• Foundation
  • About 24 min
  • 5 practice questions

Moment of inertia and the dynamics of rotation about a fixed axis

Define moment of inertia and radius of gyration, use the equations of rotational kinematics, apply τ = Iα, W = τθ and P = τω, and use L = Iω and its conservation.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Derive K = ½Iω² and define moment of inertia I = Σmᵢrᵢ² and radius of gyration.
  • Use standard moments of inertia of rings, rods, discs, cylinders and spheres.
  • Apply the equations of rotational kinematics for constant angular acceleration.
  • Use τ = Iα, work τθ and power τω, comparing them with translation.
  • Use L = Iω and the conservation of angular momentum for a fixed axis.

What plays the role of mass in rotation? Mass measures how hard it is to change a body's velocity. The rotational counterpart must measure how hard it is to change angular velocity, and it turns out to depend not just on how much mass there is but on where it is placed relative to the axis.

Moment of inertia

In a body rotating about a fixed axis with angular velocity ω, a particle of mass mᵢ at distance rᵢ from the axis has speed rᵢω and kinetic energy ½mᵢrᵢ²ω². Adding over all particles (ω is the same for all): K = ½(Σmᵢrᵢ²)ω². We define the moment of inertia about that axis as I = Σmᵢrᵢ², so that K = ½Iω², just like ½mv². I has dimensions [M L²] and unit kg m². Unlike mass, it is not fixed for a body: it depends on the mass, its distribution about the axis, and the position and orientation of the axis. For a thin ring of mass M and radius R about its central perpendicular axis, every bit of mass is at distance R, so I = MR². For two masses M/2 at the ends of a light rod of length l, about the perpendicular axis through the middle, I = 2 × (M/2)(l/2)² = Ml²/4.

Moments of inertia of some uniform bodies (M = mass)
BodyAxisMoment of inertia
Thin ring, radius RPerpendicular to plane, through centreMR²
Thin ring, radius RA diameterMR²/2
Thin rod, length LPerpendicular to rod, through midpointML²/12
Disc, radius RPerpendicular to disc, through centreMR²/2
Disc, radius RA diameterMR²/4
Hollow cylinder, radius RAxis of cylinderMR²
Solid cylinder, radius RAxis of cylinderMR²/2
Solid sphere, radius RA diameter2MR²/5

We can always write I = Mk², where k, the radius of gyration, is the distance from the axis at which the whole mass could be concentrated to give the same moment of inertia. For a rod about its middle, k = L/√12; for a disc about a diameter, k = R/2. Because a large I resists changes in rotation, engines use a heavy flywheel to smooth out jerky changes in speed.

Kinematics of rotation about a fixed axis

Rotation about a fixed axis needs just one variable, the angle θ, so it parallels straight-line motion exactly. With ω = dθ/dt and α = dω/dt constant: ω = ω₀ + αt, θ = θ₀ + ω₀t + ½αt², ω² = ω₀² + 2α(θ − θ₀). The first follows by integrating dω/dt = α with ω = ω₀ at t = 0; the others follow as in linear kinematics.

Dynamics: torque, work and power

For a fixed axis only torque components along the axis matter. A force F acting on a particle at distance r from the axis does work dW = F ds cos φ = F(r dθ) sin α = τ dθ, so the work done by a torque is dW = τ dθ and the power is P = τω (compare dW = F ds and P = Fv). In a rigid body this work all goes into kinetic energy: τω = d(½Iω²)/dt = Iω dω/dt = Iωα, giving

τ = Iα: Newton's second law for rotation about a fixed axis. Also K = ½Iω², W = τθ, P = τω, L = Iω.

Angular momentum about a fixed axis and its conservation

For a body rotating about a fixed axis, the component of angular momentum along the axis is L_z = Iω (for bodies symmetric about the axis, the whole of L is along the axis). From dL/dt = τ_ext, d(Iω)/dt = τ, which gives τ = Iα when I is constant. If the external torque about the axis is zero, Iω = constant. Sit on a freely turning stool spinning with arms folded, then stretch your arms out: I increases, so ω decreases. Pull them in and you spin faster. Divers, acrobats, skaters and dancers performing a pirouette use this: they change their shape to change I, and ω adjusts so that Iω stays the same.

A spinning skater and constant angular momentum

  1. Arms stretched out Large I, small ω.
  2. Arms pulled in I decreases, so ω increases (Iω unchanged).
  3. Fast spin Small I, large ω.
  4. Arms out again I increases and the spin slows.

