• Foundation
  • About 22 min
  • 5 practice questions

Equilibrium of a rigid body, moments and centre of gravity

Apply the two conditions of equilibrium of a rigid body, explain couples and the principle of moments for levers, and locate the centre of gravity of a body.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the conditions for translational and rotational equilibrium of a rigid body.
  • Explain partial equilibrium and the couple, and show the moment of a couple is the same about every point.
  • Use the principle of moments for a lever and find mechanical advantage.
  • Define the centre of gravity and explain when it coincides with the centre of mass.
  • Solve problems on beams and ladders using both equilibrium conditions.

Bridges, shelves, ladders, balances and see-saws stay put because the forces and the torques on them balance. For a particle, balancing forces is enough. For an extended body, the forces must also not twist it.

Conditions of equilibrium

A rigid body is in mechanical equilibrium when neither its linear momentum nor its angular momentum changes: it has no linear and no angular acceleration. This needs two conditions. (1) Translational equilibrium: the vector sum of external forces is zero, ΣF = 0. (2) Rotational equilibrium: the vector sum of external torques is zero, Στ = 0. Each is a vector equation, giving six scalar conditions in all. When all forces lie in one plane, three are enough: ΣFₓ = 0, ΣF_y = 0, and Στ = 0 about any axis perpendicular to the plane. If ΣF = 0, the torque condition gives the same result about every point, so we may take moments about whichever point is most convenient, usually one where an unknown force acts.

Partial equilibrium and the couple

A body can be in one kind of equilibrium but not the other. Two equal parallel forces in the same direction at the ends of a light rod give equal and opposite torques about its middle: rotational equilibrium, but the net force is not zero. Reverse one force and the net force is zero, but both torques now turn the rod the same way: translational equilibrium without rotational equilibrium. A pair of equal and opposite forces with different lines of action is a couple; it produces rotation without translation. Turning a bottle cap and the twisting of a compass needle in the Earth's magnetic field are couples. The moment of a couple is (r₂ − r₁) × F = AB × F, which does not depend on the origin; its magnitude is F × d, where d is the perpendicular distance between the two forces.

The principle of moments

A lever is a light rod pivoted at a point, the fulcrum. Let a load F₁ act at distance d₁ (the load arm) and an effort F₂ at distance d₂ (the effort arm), and let R be the reaction at the fulcrum. Translational equilibrium: R = F₁ + F₂. Rotational equilibrium (moments about the fulcrum, where R has zero moment): d₁F₁ = d₂F₂, i.e. load × load arm = effort × effort arm. This is the principle of moments. The mechanical advantage is M.A. = F₁/F₂ = d₂/d₁; if the effort arm is longer than the load arm, a small effort lifts a large load. A see-saw, the beam of a balance and a crowbar are levers.

Equilibrium of a rigid body: ΣF = 0 and Στ = 0. Lever: load × load arm = effort × effort arm; M.A. = d₂/d₁.

Centre of gravity

A piece of cardboard can be balanced horizontally on a pencil tip at one point G, its centre of gravity (CG). There the upward push of the tip balances the weight Mg, and the total torque of the gravitational forces on all the particles is zero: Σrᵢ × mᵢg = 0, with rᵢ measured from G. If g is the same everywhere on the body, it comes out of the sum, leaving Σmᵢrᵢ = 0, which is exactly the condition for the centre of mass. So in a uniform gravitational field the centre of gravity coincides with the centre of mass. For a body so large that g varies across it, they differ; in principle they are different ideas, since the centre of mass depends only on how mass is distributed. To find the CG of an irregular plate, hang it from a point and mark the vertical through that point; repeat from another point; the CG is where the lines cross.

Solving a rigid-body equilibrium problem

  1. Draw all external forces Weight at the centre of gravity, reactions, loads, friction.
  2. Resolve forces Set ΣFₓ = 0 and ΣF_y = 0.
  3. Choose a point for moments Pick a point where an unknown force acts, so it drops out.
  4. Set Στ = 0 and solve Take anticlockwise moments as positive, clockwise as negative.

