- Foundation
- About 20 min
- 5 practice questions
Rate law, order and molecularity
Write a rate law, find orders and the rate constant from initial-rate data, give the units of k for each order, and distinguish order from molecularity, elementary from complex reactions and identify the rate-determining step.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define rate law, rate constant and order of reaction.
- Find the order with respect to each reactant from initial-rate data.
- Deduce the units of k from the order, and the order from the units of k.
- Distinguish order from molecularity and explain the rate-determining step.
If you double the amount of one reactant, does the reaction go twice as fast, four times as fast, or no faster at all? The answer cannot be read from the balanced equation; it must be measured. The equation that records the answer is the rate law.
Rate law and rate constant
For aA + bB → cC + dD, experiments give a relation of the form Rate = k [A]ˣ [B]ʸ, or in differential form −d[R]/dt = k[A]ˣ[B]ʸ. This is the rate law (rate equation, rate expression). The proportionality constant k is the rate constant: the rate when every concentration is 1 mol L⁻¹. It depends on temperature but not on concentration. The exponents x and y may or may not equal the coefficients a and b.
| Reaction | Experimental rate law | Same as coefficients? |
|---|---|---|
| 2NO + O₂ → 2NO₂ | Rate = k[NO]²[O₂] | Yes |
| CHCl₃ + Cl₂ → CCl₄ + HCl | Rate = k[CHCl₃][Cl₂]^½ | No |
| CH₃COOC₂H₅ + H₂O → CH₃COOH + C₂H₅OH | Rate = k[CH₃COOC₂H₅]¹[H₂O]⁰ | No |
Order of a reaction
x is the order with respect to A, y the order with respect to B, and x + y is the overall order: the sum of the powers of the concentrations in the rate law. Order can be 0, 1, 2, 3 or even a fraction (and occasionally negative). Zero order means the rate does not depend on the concentration of that reactant.
Worked example 1: order from initial rates
For A + B → products, initial rates were measured (practice data):
Experiment 1: [A] = 0.10, [B] = 0.10 mol L⁻¹, rate = 2.0 × 10⁻³ mol L⁻¹ s⁻¹.
Experiment 2: [A] = 0.20, [B] = 0.10, rate = 8.0 × 10⁻³.
Experiment 3: [A] = 0.10, [B] = 0.20, rate = 4.0 × 10⁻³.
Find the rate law and k.
Compare 1 and 2 ([B] fixed): [A] doubles, rate × 4 = 2², so order in A = 2.
Compare 1 and 3 ([A] fixed): [B] doubles, rate × 2 = 2¹, so order in B = 1.
Rate = k[A]²[B]; overall order 3.
k = rate ÷ ([A]²[B]) = 2.0 × 10⁻³ ÷ (0.10² × 0.10) = 2.0 × 10⁻³ ÷ 1.0 × 10⁻³ = 2.0 L² mol⁻² s⁻¹.
Worked example 2: overall order from a rate law
Find the overall order for (a) Rate = k[A][B]^½ and (b) Rate = k[A]²[B]⁻¹.
(a) 1 + ½ = 3/2 (order one and a half). (b) 2 + (−1) = 1 (first order overall).
Units of the rate constant
From Rate = k[A]ⁿ, k = Rate ÷ [A]ⁿ, so the unit of k is (mol L⁻¹)¹⁻ⁿ s⁻¹.
| Overall order | Units of k (mol, L, s) |
|---|---|
| 0 | mol L⁻¹ s⁻¹ |
| 1 | s⁻¹ |
| 2 | L mol⁻¹ s⁻¹ |
| 3 | L² mol⁻² s⁻¹ |
So a rate constant of 3 × 10⁻⁴ s⁻¹ belongs to a first order reaction, and 2.3 × 10⁻⁵ L mol⁻¹ s⁻¹ to a second order reaction.