Then back to step 1: Arms stretched out

The translation-rotation analogy
TranslationRotation about a fixed axis
Displacement xAngular displacement θ
Velocity v = dx/dtAngular velocity ω = dθ/dt
Acceleration a = dv/dtAngular acceleration α = dω/dt
Mass mMoment of inertia I
Force F = maTorque τ = Iα
Work dW = F dsWork dW = τ dθ
Kinetic energy ½mv²Kinetic energy ½Iω²
Power P = FvPower P = τω
Momentum p = mvAngular momentum L = Iω

Worked example 1: a speeding-up wheel

A wheel's speed rises uniformly from 600 rpm to 1800 rpm in 10 s. Find α and the number of revolutions made. Step 1: ω₀ = 2π × 600/60 = 20π rad s⁻¹; ω = 2π × 1800/60 = 60π rad s⁻¹. Step 2: α = (60π − 20π)/10 = 4π ≈ 12.6 rad s⁻². Step 3: θ = ω₀t + ½αt² = 20π × 10 + ½ × 4π × 100 = 200π + 200π = 400π rad. Step 4: revolutions = 400π/2π = 200.

Worked example 2: a string unwinding from a disc

A light string is wound round a solid disc of mass 10 kg and radius 0.30 m, free to turn on a frictionless horizontal axle. A steady pull of 15 N is applied. (a) I = ½MR² = ½ × 10 × 0.09 = 0.45 kg m²; τ = FR = 15 × 0.30 = 4.5 N m; α = τ/I = 4.5/0.45 = 10 rad s⁻². (b) When 1.5 m of string has unwound, θ = 1.5/0.30 = 5.0 rad, and from rest ω² = 2αθ = 2 × 10 × 5.0 = 100, so ω = 10 rad s⁻¹. (c) Kinetic energy = ½ × 0.45 × 100 = 22.5 J; work done by the pull = 15 × 1.5 = 22.5 J. They agree, as there is no friction.

Worked example 3: a turntable and a pirouette

A skater spinning at 2.0 rev s⁻¹ with I = 4.0 kg m² pulls in her arms, reducing I to 1.6 kg m². No external torque acts about the vertical axis, so I₁ω₁ = I₂ω₂: ω₂ = 4.0 × 2.0/1.6 = 5.0 rev s⁻¹. Her kinetic energy ½Iω² rises by the factor (1.6 × 5.0²)/(4.0 × 2.0²) = 40/16 = 2.5; the extra energy comes from the work her muscles do pulling her arms in. Angular momentum is conserved, kinetic energy is not.

Key takeaways

  • I = Σmr² depends on the mass and on how far it lies from the axis; K = ½Iω².
  • Rotational kinematics copies linear kinematics with θ, ω, α.
  • τ = Iα, W = τθ, P = τω.
  • With no external torque about the axis, Iω stays constant.

Check your understanding

  1. 1. Two particles of 0.50 kg each are fixed at the ends of a light rod 1.0 m long. The moment of inertia about a perpendicular axis through the rod's midpoint is:

    1. 0.25 kg m²
    2. 0.50 kg m²
    3. 1.0 kg m²
    4. 0.125 kg m²
    Show answer

    Answer: A. Each particle is 0.50 m from the axis: I = 2 × 0.50 × (0.50)² = 2 × 0.50 × 0.25 = 0.25 kg m².

  2. 2. A torque of 12 N m acts on a wheel of moment of inertia 3.0 kg m² about its fixed axle. Its angular acceleration is:

    1. 36 rad s⁻²
    2. 0.25 rad s⁻²
    3. 9.0 rad s⁻²
    4. 4.0 rad s⁻²
    Show answer

    Answer: D. τ = Iα, so α = τ/I = 12/3.0 = 4.0 rad s⁻².

  3. 3. A flywheel with I = 2.0 kg m² rotates at 10 rad s⁻¹. Its rotational kinetic energy is:

    1. 20 J
    2. 200 J
    3. 100 J
    4. 10 J
    Show answer

    Answer: C. K = ½Iω² = ½ × 2.0 × 10² = 100 J.

  4. 4. A wheel starts from rest with a constant angular acceleration of 2.0 rad s⁻². The angle it turns through in 5.0 s is:

    1. 10 rad
    2. 25 rad
    3. 50 rad
    4. 5.0 rad
    Show answer

    Answer: B. θ = ω₀t + ½αt² = 0 + ½ × 2.0 × 5.0² = 25 rad (about 4 revolutions).

  5. 5. Assertion (A): A diver pulls her arms and legs in to spin faster in mid-air. Reason (R): With no external torque about her centre of mass, Iω stays constant, so reducing I increases ω.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: A. Both are true. Gravity acts at the centre of mass and gives no torque about it, so her angular momentum Iω is conserved. Tucking in reduces I, so ω must increase. R explains A.

Privacy · Terms · Refunds · Delivery