- Foundation
- About 22 min
- 5 practice questions
Specific heat, calorimetry and latent heat
Use Q = msΔT and molar heat capacity, apply heat lost = heat gained in calorimetry, explain change of state, regelation and boiling point, and solve problems with latent heat Q = mL.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define heat capacity, specific heat capacity and molar specific heat capacity.
- Use the principle of calorimetry to find a specific heat or a final temperature.
- Explain melting, boiling, sublimation, regelation and the effect of pressure on boiling point.
- Use Q = mL with latent heats of fusion and vaporisation, including ice-to-steam problems.
Heat a pan of water and a pan of oil of equal mass on the same burner: the oil gets hot much faster. Heat a mixture of ice and water and the thermometer refuses to move until all the ice has melted. This lesson explains both observations.
Specific heat capacity
Experiments show that the heat needed to warm a substance is proportional to its mass m and to the temperature rise ΔT, and depends on the substance. The heat capacity of a body is S = ΔQ/ΔT. The specific heat capacity is the heat needed per unit mass per unit temperature change: s = ΔQ/(m ΔT), in J kg⁻¹ K⁻¹. Per mole instead of per kilogram it is the molar specific heat capacity C = ΔQ/(μ ΔT), in J mol⁻¹ K⁻¹. For gases C depends on the conditions: Cp at constant pressure and Cv at constant volume (Chapter 11). Water has an unusually large specific heat, about 4186 J kg⁻¹ K⁻¹, which is why it is used in car radiators and hot-water bags, and why land heats and cools faster than the sea.
Q = m s ΔT (no change of state). Calorimetry: heat lost by the hot body = heat gained by the cold body, if no heat escapes.
Worked example 1: heating water
How much heat raises 2.0 kg of water from 25 °C to 75 °C? (s = 4186 J kg⁻¹ K⁻¹) Q = msΔT = 2.0 × 4186 × 50 = 4.19 × 10⁵ J.
Calorimetry
Calorimetry means measurement of heat. A calorimeter is a metal (copper or aluminium) vessel with a stirrer of the same metal, kept inside an insulated jacket so that very little heat is exchanged with the surroundings. In an isolated system the heat given out by the hotter parts equals the heat taken in by the colder parts.
Worked example 2: specific heat of a metal
A 0.20 kg metal block at 100 °C is dropped into 0.40 kg of water at 20 °C. The final steady temperature is 24 °C. Ignoring the calorimeter, find the metal's specific heat. Heat lost by metal = 0.20 × s × (100 − 24) = 15.2 s. Heat gained by water = 0.40 × 4186 × (24 − 20) = 6697.6 J. Equating: s = 6697.6/15.2 ≈ 441 J kg⁻¹ K⁻¹, close to the textbook value for iron.
Change of state
Heat ice slowly while stirring and record its temperature. The temperature rises to 0 °C and then stays at 0 °C until all the ice has melted, although heat is still being supplied. The heat is being used to change the state. During melting (fusion) solid and liquid coexist in thermal equilibrium at the melting point; the reverse is freezing. Then the water warms to about 100 °C and stays there while it turns into vapour: during vaporisation liquid and vapour coexist at the boiling point. Some substances, such as dry ice (solid CO₂) and iodine, change directly from solid to vapour: sublimation.
Pressure matters. The melting point of ice falls when pressure rises. A wire loaded with heavy weights passes slowly through a block of ice: ice under the wire melts at the higher pressure, the water flows above the wire and freezes again. This refreezing is regelation; the thin layer of water formed under skate blades works similarly as a lubricant. The boiling point rises with pressure: a pressure cooker cooks faster by raising it, while on high mountains, where the air pressure is lower, water boils below 100 °C and cooking is slow. The temperatures at which a substance melts and boils at standard atmospheric pressure are its normal melting and boiling points. The single temperature and pressure at which solid, liquid and vapour all coexist is the triple point; for water it is 273.16 K at about 611 Pa.
Latent heat
The heat per unit mass transferred during a change of state is the latent heat L: Q = mL, in J kg⁻¹. It is the latent heat of fusion Lf for solid ↔ liquid and of vaporisation Lv for liquid ↔ gas. For water, Lf = 3.33 × 10⁵ J kg⁻¹ and Lv = 22.6 × 10⁵ J kg⁻¹. So steam at 100 °C carries 22.6 × 10⁵ J kg⁻¹ more energy than boiling water, which is why steam burns are more serious.
