Revision notes

Chapter 8 Controlling: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Meaning and importance of controlling

Controlling is the process of making sure that actual activities conform to planned activities: setting standards, measuring performance, finding deviations and correcting them.

Controlling brings the management cycle back to planning

  1. Planning Goals and standards are set.
  2. Organising, staffing and directing The plan is carried out.
  3. Controlling Actual performance is compared with standards; causes of deviations are found.
  4. Lessons for the next plan Problems identified feed into better planning.

Then back to step 1: Planning

Importance of controlling

  • Accomplishing organisational goals Measures progress, reveals deviations and indicates corrective action.
  • Judging accuracy of standards Checks whether standards are accurate and objective; revises them as conditions change.
  • Making efficient use of resources Reduces wastage and spoilage; work follows standards.
  • Improving employee motivation Employees know in advance what is expected and how they will be judged.
  • Ensuring order and discipline Close checks minimise dishonest behaviour.
  • Facilitating coordination in action Every department works to well-coordinated standards.

Key takeaways: controlling ensures that activities follow plans and that resources are used effectively and efficiently. It is goal-oriented and pervasive, and it is not merely the last function: it completes the cycle and improves future planning. It helps accomplish goals, judge the accuracy of standards, use resources efficiently, motivate employees, ensure order and discipline, and coordinate action.

Read the full lesson

Lesson 2

Limitations of controlling and its relationship with planning

Limitations of controlling

  • Difficulty in setting quantitative standards Morale, satisfaction and behaviour are hard to measure.
  • Little control on external factors Government policy, technology and competition are outside the firm.
  • Resistance from employees Control seen as a restriction on freedom.
  • Costly affair Expense, time and effort; costs must not exceed benefits.

Planning and controlling

  • Planning
    • Sets objectives and standards
    • Prescriptive; an intellectual process
    • Looks ahead, but uses past experience
    • Prerequisite for controlling
  • Controlling
    • Measures performance against standards
    • Evaluative; checks results
    • Looks back, but improves future performance
    • Improves the next round of planning

Planning and controlling are inseparable twins: planning without controlling is meaningless, and controlling without planning is blind. Both look ahead and look back.

Key takeaways: controlling is limited by difficulty in setting quantitative standards, little control over external factors, employee resistance and cost. Planning and controlling are inseparable twins: planning provides standards and controlling checks them; planning without controlling is meaningless and controlling without planning is blind. Planning is prescriptive and controlling evaluative, but both look backward as well as forward and reinforce each other.

Read the full lesson

Lesson 3

The controlling process: standards, measurement and comparison

Steps in the controlling process

  1. Setting performance standards Criteria or benchmarks for measuring performance.
  2. Measurement of actual performance Objective, reliable measurement, in the same units as standards.
  3. Comparison of actual performance with standards Reveals the deviation.
  4. Analysing deviations Decide which deviations matter and find their causes.
  5. Taking corrective action Correct significant deviations, or revise standards.
Examples of standards in functional areas (from the textbook's list)
ProductionMarketingHuman resource managementFinance and accounting
QuantitySales volumeLabour relationsCapital expenditure
QualitySales expenseLabour turnoverInventories
CostAdvertising expenditureLabour absenteeismFlow of capital
Individual job performanceSalesperson's performanceIndividual performanceLiquidity

Deviation = actual performance − standard. Comparison is easy when standards are set in quantitative terms and measured in the same units.

Key takeaways: the controlling process has five steps: setting standards, measuring actual performance, comparing actual with standards, analysing deviations and taking corrective action. Standards should be precise and quantitative where possible, measurable where qualitative, and flexible. Measurement should be objective, in the same units as standards and, where possible, during the work, using observation, sample checking, reports and ratios. Comparison reveals the deviation.

Read the full lesson

Lesson 4

Analysing deviations: critical point control and management by exception

Critical point control and management by exception

  • Critical point control
    • Focuses on key result areas
    • Asks: which activities matter most?
    • Small changes at critical points get attention
  • Management by exception
    • Focuses on deviations beyond the permissible limit
    • Asks: which deviations are significant?
    • Routine deviations are left to subordinates
Advantages of critical point control and management by exception
AdvantageExplanation
Saves time and effortManagers deal only with significant deviations
Focuses attention on important areasBetter use of managerial talent
Facilitates delegationRoutine problems left to subordinates, which raises their morale
Identifies critical problemsProblems needing timely action are spotted early

Critical point control: watch the key result areas. Management by exception: report only deviations beyond the permissible limit. Trying to control everything ends in controlling nothing.

Possible causes of deviations

  • Unrealistic standards
  • Defective process
  • Inadequacy of resources
  • Structural drawbacks
  • Organisational constraints
  • Environmental factors beyond control
Cost report of a made-up firm (illustrative, ₹)
Cost itemBudget (₹)Actual (₹)Deviation (₹)Deviation (%)Report to management?
Labour5,00,0005,25,00025,0005.0Yes, urgently
Power1,00,0001,01,5001,5001.5No
Stationery20,00020,3003001.5No
Raw material8,00,0008,24,00024,0003.0Yes

Key takeaways: managers fix an acceptable range of deviation and give priority to deviations in key areas. Critical point control focuses on key result areas; management by exception reports only significant deviations beyond the permissible limit. Together they save time, focus attention, help delegation and spot critical problems. Causes of deviations include unrealistic standards, defective processes, inadequate resources, structural drawbacks, organisational constraints and environmental factors.

Read the full lesson

Lesson 5

Taking corrective action and the whole control process

Causes of deviations and possible corrective actions
Cause of deviationPossible corrective action
Defective materialChange the quality specification for materials
Defective machineryRepair the existing machinery or replace it
Obsolete machineryUpgrade the technology
Defective processModify the existing process
Defective physical conditions of workImprove the physical conditions of work
Ineffective trainingIntroduce new training programmes
Ineffective supervisionChange the supervisor or motivate supervisors
Absence of motivationIntroduce new incentive plans
Unrealistic standardsRevise the standards

Corrective action: none if within limits; act on significant deviations by removing their cause; revise standards if the deviation cannot be corrected by managerial action.

The control loop

  1. Set standards From plans.
  2. Measure performance Objectively, in the same units.
  3. Compare Find the deviation.
  4. Analyse Significant deviations and their causes.
  5. Correct Remove causes or revise standards; feed into new plans.

Then back to step 1: Set standards

Key takeaways: corrective action is needed only for deviations beyond acceptable limits, especially in key areas. Remedies depend on causes: change material specifications, repair or replace machinery, upgrade technology, modify processes, improve conditions, train, change or motivate supervisors, introduce incentives, or revise unrealistic standards. The five steps form a loop that feeds back into planning.

Read the full lesson

Privacy · Terms · Refunds · Delivery