• Foundation
  • About 22 min
  • 5 practice questions

Motion of the centre of mass, momentum of a system and the vector product

Show that the centre of mass moves as if all external forces acted there, connect it with the total momentum and its conservation, and multiply vectors with the vector (cross) product.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Derive MA = F_ext for the centre of mass of a system of particles.
  • Show that the total momentum of a system is P = MV and that dP/dt = F_ext.
  • Apply conservation of momentum to explosions and decays using the centre of mass.
  • Define the vector product, use the right-hand rule, and state its properties.
  • Evaluate a × b in component (determinant) form.

Throw a hammer and its handle and head trace complicated loops in the air, yet one special point, the centre of mass, follows a smooth parabola. This lesson shows why, and introduces the vector product, the tool we need for torque and angular momentum.

Motion of the centre of mass

Start from MR = m₁r₁ + m₂r₂ + ... + mₙrₙ (masses constant). Differentiating with respect to time gives MV = m₁v₁ + m₂v₂ + ... + mₙvₙ, where V = dR/dt is the velocity of the centre of mass. Differentiating again: MA = m₁a₁ + m₂a₂ + ... = F₁ + F₂ + ... + Fₙ, where Fᵢ is the total force on the ith particle. Each Fᵢ contains external forces and internal forces from other particles of the system. By the third law, internal forces come in equal and opposite pairs, so they cancel in the sum. Therefore:

M A = F_ext: the centre of mass moves as if the whole mass were concentrated there and all external forces acted at that point.

No knowledge of internal forces is needed to find the motion of the centre of mass. This justifies treating extended bodies as particles in earlier chapters: we were really following their centres of mass. For example, if a shell bursts in mid-air, the explosive forces are internal; the only external force, gravity, is unchanged, so the centre of mass of the fragments continues along the original parabola (until a fragment hits the ground).

Linear momentum of a system

The total momentum of a system is the vector sum P = p₁ + p₂ + ... + pₙ = m₁v₁ + ... + mₙvₙ. Comparing with the equation above: P = MV. Differentiating, dP/dt = MA = F_ext, Newton's second law for a system. If F_ext = 0, then P is constant and the centre of mass moves with constant velocity, however complicated the motions of the individual particles. In component form Pₓ, P_y and P_z are each constant.

When an unstable radium nucleus at rest decays into a radon nucleus and an alpha particle, the forces are internal, so the two products fly apart back to back and their centre of mass stays at rest. Two stars of a binary system, with no outside force, move in circles about their common centre of mass while that centre of mass drifts uniformly. Splitting motion into motion of the centre of mass plus motion about the centre of mass is a powerful technique.

Worked example 1: a shell breaks in flight

A 3.0 kg shell moving horizontally at 20 m s⁻¹ breaks into two pieces. The 2.0 kg piece continues forward at 35 m s⁻¹. Find the velocity of the 1.0 kg piece. Only internal forces act in the break, so horizontal momentum is conserved: 3.0 × 20 = 2.0 × 35 + 1.0 × v, so 60 = 70 + v and v = −10 m s⁻¹, i.e. 10 m s⁻¹ backward. Check: the centre of mass velocity afterwards is (2.0 × 35 + 1.0 × (−10))/3.0 = 60/3.0 = 20 m s⁻¹, unchanged.

The vector product

The vector (cross) product of a and b is a vector c = a × b such that: (i) its magnitude is c = ab sin θ, θ being the smaller angle (less than 180°) between them; (ii) it is perpendicular to the plane containing a and b; (iii) its direction follows the right-hand rule: curl the fingers of the right hand from a towards b through the smaller angle, and the thumb points along c (equivalently, a right-handed screw turned from a to b advances along c). Geometrically, |a × b| is the area of the parallelogram formed by a and b.