Heating ice at −10 °C to water at 20 °C
- Warm the ice Q₁ = m s(ice) ΔT, from −10 °C to 0 °C.
- Melt at 0 °C Q₂ = m Lf; temperature stays at 0 °C.
- Warm the water Q₃ = m s(water) ΔT, from 0 °C to 20 °C.
- Add them Total Q = Q₁ + Q₂ + Q₃.
Worked example 3: from ice to warm water
Find the heat needed to turn 0.50 kg of ice at −10 °C into water at 20 °C. Use s(ice) = 2100 J kg⁻¹ K⁻¹, s(water) = 4186 J kg⁻¹ K⁻¹, Lf = 3.33 × 10⁵ J kg⁻¹. Q₁ = 0.50 × 2100 × 10 = 10 500 J. Q₂ = 0.50 × 3.33 × 10⁵ = 166 500 J. Q₃ = 0.50 × 4186 × 20 = 41 860 J. Total = 218 860 J ≈ 2.19 × 10⁵ J. Notice that melting needs far more heat than either warming step.
Worked example 4: mixing ice and warm water
0.10 kg of ice at 0 °C is added to 0.50 kg of water at 40 °C. Find the final temperature T (same constants). Check first: cooling the water to 0 °C would release 0.50 × 4186 × 40 = 83 720 J, more than the 0.10 × 3.33 × 10⁵ = 33 300 J needed to melt the ice, so all the ice melts. Balance: heat lost by warm water = heat to melt ice + heat to warm the melted water: 0.50 × 4186 × (40 − T) = 33 300 + 0.10 × 4186 × T. So 83 720 − 2093T = 33 300 + 418.6T, giving 50 420 = 2511.6T and T ≈ 20 °C.
Key takeaways
- s = ΔQ/(mΔT) in J kg⁻¹ K⁻¹; water's is large (about 4186).
- Calorimetry: heat lost = heat gained in an isolated system.
- During a change of state the temperature stays constant; Q = mL.
- Higher pressure lowers the melting point of ice (regelation) and raises the boiling point of water (pressure cooker).
Check your understanding
-
1. How much heat is needed to raise the temperature of 0.50 kg of aluminium by 20 K? (s = 900 J kg⁻¹ K⁻¹)
- 450 J
- 9000 J
- 18 000 J
- 36 000 J
Show answer
Answer: B. Q = m s ΔT = 0.50 × 900 × 20 = 9000 J.
-
2. Why does a scald from steam at 100 °C usually do more harm than one from water at 100 °C?
- Steam is at a higher temperature than boiling water
- Steam conducts heat better than water
- Water has a lower specific heat than steam
- Each kilogram of steam gives out its latent heat of vaporisation (about 22.6 × 10⁵ J) as it condenses on the skin
Show answer
Answer: D. Both are at 100 °C, but steam first condenses on the skin, releasing its large latent heat of vaporisation, and only then cools like hot water. So it delivers much more heat.
-
3. How much heat is needed to melt 2.0 kg of ice already at 0 °C? (Lf = 3.33 × 10⁵ J kg⁻¹)
- 1.67 × 10⁵ J
- 3.33 × 10⁵ J
- 6.66 × 10⁵ J
- 4.52 × 10⁶ J
Show answer
Answer: C. Q = mLf = 2.0 × 3.33 × 10⁵ = 6.66 × 10⁵ J. No temperature change is involved because the ice is already at its melting point.
-
4. 0.10 kg of water at 80 °C is mixed with 0.30 kg of water at 20 °C in an insulated container. What is the final temperature?
- 35 °C
- 50 °C
- 40 °C
- 65 °C
Show answer
Answer: A. Heat lost = heat gained: 0.10 × s × (80 − T) = 0.30 × s × (T − 20). The s cancels: 8 − 0.1T = 0.3T − 6, so 0.4T = 14 and T = 35 °C (the mass-weighted average).
-
5. Why does food take longer to cook in an open pot on a high mountain?
- Water boils at a higher temperature there
- The lower air pressure lowers the boiling point of water, so the food is cooked at a lower temperature
- Fuel burns faster at high altitude
- The specific heat of water increases with altitude
Show answer
Answer: B. Boiling point falls as pressure falls. At high altitude the air pressure is lower, so water boils below 100 °C and the food heats only to that lower temperature. A pressure cooker does the opposite.
Sign in to keep track of the lessons you finish.