• Foundation
  • About 20 min
  • 5 practice questions

Effect of temperature and catalysts: Arrhenius equation and collision theory

Use the Arrhenius equation to relate rate constant, temperature and activation energy, explain the effect of temperature with the Maxwell–Boltzmann distribution, explain how a catalyst works, and state the collision theory with the steric factor.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the Arrhenius equation and explain the meaning of A, Ea and e^(−Ea/RT).
  • Calculate Ea from rate constants at two temperatures, or k at a new temperature.
  • Explain with the Maxwell–Boltzmann distribution why a 10 K rise can roughly double a rate.
  • Explain how a catalyst works and state the main ideas of collision theory.

Milk keeps longer in a refrigerator, and food cooks faster in a pressure cooker. For many reactions near room temperature, a rise of 10 degrees roughly doubles the rate constant. Why such a large effect from a small change? The answer lies in the energy barrier every reaction must cross, the activation energy.

The Arrhenius equation

k = A e^(−Ea/RT), where A is the Arrhenius (frequency or pre-exponential) factor, Ea the activation energy in J mol⁻¹, R = 8.314 J K⁻¹ mol⁻¹ and T the temperature in kelvin.

Taking natural logarithms: ln k = ln A − Ea ÷ RT. A graph of ln k against 1/T is a straight line with slope −Ea/R and intercept ln A. Writing the equation at two temperatures and subtracting gives the working form:
log (k₂ ÷ k₁) = [Ea ÷ (2.303 R)] × [(T₂ − T₁) ÷ (T₁T₂)].
The equation shows that raising T or lowering Ea increases k exponentially.

Activation energy and the activated complex

Arrhenius proposed that reactants must first form an unstable, high-energy arrangement, the activated complex, which exists for a very short time before breaking into products. For H₂(g) + I₂(g) → 2HI(g), an H₂ molecule and an I₂ molecule collide to form such a complex, which then splits into two HI molecules. The extra energy needed to reach the activated complex from the reactants is the activation energy, Ea. The enthalpy change of the reaction depends only on the energies of reactants and products, not on the height of the barrier.

Why temperature matters so much

Molecules in a sample do not all have the same kinetic energy. Maxwell and Boltzmann described the spread statistically: a graph of the fraction of molecules with a given energy against energy rises to a peak (the most probable kinetic energy) and then tails off. When the temperature rises, the peak moves to higher energy and the curve flattens and spreads to the right; the total area stays the same because the fractions must add up to one. The key point is the tail beyond Ea: only molecules there can react. A 10 K rise roughly doubles the area of that tail, so the rate roughly doubles. In the Arrhenius equation, e^(−Ea/RT) is the fraction of molecules with energy equal to or greater than Ea.

Worked example 1: activation energy from a doubling of rate

The rate constant of a reaction doubles when the temperature is raised from 300 K to 310 K. Find Ea.

log (k₂ ÷ k₁) = log 2 = 0.301.
0.301 = [Ea ÷ (2.303 × 8.314)] × [(310 − 300) ÷ (300 × 310)]
Ea = 0.301 × 2.303 × 8.314 × 93 000 ÷ 10
= 0.301 × 19.147 × 9300 = 5.36 × 10⁴ J mol⁻¹ ≈ 53.6 kJ mol⁻¹.

Worked example 2: rate constant at a new temperature

A reaction has Ea = 50.0 kJ mol⁻¹ and k = 1.0 × 10⁻³ s⁻¹ at 300 K. Find k at 320 K.

log (k₂ ÷ k₁) = [50 000 ÷ (2.303 × 8.314)] × [(320 − 300) ÷ (300 × 320)]
= 2611 × (20 ÷ 96 000) = 2611 × 2.083 × 10⁻⁴ = 0.544.
k₂ ÷ k₁ = 10^0.544 = 3.50, so k₂ = 3.5 × 10⁻³ s⁻¹. A 20 K rise more than triples the rate constant.

Worked example 3: fraction of molecules above Ea

What fraction of molecules has energy at least equal to Ea = 50.0 kJ mol⁻¹ at 300 K?

Ea ÷ RT = 50 000 ÷ (8.314 × 300) = 20.05.
Fraction = e^(−20.05) ≈ 2.0 × 10⁻⁹: only about two molecules in a billion. This is why the rate is so sensitive to small changes that enlarge the tail.