Elementary and complex reactions; molecularity
A reaction that takes place in one step is an elementary reaction. Most reactions are complex: they go through a sequence of elementary steps, the mechanism. Examples are consecutive reactions (ethane is oxidised to CO₂ and water through alcohol, aldehyde and acid), reversible reactions and side reactions (nitration of phenol gives both o- and p-nitrophenol).
The molecularity of an elementary reaction is the number of reacting species (atoms, ions or molecules) that must collide at the same time for the reaction to occur. Unimolecular: NH₄NO₂ → N₂ + 2H₂O. Bimolecular: 2HI → H₂ + I₂. Termolecular: 2NO + O₂ → 2NO₂. A simultaneous collision of more than three particles is so unlikely that molecularity above three is not met; a reaction such as KClO₃ + 6FeSO₄ + 3H₂SO₄ → products must happen in several steps (it is found to be second order).
The rate-determining step
In a relay race the team's time depends most on its slowest runner. Likewise the slowest step of a mechanism, the rate-determining step, controls the overall rate. The decomposition of H₂O₂ catalysed by iodide ions in alkaline medium, 2H₂O₂ → 2H₂O + O₂, has the rate law Rate = k[H₂O₂][I⁻]. It is thought to occur in two bimolecular steps:
(1) H₂O₂ + I⁻ → H₂O + IO⁻ (slow)
(2) H₂O₂ + IO⁻ → H₂O + I⁻ + O₂ (fast)
IO⁻ is an intermediate: formed and used up, it does not appear in the overall equation. The slow step contains one H₂O₂ and one I⁻, matching the rate law.
Order versus molecularity
-
Order
- Found by experiment
- Can be 0, a fraction or even negative
- Defined for elementary and complex reactions
- For a complex reaction it is set by the slowest step
-
Molecularity
- A theoretical idea about one step
- Always a whole number: 1, 2 or 3; never zero
- Meaningful only for elementary reactions
- For an elementary reaction it equals the order
Key takeaways
- Rate = k[A]ˣ[B]ʸ; x and y are found by experiment, not from coefficients.
- Overall order = x + y; units of k = (mol L⁻¹)¹⁻ⁿ s⁻¹.
- Molecularity is the number of species colliding in one elementary step (1–3).
- The slowest step of a mechanism determines the rate.
Check your understanding
-
1. A reaction is second order in X. If [X] is made four times larger, how does the rate change?
- It becomes 4 times larger
- It becomes 8 times larger
- It becomes 16 times larger
- It does not change
Show answer
Answer: C. Rate = k[X]². With [X] × 4, the rate is multiplied by 4² = 16.
-
2. What is the overall order of a reaction with Rate = k[A]^½[B]²?
- 2.5
- 2
- 1
- 0.5
Show answer
Answer: A. Overall order is the sum of the exponents: ½ + 2 = 2.5.
-
3. The rate constant of a reaction is 5.0 × 10⁻³ L mol⁻¹ s⁻¹. What is its order?
- Zero
- First
- Third
- Second
Show answer
Answer: D. Units of k are (mol L⁻¹)¹⁻ⁿ s⁻¹. For n = 2 this is (mol L⁻¹)⁻¹ s⁻¹ = L mol⁻¹ s⁻¹, which matches, so the reaction is second order.
-
4. Which statement about molecularity is correct?
- It can be zero for some reactions
- It is defined only for elementary reactions and is a whole number
- It is always equal to the overall order of a complex reaction
- It can be a fraction
Show answer
Answer: B. Molecularity counts the particles colliding in a single elementary step, so it is always 1, 2 or 3, never zero or fractional, and has no meaning for a complex reaction as a whole.
-
5. In an experiment, doubling [A] with [B] fixed doubles the rate, while doubling [B] with [A] fixed leaves the rate unchanged. What is the rate law?
- Rate = k[A]
- Rate = k[A][B]
- Rate = k[A]²
- Rate = k[B]
Show answer
Answer: A. Doubling [A] doubles the rate, so the order in A is 1. Changing [B] has no effect, so the order in B is 0 and [B]⁰ = 1. The rate law is Rate = k[A].
Sign in to keep track of the lessons you finish.