• Foundation
  • About 20 min
  • 5 practice questions

Heat transfer by conduction and convection

Use H = KA(TC − TD)/L for steady conduction, find junction temperatures and equivalent conductivity of bars in series, and explain natural and forced convection, sea breezes and trade winds.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name the three modes of heat transfer and say which need a medium.
  • Use H = KA(TC − TD)/L for a bar in the steady state.
  • Find the junction temperature and equivalent conductivity of two bars joined end to end.
  • Explain natural and forced convection with sea breezes, land breezes and trade winds.

Heat moves in three distinct ways. In conduction energy passes from particle to particle through a material without the material moving. In convection the hot material itself moves and carries the energy. In radiation energy travels as electromagnetic waves, even through a vacuum. This lesson covers the first two; the next covers radiation.

Conduction and thermal conductivity

Hold one end of a metal rod in a flame and the other end soon becomes too hot to hold. Consider a bar of length L and cross-section A whose ends are kept at temperatures TC and TD (TC > TD), with its sides insulated. After some time a steady state is reached: the temperature falls uniformly along the bar and every cross-section passes heat at the same rate. Experiment shows that this rate of heat flow (heat current) H is proportional to the temperature difference and the area, and inversely proportional to the length:

H = K A (TC − TD)/L. K is the thermal conductivity; SI unit J s⁻¹ m⁻¹ K⁻¹ = W m⁻¹ K⁻¹.

Approximate thermal conductivities (standard textbook values)
MaterialK (W m⁻¹ K⁻¹)
Silver406
Copper385
Aluminium205
Steel50.2
Glass0.8
Wood0.12
Air0.024

Metals are good conductors; wood, glass wool and gases are poor ones, and liquids lie in between. Copper-bottomed pans spread heat evenly. Plastic foams insulate well mainly because they trap pockets of air. A concrete roof still conducts enough heat to make rooms hot in summer, so a layer of earth or foam insulation is often added on top.

Worked example 1: heat through a copper rod

A copper rod 0.50 m long with cross-section 2.0 cm² has its ends at 100 °C and 0 °C, its sides insulated. K = 385 W m⁻¹ K⁻¹. H = KA(TC − TD)/L = 385 × 2.0 × 10⁻⁴ × 100/0.50 = 15.4 W.

Bars joined end to end

In the steady state the same heat current H flows through each of two bars joined in series, otherwise the junction would heat up or cool down. For bars of equal length and area, K₁(T₁ − T₀) = K₂(T₀ − T₂), giving the junction temperature T₀ = (K₁T₁ + K₂T₂)/(K₁ + K₂). Treating the pair as one bar of length 2L, its equivalent conductivity is K′ = 2K₁K₂/(K₁ + K₂).

Worked example 2: junction temperature (made-up conductivities)

Bar 1 (K₁ = 200 W m⁻¹ K⁻¹) and bar 2 (K₂ = 50 W m⁻¹ K⁻¹), of equal length and area, are joined end to end. The free end of bar 1 is at 100 °C and that of bar 2 at 0 °C. T₀ = (200 × 100 + 50 × 0)/(200 + 50) = 20 000/250 = 80 °C. Most of the temperature drop (80 °C) happens across the poorer conductor. Equivalent conductivity K′ = 2 × 200 × 50/(200 + 50) = 80 W m⁻¹ K⁻¹.

Worked example 3: heat loss through a window

A glass pane 2.0 m² in area and 4.0 mm thick has its faces at 25 °C and 15 °C (K = 0.8 W m⁻¹ K⁻¹). H = 0.8 × 2.0 × 10/0.0040 = 4000 W. In practice the loss is much smaller because still layers of air on each side of the glass, being poor conductors, take up most of the temperature difference.

Convection

Convection is heat transfer by the actual motion of matter, so it is possible only in fluids. In natural convection gravity does the work: fluid heated from below expands, becomes less dense and rises because of buoyancy, while cooler, denser fluid sinks to take its place, setting up a circulating current. In forced convection a pump or fan moves the fluid: forced-air heating, a car engine's cooling system, and the human circulatory system, in which the heart pumps blood that carries heat round the body and keeps it at a uniform temperature.

