- Foundation
- About 25 min
- 15 practice questions
Final self-assessment: Waves
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 25 minutes, with a rough sheet for the numericals and without looking back at the lessons. Use the speed of sound given in each question. Check your answers only after you finish, and read every explanation, including those for questions you got right.
Final self-assessment
-
1. Which kind of wave can travel through steel, water and air alike?
- Transverse mechanical waves
- Longitudinal mechanical waves
- Only electromagnetic waves
- Surface waves only
Show answer
Answer: B. Every elastic medium resists compression, so longitudinal waves travel in solids, liquids and gases. Transverse mechanical waves need a medium that resists shear, which water and air do not.
-
2. Thunder is heard 4.5 s after the lightning is seen. Taking the speed of sound as 340 m s⁻¹, how far away was the lightning?
- 1.5 km
- 76 m
- 3.1 km
- 0.75 km
Show answer
Answer: A. Light arrives almost instantly, so distance ≈ 340 × 4.5 = 1530 m ≈ 1.5 km.
-
3. Assertion (A): When a wave passes through a medium, the particles of the medium travel along with the wave. Reason (R): Waves transfer energy from one place to another.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: D. R is true: waves carry energy. But the particles only oscillate about their mean positions; the medium as a whole does not travel with the wave, so A is false.
-
4. A wave is y = 0.03 sin(0.5πx − 40πt) in SI units. What is its speed?
- 20 m s⁻¹
- 80 m s⁻¹
- 0.0125 m s⁻¹
- 40 m s⁻¹
Show answer
Answer: B. v = ω/k = 40π/(0.5π) = 80 m s⁻¹. (λ = 4 m and ν = 20 Hz, and νλ = 80 m s⁻¹ agrees.)
-
5. For the same wave, y = 0.03 sin(0.5πx − 40πt), what is the maximum speed of a particle of the medium?
- 3.8 m s⁻¹
- 80 m s⁻¹
- 1.2 m s⁻¹
- 0.03 m s⁻¹
Show answer
Answer: A. Each particle performs SHM of amplitude a = 0.03 m and angular frequency ω = 40π rad s⁻¹, so its maximum speed is aω = 0.03 × 40π ≈ 3.8 m s⁻¹. This is quite different from the wave speed of 80 m s⁻¹.
-
6. A wave of frequency 500 Hz travels at 300 m s⁻¹. What is the phase difference between two points 10 cm apart along its path?
- π/6
- π/3
- π/2
- 2π/3
Show answer
Answer: B. λ = v/ν = 300/500 = 0.60 m. Δφ = (2π/λ)Δx = (2π/0.60) × 0.10 = π/3.
-
7. A wire 1.5 m long has a mass of 6.0 g and is under a tension of 160 N. The speed of transverse waves on it is
- 163 m s⁻¹
- 40 m s⁻¹
- 200 m s⁻¹
- 4.0 × 10⁴ m s⁻¹
Show answer
Answer: C. μ = 6.0 × 10⁻³/1.5 = 4.0 × 10⁻³ kg m⁻¹. v = √(T/μ) = √(160/4.0 × 10⁻³) = √(4.0 × 10⁴) = 200 m s⁻¹.
-
8. The speed of sound in air is 340 m s⁻¹ at 300 K. Assuming v ∝ √T at constant pressure, what is it at 400 K?
- 453 m s⁻¹
- 255 m s⁻¹
- 393 m s⁻¹
- 340 m s⁻¹
Show answer
Answer: C. v = √(γRT/M₀) ∝ √T. v(400 K) = 340 × √(400/300) = 340 × 1.155 ≈ 393 m s⁻¹.
-
9. Newton's formula v = √(P/ρ) gives a speed of sound in air about 15% lower than the measured value because Newton assumed that
- air is incompressible
- the density of air is zero
- sound waves in air are transverse
- the compressions and rarefactions are isothermal, whereas they are actually adiabatic
Show answer
Answer: D. For isothermal changes the bulk modulus is P. The changes in sound are too fast for heat exchange, so they are adiabatic with bulk modulus γP. Laplace's v = √(γP/ρ) agrees with experiment.
-
10. Two waves of equal amplitude 3.0 mm and the same frequency overlap with a phase difference of π/2. The resultant amplitude is about
- 6.0 mm
- 3.0 mm
- 4.2 mm
- Zero
Show answer
Answer: C. A = 2a cos(φ/2) = 2 × 3.0 × cos(π/4) = 6.0 × 0.707 ≈ 4.2 mm.
-
11. A standing wave on a string is y = 0.04 sin(πx/3) cos(120πt) in SI units. What is the distance between two adjacent nodes?
- 6 m
- 1.5 m
- 3 m
- 0.75 m
Show answer
Answer: C. k = π/3 rad m⁻¹, so λ = 2π/k = 6 m. Adjacent nodes are λ/2 = 3 m apart.
-
12. One end of a string is tied to a light ring that slides freely on a smooth vertical rod. A pulse sent along the string is reflected at the ring. The reflected pulse
- is not inverted: there is no phase change at a free end
- is inverted, with a phase change of π
- vanishes at the ring
- travels faster than the incident pulse
Show answer
Answer: A. A freely moving end is an open (free) boundary. The reflected pulse has the same phase and orientation as the incident one, and the ring moves with twice the pulse's amplitude. Inversion happens only at a rigid end.
-
13. A string 1.2 m long, fixed at both ends, has a fundamental frequency of 150 Hz. What is the frequency of its third harmonic?
- 50 Hz
- 300 Hz
- 450 Hz
- 600 Hz
Show answer
Answer: C. For a string fixed at both ends νₙ = nν₁, so ν₃ = 3 × 150 = 450 Hz. (The wave speed is 2Lν₁ = 2 × 1.2 × 150 = 360 m s⁻¹.)
-
14. A pipe closed at one end has a fundamental frequency of 200 Hz. If the closed end is opened, the new fundamental frequency is
- 100 Hz
- 200 Hz
- 600 Hz
- 400 Hz
Show answer
Answer: D. Closed: ν₁ = v/(4L) = 200 Hz. Open at both ends: ν₁ = v/(2L) = 2 × 200 = 400 Hz.
-
15. Tuning fork P (384 Hz) gives 6 beats per second with fork Q. When Q is loaded with a little wax, the beats fall to 2 per second. What was the original frequency of Q?
- 378 Hz
- 390 Hz
- 386 Hz
- 382 Hz
Show answer
Answer: B. Q was 378 Hz or 390 Hz. Wax lowers Q's frequency. From 390 Hz, lowering brings it closer to 384 Hz and reduces the beats, as observed (to about 386 Hz). From 378 Hz, lowering would increase the beats. So Q was 390 Hz.
Questions 1-3: lesson 1 (what a wave is). Questions 4-6: lesson 2 (displacement relation). Questions 7-9: lesson 3 (wave speed and the speed of sound). Questions 10-12: lesson 4 (superposition, reflection and standing waves). Questions 13-15: lesson 5 (normal modes and beats).
Sign in to keep track of the lessons you finish.