Worked example 1: a loaded beam

A uniform beam 2.0 m long and of mass 10 kg rests on supports at its two ends A and B. A 20 kg load sits 0.50 m from A. Find the support forces (g = 9.8 m s⁻²). The beam's weight 98 N acts at its middle, 1.0 m from A; the load's weight is 196 N. Moments about A: R_B × 2.0 = 98 × 1.0 + 196 × 0.50 = 98 + 98 = 196, so R_B = 98 N. Forces: R_A + R_B = 98 + 196 = 294 N, so R_A = 196 N. The support nearer the load carries more, as expected.

Worked example 2: a ladder against a smooth wall

A uniform ladder 5.0 m long and of mass 10 kg leans against a smooth (frictionless) wall with its foot 3.0 m from the wall, so its top is 4.0 m up. Find the forces and the least coefficient of friction at the floor (g = 9.8 m s⁻²). Forces: weight W = 98 N at the midpoint (1.5 m horizontally from the foot); the wall's push F₁, horizontal; and at the floor a normal force N and friction f towards the wall. Vertical: N = 98 N. Horizontal: f = F₁. Moments about the foot: F₁ × 4.0 = 98 × 1.5, so F₁ = 147/4.0 ≈ 36.8 N, and hence f ≈ 36.8 N. Friction needed: μ ≥ f/N = 36.8/98 ≈ 0.38.

Worked example 3: a see-saw

A 30 kg child sits 2.0 m from the pivot of a see-saw. Where must a 40 kg child sit on the other side to balance it? By the principle of moments, 30g × 2.0 = 40g × d, so d = 60/40 = 1.5 m. (g cancels.)

Key takeaways

  • A rigid body needs both ΣF = 0 and Στ = 0 to be in equilibrium.
  • A couple has zero net force but a turning effect F × d, the same about every point.
  • Principle of moments: load × load arm = effort × effort arm.
  • Centre of gravity = centre of mass when g is uniform over the body.

Check your understanding

  1. 1. A couple acting on a rigid body produces:

    1. only translation
    2. only rotation
    3. both translation and rotation
    4. neither translation nor rotation
    Show answer

    Answer: B. The two forces of a couple are equal and opposite, so the net force is zero (no translation), but they have different lines of action, so their torques add (rotation).

  2. 2. On a lever, a load of 600 N is 0.20 m from the fulcrum. The effort needed at 1.2 m from the fulcrum on the other side is:

    1. 3600 N
    2. 120 N
    3. 720 N
    4. 100 N
    Show answer

    Answer: D. Principle of moments: 600 × 0.20 = F × 1.2, so 120 = 1.2F and F = 100 N. The mechanical advantage is 1.2/0.20 = 6.

  3. 3. A uniform metre rule is balanced at the 50 cm mark. A 20 g mass is hung at the 10 cm mark. Where must a 40 g mass be hung to restore balance?

    1. 70 cm mark
    2. 90 cm mark
    3. 30 cm mark
    4. 80 cm mark
    Show answer

    Answer: A. The rule's own weight acts at the pivot. Moment of the 20 g mass = 20 × (50 − 10) = 800 g cm. The 40 g mass needs 40 × d = 800, so d = 20 cm on the other side: the 70 cm mark.

  4. 4. Two forces of 10 N form a couple with their lines of action 0.40 m apart. The moment of the couple is:

    1. 25 N m
    2. 2.0 N m
    3. 4.0 N m
    4. 8.0 N m
    Show answer

    Answer: C. Moment of a couple = F × d = 10 × 0.40 = 4.0 N m, the same about any point.

  5. 5. Assertion (A): The centre of gravity of a tall mountain may not coincide with its centre of mass. Reason (R): The centre of gravity coincides with the centre of mass only when g has the same value over the whole body.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: A. Both are true. Across a very tall body g changes noticeably with height, so the point where the gravitational torques balance differs slightly from the centre of mass. R gives the condition that is not met, so R explains A.

Privacy · Terms · Refunds · Delivery