- Foundation
- About 18 min
- 5 practice questions
Temperature, heat and temperature scales
Distinguish heat from temperature, convert between Celsius, Fahrenheit and Kelvin, use the ideal-gas equation PV = μRT, and explain how a gas thermometer leads to absolute zero.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define temperature and heat and give their SI units.
- Explain how a thermometer scale is built from two fixed points.
- Convert temperatures between the Celsius, Fahrenheit and Kelvin scales.
- Use the ideal-gas equation and explain how absolute zero is found.
A cup of hot tea left on a table cools down, and a glass of ice-cold water on the same table warms up. In both cases energy moves until the drink and the room reach the same temperature. This chapter studies that energy flow: how it is measured, what it does to matter (expansion, warming, melting, boiling) and the three ways it travels.
Temperature and heat
Temperature is a measure of how hot or cold a body is. Our sense of touch can compare temperatures roughly, but it is unreliable and works over only a small range, so science uses thermometers. Heat is the energy that is transferred between a system and its surroundings (or between two systems) because of a temperature difference. Heat always flows on its own from the hotter body to the colder one. The SI unit of heat is the joule (J); the SI unit of temperature is the kelvin (K), and the degree Celsius (°C) is also in common use.
Thermometers and temperature scales
A thermometer uses a property that changes steadily with temperature, such as the volume of mercury or alcohol in a glass tube. To build a scale we need two fixed points that always occur at the same temperature. The usual ones are the ice point and the steam point: the temperatures at which pure water freezes and boils at standard pressure. On the Celsius scale they are 0 °C and 100 °C (100 divisions); on the Fahrenheit scale 32 °F and 212 °F (180 divisions). A graph of Fahrenheit against Celsius temperature is a straight line, which gives
(tF − 32)/180 = tC/100, or tF = (9/5) tC + 32. Kelvin: T = tC + 273.15 (same size of degree as Celsius).
The ideal-gas equation and absolute zero
Liquid-in-glass thermometers made with different liquids agree at the fixed points but disagree slightly in between, because different liquids expand differently. Gases at low density, however, all behave in the same way. For a fixed amount of gas, Boyle's law says PV = constant at constant temperature and Charles' law says V/T = constant at constant pressure. Together they give PV/T = constant, which for any low-density gas is written as the ideal-gas equation:
PV = μRT, where μ is the number of moles and R = 8.31 J mol⁻¹ K⁻¹ is the universal gas constant.
In a constant-volume gas thermometer the volume is kept fixed, so P ∝ T and temperature is read from the pressure. Plotting P against temperature in °C for several low-density gases gives straight lines. Extended (extrapolated) to zero pressure, all of them meet the temperature axis at the same point, −273.15 °C. This is absolute zero, the zero of the Kelvin (absolute) scale: 0 K = −273.15 °C. Real gases liquefy before reaching it, but the extrapolation shows the lowest temperature an ideal gas could have.
How absolute zero is found
- Fixed volume of low-density gas Pressure is measured at several temperatures.
- Plot P against t (°C) A straight line for every gas.
- Extrapolate to P = 0 All lines meet at −273.15 °C.
- Define 0 K there Kelvin scale: T = tC + 273.15.
| Point | Celsius | Fahrenheit | Kelvin |
|---|---|---|---|
| Absolute zero | −273.15 °C | −459.67 °F | 0 K |
| Ice point | 0 °C | 32 °F | 273.15 K |
| Steam point | 100 °C | 212 °F | 373.15 K |
Worked example 1: body temperature
A thermometer reads 98.6 °F. Express this in °C and K. tC = (5/9)(tF − 32) = (5/9)(98.6 − 32) = (5/9)(66.6) = 37.0 °C. T = 37.0 + 273.15 = 310.15 K.
Worked example 2: where the scales agree
At what temperature do the Celsius and Fahrenheit scales give the same number? Put tF = tC = x in tF = (9/5)tC + 32: x = 1.8x + 32, so −0.8x = 32 and x = −40. So −40 °C = −40 °F.
Worked example 3: using PV = μRT
Find the pressure of 2.0 mol of an ideal gas in a 0.050 m³ container at 27 °C. Temperature must be in kelvin: T = 27 + 273 = 300 K. P = μRT/V = (2.0 × 8.31 × 300)/0.050 = 4986/0.050 = 9.97 × 10⁴ Pa, about 1.0 × 10⁵ Pa (close to one atmosphere).
Key takeaways
- Heat is energy in transit because of a temperature difference; temperature measures hotness.
- tF = (9/5)tC + 32 and T = tC + 273.15.
- PV = μRT with R = 8.31 J mol⁻¹ K⁻¹; always use kelvin in gas equations.
- A constant-volume gas thermometer, extrapolated to zero pressure, gives absolute zero at −273.15 °C.
Check your understanding
-
1. What is 25 °C on the Kelvin scale?
- 248.15 K
- 298.15 K
- 25 K
- 77 K
Show answer
Answer: B. T = tC + 273.15 = 25 + 273.15 = 298.15 K. Subtracting instead gives 248.15 K, and 77 is the Fahrenheit value.
-
2. At which temperature do the Celsius and Fahrenheit scales show the same number?
- 0
- −273.15
- −40
- 100
Show answer
Answer: C. Setting tF = tC = x in tF = 1.8tC + 32 gives x = 1.8x + 32, so x = −40. Thus −40 °C equals −40 °F.
-
3. A day's temperature is 50 °F. What is it in degrees Celsius?
- 10 °C
- 18 °C
- 28 °C
- 45.6 °C
Show answer
Answer: A. tC = (5/9)(tF − 32) = (5/9)(50 − 32) = (5/9)(18) = 10 °C.
-
4. Why is a gas thermometer preferred as a standard over liquid-in-glass thermometers?
- Gases are cheaper than mercury
- Gas thermometers do not need fixed points
- Gases do not expand on heating
- All low-density gases expand in the same way, so the reading does not depend on which gas is used
Show answer
Answer: D. Different liquids expand differently, so liquid thermometers agree only at the fixed points. Low-density gases all obey PV = μRT, so a gas thermometer gives the same reading whatever gas fills it.
-
5. One mole of an ideal gas occupies 0.0224 m³ at 273 K. What is its pressure? (R = 8.31 J mol⁻¹ K⁻¹)
- 1.0 × 10³ Pa
- 2.2 × 10⁴ Pa
- 1.0 × 10⁵ Pa
- 8.3 × 10⁶ Pa
Show answer
Answer: C. P = μRT/V = (1 × 8.31 × 273)/0.0224 = 2268.6/0.0224 ≈ 1.01 × 10⁵ Pa, about one atmosphere.
Sign in to keep track of the lessons you finish.