• Foundation
  • About 20 min
  • 5 practice questions

Rigid bodies, kinds of motion and the centre of mass

Distinguish translation, rotation and their combination for a rigid body, and locate the centre of mass of particle systems and of symmetric and composite bodies.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define a rigid body and describe pure translation, rotation about a fixed axis and their combination.
  • Define the centre of mass of two particles, of n particles and in vector form.
  • Find the centre of mass of particles arranged in a line or a plane.
  • Use symmetry to locate the centre of mass of uniform rods, rings, discs and spheres.
  • Find the centre of mass of a composite or cut-out body.

So far we have treated bodies as points. Real bodies have size: a wheel turns, a diver somersaults, a hammer thrown through the air spins as it flies. An extended body is a system of particles, and to describe it we need two new ideas: the centre of mass and rotation.

Rigid bodies and their motion

A rigid body is an ideal body whose shape never changes: the distance between every pair of its particles stays fixed. No real body is perfectly rigid, but wheels, tops, steel beams and even planets can often be treated as rigid when their bending or vibration is negligible.

A block sliding down a slope without turning is in pure translation: at any instant every particle has the same velocity. A body fixed along a line can only rotate about that line, the axis of rotation, as a ceiling fan or a potter's wheel does. In rotation about a fixed axis, every particle moves in a circle in a plane perpendicular to the axis, with its centre on the axis; particles on the axis stay at rest. A cylinder rolling down a slope does both: it translates and rotates, and its particles have different velocities (the point touching the ground is momentarily at rest if it rolls without slipping). In some rotations only a point is fixed, not a line: the axis of a spinning top sweeps out a cone (precession), and the axis of a pedestal fan swings from side to side. In this chapter we study rotation about a fixed axis.

How a rigid body can move

  • Pure translation
    • All particles have the same velocity
    • Example: a block sliding without turning
  • Rotation about a fixed axis
    • Each particle moves in a circle centred on the axis
    • Example: ceiling fan, potter's wheel
  • Rotation about a fixed point
    • Axis passes through the fixed point but moves
    • Example: spinning top, oscillating pedestal fan
  • Translation + rotation
    • Body not fixed anywhere
    • Example: a cylinder rolling down a slope

Centre of mass of a system of particles

For two particles of masses m₁ and m₂ at x₁ and x₂ on the x-axis, the centre of mass is at X = (m₁x₁ + m₂x₂)/(m₁ + m₂), a mass-weighted average of the positions. For equal masses it lies midway between them; otherwise it is nearer the heavier particle. For n particles, X = Σmᵢxᵢ/M, Y = Σmᵢyᵢ/M and Z = Σmᵢzᵢ/M, where M = Σmᵢ is the total mass. In vector form, R = Σmᵢrᵢ/M. If the origin is placed at the centre of mass, Σmᵢrᵢ = 0. For three equal masses at the corners of a triangle, the centre of mass is the centroid of the triangle.

R = Σmᵢrᵢ / M; for a continuous body R = (1/M) ∫ r dm.

Centre of mass of extended bodies

A rod or a disc contains an enormous number of atoms, so we treat it as a continuous distribution of mass: the sums become integrals, X = (1/M)∫x dm, and so on. For uniform bodies with a centre of symmetry (thin rod, ring, disc, sphere, rectangular plate), every element dm at (x, y, z) is matched by an equal element at (−x, −y, −z), so the integrals vanish about the geometric centre: the centre of mass is at the geometric centre. For a uniform triangular plate, slicing it into thin strips parallel to one side shows that the centre of mass lies on each median, so it is at the centroid, where the medians meet. The centre of mass need not lie inside the material: the centre of mass of a ring is at its empty centre.

Worked example 1: two particles on a line

Masses of 2.0 kg and 3.0 kg are at x = 1.0 m and x = 6.0 m. X = (2.0 × 1.0 + 3.0 × 6.0)/(2.0 + 3.0) = (2.0 + 18)/5.0 = 4.0 m. The centre of mass divides the 5.0 m gap in the ratio 3 : 2, nearer the heavier mass, as expected.

