Motion: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Rigid bodies, kinds of motion and the centre of mass

How a rigid body can move

  • Pure translation
    • All particles have the same velocity
    • Example: a block sliding without turning
  • Rotation about a fixed axis
    • Each particle moves in a circle centred on the axis
    • Example: ceiling fan, potter's wheel
  • Rotation about a fixed point
    • Axis passes through the fixed point but moves
    • Example: spinning top, oscillating pedestal fan
  • Translation + rotation
    • Body not fixed anywhere
    • Example: a cylinder rolling down a slope

R = Σmᵢrᵢ / M; for a continuous body R = (1/M) ∫ r dm.

  • A free rigid body can translate, rotate, or do both; a body fixed on a line can only rotate.
  • R = Σmᵢrᵢ/M: the centre of mass is a mass-weighted average position.
  • Uniform symmetric bodies have their centre of mass at the geometric centre.
  • For composite bodies, combine the centres of mass of the parts; subtract for holes.
Read the full lesson

Lesson 2

Motion of the centre of mass, momentum of a system and the vector product

M A = F_ext: the centre of mass moves as if the whole mass were concentrated there and all external forces acted at that point.

Scalar product versus vector product

  • Scalar (dot) product a·b
    • Result is a scalar: ab cos θ
    • Commutative: a·b = b·a
    • Zero when a ⟂ b
    • Used for work, power
  • Vector (cross) product a × b
    • Result is a vector: magnitude ab sin θ
    • Anti-commutative: a × b = −b × a
    • Zero when a ∥ b (including a × a = 0)
    • Used for torque, angular momentum, v = ω × r

a × b = (a_yb_z − a_zb_y) î + (a_zbₓ − aₓb_z) ĵ + (aₓb_y − a_ybₓ) k̂, the determinant with rows (î ĵ k̂), (aₓ a_y a_z), (bₓ b_y b_z).

  • MA = F_ext: internal forces never affect the motion of the centre of mass.
  • P = MV and dP/dt = F_ext; with no external force P and V are constant.
  • a × b has magnitude ab sin θ, is perpendicular to both, and follows the right-hand rule.
  • a × b = −b × a; î × ĵ = k̂ in cyclic order.
Read the full lesson

Lesson 3

Angular velocity, torque and angular momentum

τ = r × F, l = r × p, dL/dt = τ_ext. If τ_ext = 0, L is constant (conservation of angular momentum).

Translational quantities and their rotational partners

  • Translation
    • Velocity v
    • Force F
    • Linear momentum p = mv
    • F = dp/dt
    • If F_ext = 0, P is constant
  • Rotation
    • Angular velocity ω (v = ω × r)
    • Torque τ = r × F
    • Angular momentum l = r × p
    • τ = dl/dt
    • If τ_ext = 0, L is constant
  • All particles of a rotating rigid body share one ω; each has v = ωr⊥.
  • Torque τ = r × F = r⊥F: the moment arm matters as much as the force.
  • Angular momentum l = r × p; dl/dt = τ, and for a system dL/dt = τ_ext.
  • Zero external torque means constant angular momentum.
Read the full lesson

Lesson 4

Equilibrium of a rigid body, moments and centre of gravity

Equilibrium of a rigid body: ΣF = 0 and Στ = 0. Lever: load × load arm = effort × effort arm; M.A. = d₂/d₁.

Solving a rigid-body equilibrium problem

  1. Draw all external forces Weight at the centre of gravity, reactions, loads, friction.
  2. Resolve forces Set ΣFₓ = 0 and ΣF_y = 0.
  3. Choose a point for moments Pick a point where an unknown force acts, so it drops out.
  4. Set Στ = 0 and solve Take anticlockwise moments as positive, clockwise as negative.
  • A rigid body needs both ΣF = 0 and Στ = 0 to be in equilibrium.
  • A couple has zero net force but a turning effect F × d, the same about every point.
  • Principle of moments: load × load arm = effort × effort arm.
  • Centre of gravity = centre of mass when g is uniform over the body.
Read the full lesson

Lesson 5

Moment of inertia and the dynamics of rotation about a fixed axis

Moments of inertia of some uniform bodies (M = mass)
BodyAxisMoment of inertia
Thin ring, radius RPerpendicular to plane, through centreMR²
Thin ring, radius RA diameterMR²/2
Thin rod, length LPerpendicular to rod, through midpointML²/12
Disc, radius RPerpendicular to disc, through centreMR²/2
Disc, radius RA diameterMR²/4
Hollow cylinder, radius RAxis of cylinderMR²
Solid cylinder, radius RAxis of cylinderMR²/2
Solid sphere, radius RA diameter2MR²/5

τ = Iα: Newton's second law for rotation about a fixed axis. Also K = ½Iω², W = τθ, P = τω, L = Iω.

A spinning skater and constant angular momentum

  1. Arms stretched out Large I, small ω.
  2. Arms pulled in I decreases, so ω increases (Iω unchanged).
  3. Fast spin Small I, large ω.
  4. Arms out again I increases and the spin slows.

Then back to step 1: Arms stretched out

The translation-rotation analogy
TranslationRotation about a fixed axis
Displacement xAngular displacement θ
Velocity v = dx/dtAngular velocity ω = dθ/dt
Acceleration a = dv/dtAngular acceleration α = dω/dt
Mass mMoment of inertia I
Force F = maTorque τ = Iα
Work dW = F dsWork dW = τ dθ
Kinetic energy ½mv²Kinetic energy ½Iω²
Power P = FvPower P = τω
Momentum p = mvAngular momentum L = Iω
  • I = Σmr² depends on the mass and on how far it lies from the axis; K = ½Iω².
  • Rotational kinematics copies linear kinematics with θ, ω, α.
  • τ = Iα, W = τθ, P = τω.
  • With no external torque about the axis, Iω stays constant.
Read the full lesson

Privacy · Terms · Refunds · Delivery