Scalar product versus vector product

  • Scalar (dot) product a·b
    • Result is a scalar: ab cos θ
    • Commutative: a·b = b·a
    • Zero when a ⟂ b
    • Used for work, power
  • Vector (cross) product a × b
    • Result is a vector: magnitude ab sin θ
    • Anti-commutative: a × b = −b × a
    • Zero when a ∥ b (including a × a = 0)
    • Used for torque, angular momentum, v = ω × r

Properties: a × b = −(b × a) (not commutative); a × (b + c) = a × b + a × c (distributive); a × a = 0. Under a mirror reflection, a → −a and b → −b, so a × b does not change sign. For unit vectors: î × î = ĵ × ĵ = k̂ × k̂ = 0, and î × ĵ = k̂, ĵ × k̂ = î, k̂ × î = ĵ (cyclic order gives +), while ĵ × î = −k̂, k̂ × ĵ = −î, î × k̂ = −ĵ (non-cyclic gives −). Expanding with these:

a × b = (a_yb_z − a_zb_y) î + (a_zbₓ − aₓb_z) ĵ + (aₓb_y − a_ybₓ) k̂, the determinant with rows (î ĵ k̂), (aₓ a_y a_z), (bₓ b_y b_z).

Worked example 2: a cross product in components

Find a × b for a = 2î + 3ĵ and b = î − ĵ + 2k̂. Here a_z = 0. î component: a_yb_z − a_zb_y = 3 × 2 − 0 × (−1) = 6. ĵ component: a_zbₓ − aₓb_z = 0 × 1 − 2 × 2 = −4. k̂ component: aₓb_y − a_ybₓ = 2 × (−1) − 3 × 1 = −5. So a × b = 6î − 4ĵ − 5k̂. Check: it should be perpendicular to both: (6)(2) + (−4)(3) + (−5)(0) = 0 ✓ and (6)(1) + (−4)(−1) + (−5)(2) = 0 ✓. Its magnitude √(36 + 16 + 25) = √77 ≈ 8.8 is the area of the parallelogram on a and b. For comparison, a·b = 2 − 3 + 0 = −1.

Key takeaways

  • MA = F_ext: internal forces never affect the motion of the centre of mass.
  • P = MV and dP/dt = F_ext; with no external force P and V are constant.
  • a × b has magnitude ab sin θ, is perpendicular to both, and follows the right-hand rule.
  • a × b = −b × a; î × ĵ = k̂ in cyclic order.

Check your understanding

  1. 1. A projectile explodes into several fragments at the top of its path. Ignoring air resistance, the centre of mass of the fragments:

    1. stops at the point of explosion
    2. falls vertically from that point
    3. moves along a straight line
    4. continues along the original parabolic path
    Show answer

    Answer: D. The explosive forces are internal and do not affect the centre of mass. The only external force, gravity, is unchanged, so the centre of mass follows the same parabola it would have followed without the explosion.

  2. 2. î × k̂ equals:

    1. ĵ
    2. −ĵ
    3. k̂
    4. zero
    Show answer

    Answer: B. In cyclic order k̂ × î = ĵ, so reversing the order gives î × k̂ = −(k̂ × î) = −ĵ.

  3. 3. The magnitude of a × b, where a = 3 units and b = 4 units with 30° between them, is:

    1. 6 units
    2. 12 units
    3. 10.4 units
    4. 3.5 units
    Show answer

    Answer: A. |a × b| = ab sin θ = 3 × 4 × sin 30° = 12 × 0.5 = 6 units.

  4. 4. A 4.0 kg body at rest explodes into two pieces of 1.0 kg and 3.0 kg. The 1.0 kg piece moves off at 12 m s⁻¹. The speed of the other piece is:

    1. 12 m s⁻¹
    2. 3.0 m s⁻¹
    3. 4.0 m s⁻¹
    4. 36 m s⁻¹
    Show answer

    Answer: C. Initial momentum is zero, so 1.0 × 12 = 3.0 × v, giving v = 4.0 m s⁻¹ in the opposite direction. The centre of mass stays at rest.

  5. 5. Assertion (A): The vector product of two parallel vectors is zero. Reason (R): The magnitude of a × b is ab sin θ, and sin 0° = 0.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: A. Both are true. For parallel vectors θ = 0° (or 180°), so ab sin θ = 0. R gives exactly the reason.

Privacy · Terms · Refunds · Delivery