Worked example 2: three particles in a plane

Masses of 1.0 kg, 2.0 kg and 1.0 kg are at (0, 0), (4.0 m, 0) and (0, 4.0 m). M = 4.0 kg. X = (1.0 × 0 + 2.0 × 4.0 + 1.0 × 0)/4.0 = 2.0 m. Y = (1.0 × 0 + 2.0 × 0 + 1.0 × 4.0)/4.0 = 1.0 m. The centre of mass is at (2.0 m, 1.0 m). It is not at the centroid (4/3 m, 4/3 m) of the triangle, because the masses are unequal.

Worked example 3: a disc with a hole

From a uniform disc of radius R, a circular hole of radius R/2 is cut so that the hole touches the rim. Where is the centre of mass of the remaining piece? Treat the full disc (mass proportional to its area πR², centre at x = 0) as the remaining piece plus the cut-out piece (area πR²/4, centre at x = R/2). Mass is proportional to area, so take the full disc as 4 units and the hole as 1 unit; the remainder has 3 units. Then 4 × 0 = 3X + 1 × (R/2), giving X = −R/6. The centre of mass shifts R/6 from the centre, away from the hole. Treating a hole as a 'negative mass' is a handy trick.

Key takeaways

  • A free rigid body can translate, rotate, or do both; a body fixed on a line can only rotate.
  • R = Σmᵢrᵢ/M: the centre of mass is a mass-weighted average position.
  • Uniform symmetric bodies have their centre of mass at the geometric centre.
  • For composite bodies, combine the centres of mass of the parts; subtract for holes.

Check your understanding

  1. 1. Particles of 1 kg and 4 kg are placed at x = 0 and x = 5 m. Their centre of mass is at:

    1. x = 4 m
    2. x = 2.5 m
    3. x = 1 m
    4. x = 3 m
    Show answer

    Answer: A. X = (1 × 0 + 4 × 5)/(1 + 4) = 20/5 = 4 m, closer to the heavier particle.

  2. 2. Which statement about rotation of a rigid body about a fixed axis is correct?

    1. All particles have the same linear velocity
    2. Particles on the axis move fastest
    3. Each particle moves in a circle in a plane perpendicular to the axis, centred on the axis
    4. Particles move in straight lines parallel to the axis
    Show answer

    Answer: C. In rotation about a fixed axis every particle describes a circle in a plane perpendicular to the axis with its centre on the axis; particles on the axis stay at rest. All particles share the same angular velocity, not the same linear velocity.

  3. 3. Where is the centre of mass of a uniform circular ring?

    1. On the ring, at the point nearest the ground
    2. At the centre of the ring, where there is no material
    3. Anywhere on the ring
    4. It cannot be defined for a ring
    Show answer

    Answer: B. By symmetry, each element of the ring has an equal partner diametrically opposite, so the centre of mass is at the geometric centre, which is empty space. The centre of mass need not lie inside the material.

  4. 4. Three equal masses are placed at (0, 0), (6 cm, 0) and (0, 6 cm). The coordinates of their centre of mass are:

    1. (3 cm, 3 cm)
    2. (6 cm, 6 cm)
    3. (2 cm, 3 cm)
    4. (2 cm, 2 cm)
    Show answer

    Answer: D. For equal masses the centre of mass is the average position: X = (0 + 6 + 0)/3 = 2 cm and Y = (0 + 0 + 6)/3 = 2 cm. This is the centroid of the triangle.

  5. 5. Assertion (A): The centre of mass of a uniform thin rod lies at its midpoint. Reason (R): For every mass element at distance x on one side of the midpoint there is an equal element at distance x on the other side.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: A. Both are true. Because of this reflection symmetry, the contributions to ∫x dm about the midpoint cancel in pairs, so the integral is zero there and the midpoint is the centre of mass. R explains A.

Privacy · Terms · Refunds · Delivery