Effect of a catalyst

A catalyst increases the rate of a reaction without itself undergoing any permanent chemical change; MnO₂, for example, speeds up 2KClO₃ → 2KCl + 3O₂. (A substance that slows a reaction is called an inhibitor, not a catalyst.) By the intermediate complex theory, the catalyst forms temporary bonds with the reactants, giving an intermediate that breaks down into products and regenerates the catalyst. This opens an alternative pathway with lower activation energy, so by the Arrhenius equation k increases.

What a catalyst does and does not do

  • Does
    • Lowers activation energy by an alternative path
    • Speeds up forward and backward reactions equally
    • Helps equilibrium to be reached sooner
    • Works in small amounts
  • Does not
    • Change ΔG of the reaction
    • Make a non-spontaneous reaction happen
    • Change the equilibrium constant
    • Get used up permanently

Collision theory

Developed by Max Trautz and William Lewis, collision theory treats molecules as hard spheres that react only when they collide. The number of collisions per second per unit volume is the collision frequency, Z. For A + B → products, Rate = Z_AB e^(−Ea/RT), so A in the Arrhenius equation is related to collision frequency. But for complex molecules this overestimates the rate, because not every energetic collision works: the molecules must also hit with the proper orientation to break and form the right bonds. An effective collision needs both enough energy (the threshold energy) and proper orientation. Including a probability or steric factor P: Rate = P Z_AB e^(−Ea/RT). The theory's weakness is that it treats molecules as structureless spheres.

Key takeaways

  • k = A e^(−Ea/RT); ln k against 1/T has slope −Ea/R.
  • log (k₂/k₁) = [Ea ÷ 2.303R] × [(T₂ − T₁) ÷ T₁T₂].
  • Higher temperature enlarges the fraction of molecules with energy ≥ Ea.
  • A catalyst lowers Ea but does not change ΔG or K; effective collisions need energy and orientation.

Check your understanding

  1. 1. For a reaction, a plot of ln k against 1/T is a straight line with slope −6000 K. What is its activation energy? (R = 8.314 J K⁻¹ mol⁻¹)

    1. 49.9 kJ mol⁻¹
    2. 6.0 kJ mol⁻¹
    3. 722 J mol⁻¹
    4. 115 kJ mol⁻¹
    Show answer

    Answer: A. Slope = −Ea/R, so Ea = 6000 × 8.314 = 49 884 J mol⁻¹ ≈ 49.9 kJ mol⁻¹.

  2. 2. What does the term e^(−Ea/RT) in the Arrhenius equation represent?

    1. The total number of collisions per second
    2. The fraction of molecules with energy equal to or greater than Ea
    3. The enthalpy change of the reaction
    4. The fraction of collisions with correct orientation
    Show answer

    Answer: B. e^(−Ea/RT) is the Boltzmann factor: the fraction of molecules having at least the activation energy. Collision frequency is linked to A, and orientation is accounted for separately by the steric factor P.

  3. 3. A catalyst is added to a reaction at equilibrium. Which statement is correct?

    1. The equilibrium constant increases
    2. Only the forward reaction speeds up
    3. Both forward and backward reactions speed up equally, so K is unchanged
    4. ΔG of the reaction becomes more negative
    Show answer

    Answer: C. A catalyst lowers the activation energy for the forward and backward reactions by the same amount, so both rate constants rise by the same factor and their ratio K is unchanged. It does not change ΔG.

  4. 4. Why does a rise of 10 K roughly double the rate of many reactions, although the average kinetic energy rises only slightly?

    1. The activation energy halves
    2. The number of molecules doubles
    3. The steric factor doubles
    4. The fraction of molecules with energy above Ea roughly doubles
    Show answer

    Answer: D. A small shift of the Maxwell–Boltzmann curve to higher energies greatly enlarges the small tail of molecules beyond Ea. For many reactions this area about doubles for a 10 K rise, so the rate about doubles. Ea itself does not change with temperature.

  5. 5. Assertion (A): All collisions between reactant molecules with energy greater than the threshold energy lead to products. Reason (R): Molecules must also collide with proper orientation for a collision to be effective.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: D. A is false: energy alone is not enough, and many energetic collisions fail because the molecules are wrongly oriented. R is true: effective collisions need both sufficient energy and proper orientation, which is why the steric factor P is included.

Privacy · Terms · Refunds · Delivery