Revision notes

Chapter 10 Thermal Properties of Matter: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Temperature, heat and temperature scales

(tF − 32)/180 = tC/100, or tF = (9/5) tC + 32. Kelvin: T = tC + 273.15 (same size of degree as Celsius).

PV = μRT, where μ is the number of moles and R = 8.31 J mol⁻¹ K⁻¹ is the universal gas constant.

How absolute zero is found

  1. Fixed volume of low-density gas Pressure is measured at several temperatures.
  2. Plot P against t (°C) A straight line for every gas.
  3. Extrapolate to P = 0 All lines meet at −273.15 °C.
  4. Define 0 K there Kelvin scale: T = tC + 273.15.
Fixed points on the three scales
PointCelsiusFahrenheitKelvin
Absolute zero−273.15 °C−459.67 °F0 K
Ice point0 °C32 °F273.15 K
Steam point100 °C212 °F373.15 K
  • Heat is energy in transit because of a temperature difference; temperature measures hotness.
  • tF = (9/5)tC + 32 and T = tC + 273.15.
  • PV = μRT with R = 8.31 J mol⁻¹ K⁻¹; always use kelvin in gas equations.
  • A constant-volume gas thermometer, extrapolated to zero pressure, gives absolute zero at −273.15 °C.
Read the full lesson

Lesson 2

Thermal expansion of solids, liquids and gases

Δl = αl l ΔT, ΔA = 2αl A ΔT, ΔV = 3αl V ΔT, so αl : αA : αv = 1 : 2 : 3.

Why a lake freezes from the top

  1. Surface water cools Above 4 °C it becomes denser and sinks.
  2. Whole lake reaches about 4 °C Water at 4 °C is densest and stays at the bottom.
  3. Surface cools below 4 °C It is now less dense, so it stays on top.
  4. Ice forms on the surface Water below remains near 4 °C; life survives.
  • Δl/l = αl ΔT; αA = 2αl and αv = 3αl for an isotropic solid.
  • Water is densest at 4 °C, so lakes freeze from the top down.
  • For an ideal gas at constant pressure αv = 1/T.
  • A rod prevented from expanding feels thermal stress Y αl ΔT.
Read the full lesson

Lesson 3

Specific heat, calorimetry and latent heat

Q = m s ΔT (no change of state). Calorimetry: heat lost by the hot body = heat gained by the cold body, if no heat escapes.

Heating ice at −10 °C to water at 20 °C

  1. Warm the ice Q₁ = m s(ice) ΔT, from −10 °C to 0 °C.
  2. Melt at 0 °C Q₂ = m Lf; temperature stays at 0 °C.
  3. Warm the water Q₃ = m s(water) ΔT, from 0 °C to 20 °C.
  4. Add them Total Q = Q₁ + Q₂ + Q₃.
  • s = ΔQ/(mΔT) in J kg⁻¹ K⁻¹; water's is large (about 4186).
  • Calorimetry: heat lost = heat gained in an isolated system.
  • During a change of state the temperature stays constant; Q = mL.
  • Higher pressure lowers the melting point of ice (regelation) and raises the boiling point of water (pressure cooker).
Read the full lesson

Lesson 4

Heat transfer by conduction and convection

H = K A (TC − TD)/L. K is the thermal conductivity; SI unit J s⁻¹ m⁻¹ K⁻¹ = W m⁻¹ K⁻¹.

Approximate thermal conductivities (standard textbook values)
MaterialK (W m⁻¹ K⁻¹)
Silver406
Copper385
Aluminium205
Steel50.2
Glass0.8
Wood0.12
Air0.024

A sea breeze (daytime convection cycle)

  1. Land heats faster than the sea Water has a larger specific heat and mixes heat through its depth.
  2. Air over the land warms and rises Warm air is less dense.
  3. Cooler air flows in from the sea This surface wind is the sea breeze.
  4. Air cools aloft and sinks over the sea It returns towards the land, completing the loop.

Then back to step 1: Land heats faster than the sea

  • Conduction: H = KA(TC − TD)/L in the steady state; metals have large K, gases tiny K.
  • In series the same H flows; T₀ = (K₁T₁ + K₂T₂)/(K₁ + K₂) for equal L and A.
  • Convection moves the fluid itself: natural (buoyancy) or forced (pump, fan, heart).
  • Sea breeze by day, land breeze by night; trade winds are convection modified by Earth's rotation.
Read the full lesson

Lesson 5

Radiation, blackbody laws and Newton's law of cooling

How a thermos flask blocks heat transfer

  • Conduction
    • Vacuum between the walls
    • Cork or plastic supports
  • Convection
    • Vacuum: no air to circulate
    • Stopper keeps air from moving in or out
  • Radiation
    • Silvered inner wall reflects heat back to the contents
    • Silvered outer wall reflects incoming heat

Wien's displacement law: λm T = b, where b ≈ 2.9 × 10⁻³ m K.

H = eσAT⁴ (emitted); net loss H = eσA(T⁴ − Ts⁴); σ = 5.67 × 10⁻⁸ W m⁻² K⁻⁴.

  • Radiation needs no medium and travels at 3 × 10⁸ m s⁻¹; dark surfaces absorb and emit best.
  • Wien: λm T = 2.9 × 10⁻³ m K, so hotter bodies peak at shorter wavelengths.
  • Stefan-Boltzmann: H = eσAT⁴, net loss eσA(T⁴ − Ts⁴), with T in kelvin.
  • Newton's law of cooling: rate of cooling ∝ excess temperature (small differences).
Read the full lesson

Privacy · Terms · Refunds · Delivery