A sea breeze (daytime convection cycle)

  1. Land heats faster than the sea Water has a larger specific heat and mixes heat through its depth.
  2. Air over the land warms and rises Warm air is less dense.
  3. Cooler air flows in from the sea This surface wind is the sea breeze.
  4. Air cools aloft and sinks over the sea It returns towards the land, completing the loop.

Then back to step 1: Land heats faster than the sea

At night the land cools faster than the sea, so the cycle reverses and a land breeze blows from land to sea. On a global scale, air at the equator is heated more than air near the poles, so warm air rises at the equator and moves away while cooler air flows in at the surface. The Earth's rotation modifies this circulation: the air descends at about 30° latitude rather than at the poles and returns towards the equator, giving the steady north-easterly surface winds called trade winds.

Key takeaways

  • Conduction: H = KA(TC − TD)/L in the steady state; metals have large K, gases tiny K.
  • In series the same H flows; T₀ = (K₁T₁ + K₂T₂)/(K₁ + K₂) for equal L and A.
  • Convection moves the fluid itself: natural (buoyancy) or forced (pump, fan, heart).
  • Sea breeze by day, land breeze by night; trade winds are convection modified by Earth's rotation.

Check your understanding

  1. 1. What is the SI unit of thermal conductivity?

    1. W m⁻¹ K⁻¹
    2. J kg⁻¹ K⁻¹
    3. W m⁻² K⁻⁴
    4. J K⁻¹
    Show answer

    Answer: A. From H = KAΔT/L, K = HL/(AΔT), with units W × m/(m² × K) = W m⁻¹ K⁻¹. J kg⁻¹ K⁻¹ is the unit of specific heat and W m⁻² K⁻⁴ is the unit of the Stefan-Boltzmann constant.

  2. 2. A steel rod (K = 50 W m⁻¹ K⁻¹) 0.25 m long with cross-section 1.0 cm² has its ends at 100 °C and 0 °C. What is the rate of heat flow in the steady state?

    1. 0.5 W
    2. 200 W
    3. 2.0 W
    4. 20 W
    Show answer

    Answer: C. H = KAΔT/L = 50 × 1.0 × 10⁻⁴ × 100/0.25 = 0.50/0.25 = 2.0 W. Remember 1.0 cm² = 1.0 × 10⁻⁴ m².

  3. 3. Two bars of the same length and area are joined end to end. Bar P has three times the conductivity of bar Q. The free end of P is at 100 °C and that of Q at 0 °C. What is the junction temperature?

    1. 25 °C
    2. 50 °C
    3. 75 °C
    4. 33 °C
    Show answer

    Answer: C. T₀ = (K_P × 100 + K_Q × 0)/(K_P + K_Q) = (3K × 100)/(4K) = 75 °C. The better conductor has the smaller temperature drop (25 °C) across it.

  4. 4. Why does a sea breeze blow from sea to land during a sunny day?

    1. The sea heats up faster than the land
    2. The land heats up faster, the air above it rises, and cooler air from over the sea moves in to replace it
    3. Air always moves from low pressure to high pressure
    4. Radiation from the sea pushes the air
    Show answer

    Answer: B. Land has a smaller specific heat and does not mix heat downward, so it warms faster. Warm, light air rises over the land and cooler air from over the sea flows in at the surface: a convection cycle.

  5. 5. Which statement about convection is correct?

    1. It can take place in solids and in a vacuum
    2. It works without any temperature difference
    3. It is the main way heat reaches the Earth from the Sun
    4. It needs bulk motion of a fluid; in the human body the heart drives forced convection
    Show answer

    Answer: D. Convection carries heat by moving the fluid itself, so it needs a fluid and cannot happen in a solid or a vacuum. Blood pumped by the heart is an example of forced convection. Heat from the Sun arrives by radiation.

Privacy · Terms · Refunds · Delivery